최근 치과 임플란트의 성패에 임플란트 표면의 미세구조가 영향을 미친다고 보고되고 있다. 이 실험은 치과용 임플란트를 매식할 때 임플란트 표면처리의 차이가 골과 임플란트의 결합에 미치는 영향을 조직학적 및 조직계측학적 분석 그리고 생체역학적 검사를 통하여 평가하고자 하였다. 영구치가 완전히 맹출된 체중 15Kg 내외의 성견 6마리의 하악 소구치를 모두 발치하고 1개월 후 표면처리가 다른 3종의 임플란트를 매식하였다. 실험군은 모두 세 군이며, 제 1군은 시판중인 표면처리를 하지 않은 평활한 표면을 갖는 나사형의 순수 타이타늄 임플란트(Steri-Oss^□, Bausch & Lim Co., U.S.A.)를 매식한 군, 제 2군은 화학적 산처리를 한 순수 타이타늄 임플란트(Osseotite^□, Implant Innovations, Inc., U.S.A.)를 매식한 군, 제 3군은 sandblasting과 화학적 산처리를 한 순수 타이타늄 임플란트(ITI-SLA^□, Straumann, Germany)를 매식한 군으로 하였다. 술후 2주, 4주, 12주의 희생 3일 전에 각각 calcein, osytetracycline ...
최근 치과 임플란트의 성패에 임플란트 표면의 미세구조가 영향을 미친다고 보고되고 있다. 이 실험은 치과용 임플란트를 매식할 때 임플란트 표면처리의 차이가 골과 임플란트의 결합에 미치는 영향을 조직학적 및 조직계측학적 분석 그리고 생체역학적 검사를 통하여 평가하고자 하였다. 영구치가 완전히 맹출된 체중 15Kg 내외의 성견 6마리의 하악 소구치를 모두 발치하고 1개월 후 표면처리가 다른 3종의 임플란트를 매식하였다. 실험군은 모두 세 군이며, 제 1군은 시판중인 표면처리를 하지 않은 평활한 표면을 갖는 나사형의 순수 타이타늄 임플란트(Steri-Oss^□, Bausch & Lim Co., U.S.A.)를 매식한 군, 제 2군은 화학적 산처리를 한 순수 타이타늄 임플란트(Osseotite^□, Implant Innovations, Inc., U.S.A.)를 매식한 군, 제 3군은 sandblasting과 화학적 산처리를 한 순수 타이타늄 임플란트(ITI-SLA^□, Straumann, Germany)를 매식한 군으로 하였다. 술후 2주, 4주, 12주의 희생 3일 전에 각각 calcein, osytetracycline HCl, alizarin red를 투여하였으며, 4주 및 12주 후에 3마리식 희생시켜 조직학적으로 평가하고 골과 임플란트 계면의 골 접촉율을 구하였다. 12주 희생군에서 일부 시편의 뒤틀림 제거력을 측정하여 다음과 같은 결과를 얻었다. 광학현미경으로 관찰시 모든 군에서 임플란트와 골이 접촉되는 소견을 보였고, 매식 후 12주째에는 4주에 비하여 골조직이 더 성숙되어 임플란트 계면에서는 층판골로 치밀한 결합양상을 보였으며 모든 군에서 골성숙도의 차이가 없이 유사한 소견을 보였다. 형광현미경적 소견에서 골과 임플란트 계면은 제 1군과 2군에서는 일부 나사선에서만 녹색 혹은 황색의 형광대가 관찰되었지만, 제 3군에서는 임플란트의 최상방 부위를 제외하고는 모든 나사산 부위에서 균일한 두께의 녹색과 황색의 형광대가 관찰되었다. 조직계측학적 분석에서 골 접촉율은 4주 후에 제 3군(66.2%), 2군(57.7%), 1군(54.3%)의 순으로 제 2군과 3군이 1군에 비하여 유의한 차이를 보였다(p<0.05). 12주 후 골 접촉율은 제 1군과 2군에서 4주에 비하여 유의하게 증가하였고 제 3군(71.2%), 2군(66.7%), 1군(64.3%)의 순으로 우수하였으나 군간의 유의한 차이는 없었다. 12주째 각 군의 뒤틀림 제거력은 제 3군(90.85 Ncm), 2군(81.63 Ncm), 1군(77.13 Ncm)의 순이었으며, 제 3군은 1군에 비하여 유의하게 컸다(p<0.05). 이상으로부터 평활한 표면을 갖는 타이타늄 임플란트 보다 표면처리가 된 임플란트에서 골 치유에 더 좋은 결과를 얻을 수 있었고, 특히 임플란트 표면에 sandblasting과 화학적 산처리를 한 경우가 짧은 기간에 양호한 골 치유 양상을 보여 전체적인 임플란트의 치료기간을 단축시킬 수 있을 것으로 생각된다.
최근 치과 임플란트의 성패에 임플란트 표면의 미세구조가 영향을 미친다고 보고되고 있다. 이 실험은 치과용 임플란트를 매식할 때 임플란트 표면처리의 차이가 골과 임플란트의 결합에 미치는 영향을 조직학적 및 조직계측학적 분석 그리고 생체역학적 검사를 통하여 평가하고자 하였다. 영구치가 완전히 맹출된 체중 15Kg 내외의 성견 6마리의 하악 소구치를 모두 발치하고 1개월 후 표면처리가 다른 3종의 임플란트를 매식하였다. 실험군은 모두 세 군이며, 제 1군은 시판중인 표면처리를 하지 않은 평활한 표면을 갖는 나사형의 순수 타이타늄 임플란트(Steri-Oss^□, Bausch & Lim Co., U.S.A.)를 매식한 군, 제 2군은 화학적 산처리를 한 순수 타이타늄 임플란트(Osseotite^□, Implant Innovations, Inc., U.S.A.)를 매식한 군, 제 3군은 sandblasting과 화학적 산처리를 한 순수 타이타늄 임플란트(ITI-SLA^□, Straumann, Germany)를 매식한 군으로 하였다. 술후 2주, 4주, 12주의 희생 3일 전에 각각 calcein, osytetracycline HCl, alizarin red를 투여하였으며, 4주 및 12주 후에 3마리식 희생시켜 조직학적으로 평가하고 골과 임플란트 계면의 골 접촉율을 구하였다. 12주 희생군에서 일부 시편의 뒤틀림 제거력을 측정하여 다음과 같은 결과를 얻었다. 광학현미경으로 관찰시 모든 군에서 임플란트와 골이 접촉되는 소견을 보였고, 매식 후 12주째에는 4주에 비하여 골조직이 더 성숙되어 임플란트 계면에서는 층판골로 치밀한 결합양상을 보였으며 모든 군에서 골성숙도의 차이가 없이 유사한 소견을 보였다. 형광현미경적 소견에서 골과 임플란트 계면은 제 1군과 2군에서는 일부 나사선에서만 녹색 혹은 황색의 형광대가 관찰되었지만, 제 3군에서는 임플란트의 최상방 부위를 제외하고는 모든 나사산 부위에서 균일한 두께의 녹색과 황색의 형광대가 관찰되었다. 조직계측학적 분석에서 골 접촉율은 4주 후에 제 3군(66.2%), 2군(57.7%), 1군(54.3%)의 순으로 제 2군과 3군이 1군에 비하여 유의한 차이를 보였다(p<0.05). 12주 후 골 접촉율은 제 1군과 2군에서 4주에 비하여 유의하게 증가하였고 제 3군(71.2%), 2군(66.7%), 1군(64.3%)의 순으로 우수하였으나 군간의 유의한 차이는 없었다. 12주째 각 군의 뒤틀림 제거력은 제 3군(90.85 Ncm), 2군(81.63 Ncm), 1군(77.13 Ncm)의 순이었으며, 제 3군은 1군에 비하여 유의하게 컸다(p<0.05). 이상으로부터 평활한 표면을 갖는 타이타늄 임플란트 보다 표면처리가 된 임플란트에서 골 치유에 더 좋은 결과를 얻을 수 있었고, 특히 임플란트 표면에 sandblasting과 화학적 산처리를 한 경우가 짧은 기간에 양호한 골 치유 양상을 보여 전체적인 임플란트의 치료기간을 단축시킬 수 있을 것으로 생각된다.
It is well known that the apposition of bone at implant surface would be influenced by the microstructure of titanium implants. The purpose of this study was to compare bone healing around the screw-shaped titanium implant with three different surface topographies in the canine mandibles by histolog...
It is well known that the apposition of bone at implant surface would be influenced by the microstructure of titanium implants. The purpose of this study was to compare bone healing around the screw-shaped titanium implant with three different surface topographies in the canine mandibles by histological and biomechanical evaluation. All mandibular premolars of six mongrel dogs were extracted and implants were placed one month later. The pure titanium implants had different surface topographies: smooth and machined (Steri-Oss^□: Group I); acid-etched (Osseotite^□: Group II); sandblasted and acid-etched (ITI^□, SLA: Group III) surface. The fluorescent dyes were injected on the 2nd (calcein), 4th (oxy tetracycline HCl) and 12th (alizarin red) weeks of healing. Dogs were sacrificed at 4 and 12 weeks after implantation. The decalcified and undecalcified specimens were prepared for histological and histometrical evaluation of implant-bone contact. Some specimens at 12 weeks after implantation were used for removal torque testing. Histologically, direct bone apposition to implant surface was found in all of the treated groups. More mature and dense bone was observed at the implant-bone interface at 12 weeks than that at 4 weeks after implantation. Under the fluorescent microscope, thick regular green fluorescent lines which mean early bone apposition were observed at the implant-bone interface in Group III, while yellow and red fluorescent areas were found at the implant-bone interface in Group I and II. The average implant-bone contact ratios at 4 weeks of healing were 54.3% in Group I, 57.7% in Group II and 66.2% in Group III. In Group I, implant-bone contact ratio was significantly lower than Group II and III (p<0.05). The average implant-to-bone contact ratios at 12 weeks after implantation were 64.3% in Group I, 66.7% in Group II and 71.2% in Group III. There was no significant difference among the three groups. In Group I and II, the implant-bone contact ratio at 12 weeks increased significantly in comparison to ratio at 4 weeks (p<0.05). The removal torque values at 12 weeks after implantation were 90.9 Ncm in Group I, 81.6 Ncm in Group II and 77.1 Ncm in Group III, which were significantly different (p<0.05). These results suggest that bone healing begin earlier and be better around the surface-treated implants compared to the smooth surface implants. The sandblasted and acid-etched implants showed the most favorable bone response among the three groups during the early healing stage and could reduce the waiting period prior to implant loading.
It is well known that the apposition of bone at implant surface would be influenced by the microstructure of titanium implants. The purpose of this study was to compare bone healing around the screw-shaped titanium implant with three different surface topographies in the canine mandibles by histological and biomechanical evaluation. All mandibular premolars of six mongrel dogs were extracted and implants were placed one month later. The pure titanium implants had different surface topographies: smooth and machined (Steri-Oss^□: Group I); acid-etched (Osseotite^□: Group II); sandblasted and acid-etched (ITI^□, SLA: Group III) surface. The fluorescent dyes were injected on the 2nd (calcein), 4th (oxy tetracycline HCl) and 12th (alizarin red) weeks of healing. Dogs were sacrificed at 4 and 12 weeks after implantation. The decalcified and undecalcified specimens were prepared for histological and histometrical evaluation of implant-bone contact. Some specimens at 12 weeks after implantation were used for removal torque testing. Histologically, direct bone apposition to implant surface was found in all of the treated groups. More mature and dense bone was observed at the implant-bone interface at 12 weeks than that at 4 weeks after implantation. Under the fluorescent microscope, thick regular green fluorescent lines which mean early bone apposition were observed at the implant-bone interface in Group III, while yellow and red fluorescent areas were found at the implant-bone interface in Group I and II. The average implant-bone contact ratios at 4 weeks of healing were 54.3% in Group I, 57.7% in Group II and 66.2% in Group III. In Group I, implant-bone contact ratio was significantly lower than Group II and III (p<0.05). The average implant-to-bone contact ratios at 12 weeks after implantation were 64.3% in Group I, 66.7% in Group II and 71.2% in Group III. There was no significant difference among the three groups. In Group I and II, the implant-bone contact ratio at 12 weeks increased significantly in comparison to ratio at 4 weeks (p<0.05). The removal torque values at 12 weeks after implantation were 90.9 Ncm in Group I, 81.6 Ncm in Group II and 77.1 Ncm in Group III, which were significantly different (p<0.05). These results suggest that bone healing begin earlier and be better around the surface-treated implants compared to the smooth surface implants. The sandblasted and acid-etched implants showed the most favorable bone response among the three groups during the early healing stage and could reduce the waiting period prior to implant loading.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.