최근 콘크리트 구조물의 균열보수에 가장 많이 사용되는 에폭시수지는 접착성과 화학성이 우수하여 효과적인 균열 보수재료로 인식되어 왔으며, 이에 대한 연구가 최근 진행되고 있지만 에폭시수지의 균열보수에 대한 엄격한 규준이 없는 현실이다. 따라서 본 연구에서는 콘크리트 구조물의 부재에 가장 많이 적용되는 압축강도인 150㎏/㎠, 250㎏/㎠, 350㎏/㎠ 의 콘크...
최근 콘크리트 구조물의 균열보수에 가장 많이 사용되는 에폭시수지는 접착성과 화학성이 우수하여 효과적인 균열 보수재료로 인식되어 왔으며, 이에 대한 연구가 최근 진행되고 있지만 에폭시수지의 균열보수에 대한 엄격한 규준이 없는 현실이다. 따라서 본 연구에서는 콘크리트 구조물의 부재에 가장 많이 적용되는 압축강도인 150㎏/㎠, 250㎏/㎠, 350㎏/㎠ 의 콘크리트보에 가력장치를 이용하여 약 4, 5, 7 ton의 하중을 재하 함으로써 시험체에 0.2∼0.3㎜폭의 균열을 발생시킨 후, 국내에서 가장 많이 사용되고 있는 H사의 에폭시 수지를 선정하여 주제와 경화제의 혼합율을 3 1, 5 1, 7 1의 비율로 달리하여 균열을 저압저속주입공법으로 보수한 후, 파괴실험을 실시하여 균열에 대한 보수성능을 비교, 분석하였다. 본 연구 결과를 요약하면 압축강도의 증가에 따른 보수성능은 증가하지 않았으며 또한 큰 차이가 없었다. 그리고 혼합비율에 따른 보수성능은 주제의 증가에 따라 증가하지 않았으며 주제와 경화제의 비율이 5 1인 경우가 보수효과가 가장 크다는 것을 알 수 있었다. 그러므로 보수효과는 보수체의 압축강도보다는 혼합비율이 보수성능에 더 큰 영향을 미친다고 판단되며, 실제 현장에서 에폭시수지를 이용하여 균열을 보수할 경우 보수성능을 높이기 위해서는 수지재료의 특성에 따른 최적의 혼합비율을 채택하여야 하며, 또한 엄격한 계량에 의하여 혼합한 후 보수를 실시하는 것이 매우 중요하다고 판단된다.
최근 콘크리트 구조물의 균열보수에 가장 많이 사용되는 에폭시수지는 접착성과 화학성이 우수하여 효과적인 균열 보수재료로 인식되어 왔으며, 이에 대한 연구가 최근 진행되고 있지만 에폭시수지의 균열보수에 대한 엄격한 규준이 없는 현실이다. 따라서 본 연구에서는 콘크리트 구조물의 부재에 가장 많이 적용되는 압축강도인 150㎏/㎠, 250㎏/㎠, 350㎏/㎠ 의 콘크리트보에 가력장치를 이용하여 약 4, 5, 7 ton의 하중을 재하 함으로써 시험체에 0.2∼0.3㎜폭의 균열을 발생시킨 후, 국내에서 가장 많이 사용되고 있는 H사의 에폭시 수지를 선정하여 주제와 경화제의 혼합율을 3 1, 5 1, 7 1의 비율로 달리하여 균열을 저압저속주입공법으로 보수한 후, 파괴실험을 실시하여 균열에 대한 보수성능을 비교, 분석하였다. 본 연구 결과를 요약하면 압축강도의 증가에 따른 보수성능은 증가하지 않았으며 또한 큰 차이가 없었다. 그리고 혼합비율에 따른 보수성능은 주제의 증가에 따라 증가하지 않았으며 주제와 경화제의 비율이 5 1인 경우가 보수효과가 가장 크다는 것을 알 수 있었다. 그러므로 보수효과는 보수체의 압축강도보다는 혼합비율이 보수성능에 더 큰 영향을 미친다고 판단되며, 실제 현장에서 에폭시수지를 이용하여 균열을 보수할 경우 보수성능을 높이기 위해서는 수지재료의 특성에 따른 최적의 혼합비율을 채택하여야 하며, 또한 엄격한 계량에 의하여 혼합한 후 보수를 실시하는 것이 매우 중요하다고 판단된다.
Since epoxy resin which has been widely used to rehabilitate cracks of concrete structures has good adhesion and chemical property, it is considered as effective repairing material. There is no strict criterion for crack repair of epoxy resin although a lot of studies have been performed recently. I...
Since epoxy resin which has been widely used to rehabilitate cracks of concrete structures has good adhesion and chemical property, it is considered as effective repairing material. There is no strict criterion for crack repair of epoxy resin although a lot of studies have been performed recently. In this study concrete beams whose compressive strengths are 150㎏/㎠, 250㎏/㎠, 350㎏/㎠ are loaded about 4, 5, 7 ton and the crack of 0.2∼0.3mm width is made. Epoxy resin is chosen as the product of H company widely used in Korea. The mixture ratio of resin and hardener has three cases such as 3:1, 5:1 and 7:1. After crack is repaired using inject grouting, fracture test is performed and the rehabilitation efficiency for crack is analyzed. As compressive strength increases, rehabilitation efficiency does not increase. Also there is no big difference. Although the resin increases, rehabilitation efficiency for the mixture ratio does not increase. The mixture ratio of resin and hardener, 5:1, has the best rehabilitation efficiency. Therefore it is concluded that the mixture ratio rather than compressive strength has an effect on rehabilitation efficiency. If crack is repaired using epoxy resin in field, the optimum mixture ratio should be chosen to increase the rehabilitation efficiency. And the rehabilitation should be performed after being mixed by the accurate weighing.
Since epoxy resin which has been widely used to rehabilitate cracks of concrete structures has good adhesion and chemical property, it is considered as effective repairing material. There is no strict criterion for crack repair of epoxy resin although a lot of studies have been performed recently. In this study concrete beams whose compressive strengths are 150㎏/㎠, 250㎏/㎠, 350㎏/㎠ are loaded about 4, 5, 7 ton and the crack of 0.2∼0.3mm width is made. Epoxy resin is chosen as the product of H company widely used in Korea. The mixture ratio of resin and hardener has three cases such as 3:1, 5:1 and 7:1. After crack is repaired using inject grouting, fracture test is performed and the rehabilitation efficiency for crack is analyzed. As compressive strength increases, rehabilitation efficiency does not increase. Also there is no big difference. Although the resin increases, rehabilitation efficiency for the mixture ratio does not increase. The mixture ratio of resin and hardener, 5:1, has the best rehabilitation efficiency. Therefore it is concluded that the mixture ratio rather than compressive strength has an effect on rehabilitation efficiency. If crack is repaired using epoxy resin in field, the optimum mixture ratio should be chosen to increase the rehabilitation efficiency. And the rehabilitation should be performed after being mixed by the accurate weighing.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.