이 논문은 Al의 유동성을 향상시키기 위해 Si를 첨가한 Al-Si 합금에서 Si 첨가량과 Al-Si 함금에 0.02w.t%Sr를 첨가하여 개량처리 하였을 때 및 Al-Si 함금에 Cu 첨가량의 변화에 따른 유동성과 기계적 성질 변화에 대하여 고찰하였고 또한 Al-Si 합금의 주입온도 변화에 따른 유동성 변화에 대하여 고찰하였다.
Al-Si 합금에 있어서 Si첨가량에 의한 유동성의 변화는 Si첨가량이 증가할수록 아공정 조성의 범위에서는 유동성이 향상되어 공정 조성에서 최대를 보였으며 과공정 조성의 범위에서는 저하되었으며, 0.02w.t%Sr으로 6시간 동안 개량처리 한 Al-Si합금의 유동성 변화는 개량처리 전보다 향상되었으며 과공정조성인 Al-13%Si에서 최대를 나타냈다. 또한 공정조성의 Al-Si 합금에 Cu첨가량에 의한 유동성의 변화는 Cu첨가량이 증가할수록 저하되었고 Al-Si 합금에 있어서 주입온도에 의한 유동성의 변화는 주입온도가 높을수록 향상되었다. Al-Si 합금의 ...
이 논문은 Al의 유동성을 향상시키기 위해 Si를 첨가한 Al-Si 합금에서 Si 첨가량과 Al-Si 함금에 0.02w.t%Sr를 첨가하여 개량처리 하였을 때 및 Al-Si 함금에 Cu 첨가량의 변화에 따른 유동성과 기계적 성질 변화에 대하여 고찰하였고 또한 Al-Si 합금의 주입온도 변화에 따른 유동성 변화에 대하여 고찰하였다.
Al-Si 합금에 있어서 Si첨가량에 의한 유동성의 변화는 Si첨가량이 증가할수록 아공정 조성의 범위에서는 유동성이 향상되어 공정 조성에서 최대를 보였으며 과공정 조성의 범위에서는 저하되었으며, 0.02w.t%Sr으로 6시간 동안 개량처리 한 Al-Si합금의 유동성 변화는 개량처리 전보다 향상되었으며 과공정조성인 Al-13%Si에서 최대를 나타냈다. 또한 공정조성의 Al-Si 합금에 Cu첨가량에 의한 유동성의 변화는 Cu첨가량이 증가할수록 저하되었고 Al-Si 합금에 있어서 주입온도에 의한 유동성의 변화는 주입온도가 높을수록 향상되었다. Al-Si 합금의 인장강도는 Si첨가량의 증가에 따라 아공정 조성의 범위에서는 증가되어 공정조성에서 최대 인장강도를 가졌고 과공정 조성의 범위에서는 저하되었으며 연신율은 Si를 첨가하였을 경우 급격히 저하되었다
0.02w.t%Sr으로 개량처리 하였을 때에는 인장강도, 연신율 모두 개량처리 전보다 증가되었으며, Cu를 첨가했을 때 인장강도는 증가되었다. Al-Si 합금의 정도는 Si첨가량이 증가할수록, AI-Si 합금에 Cu를 첨가했을 때 Cu첨가량이 증가할수록 증가되었다.
이 논문은 Al의 유동성을 향상시키기 위해 Si를 첨가한 Al-Si 합금에서 Si 첨가량과 Al-Si 함금에 0.02w.t%Sr를 첨가하여 개량처리 하였을 때 및 Al-Si 함금에 Cu 첨가량의 변화에 따른 유동성과 기계적 성질 변화에 대하여 고찰하였고 또한 Al-Si 합금의 주입온도 변화에 따른 유동성 변화에 대하여 고찰하였다.
Al-Si 합금에 있어서 Si첨가량에 의한 유동성의 변화는 Si첨가량이 증가할수록 아공정 조성의 범위에서는 유동성이 향상되어 공정 조성에서 최대를 보였으며 과공정 조성의 범위에서는 저하되었으며, 0.02w.t%Sr으로 6시간 동안 개량처리 한 Al-Si합금의 유동성 변화는 개량처리 전보다 향상되었으며 과공정조성인 Al-13%Si에서 최대를 나타냈다. 또한 공정조성의 Al-Si 합금에 Cu첨가량에 의한 유동성의 변화는 Cu첨가량이 증가할수록 저하되었고 Al-Si 합금에 있어서 주입온도에 의한 유동성의 변화는 주입온도가 높을수록 향상되었다. Al-Si 합금의 인장강도는 Si첨가량의 증가에 따라 아공정 조성의 범위에서는 증가되어 공정조성에서 최대 인장강도를 가졌고 과공정 조성의 범위에서는 저하되었으며 연신율은 Si를 첨가하였을 경우 급격히 저하되었다
0.02w.t%Sr으로 개량처리 하였을 때에는 인장강도, 연신율 모두 개량처리 전보다 증가되었으며, Cu를 첨가했을 때 인장강도는 증가되었다. Al-Si 합금의 정도는 Si첨가량이 증가할수록, AI-Si 합금에 Cu를 첨가했을 때 Cu첨가량이 증가할수록 증가되었다.
To improve the fluidity of Al, this thesis studied the fluidity and the changes of mechanical properties, depending on the changes resulted from the amount of Cu which was added to Al-Si alloy, and the changes in modifying Al-Si alloy which 0.22w.t%Sr was added to after adding Si to Al-Si alloy. And...
To improve the fluidity of Al, this thesis studied the fluidity and the changes of mechanical properties, depending on the changes resulted from the amount of Cu which was added to Al-Si alloy, and the changes in modifying Al-Si alloy which 0.22w.t%Sr was added to after adding Si to Al-Si alloy. And the thesis also studied the changes of the fluidity caused by pouring temperature of Al-Si alloy.
As the amount of Si increased, the fluidity caused by the degrees which Si was added to got improved at the range of hypo-eutectic content. The fluidity turned out to be the highest at the range of eutectic content, while it was found to be lowered at the range of the hyper-eutectic content. After Al-Si was modified by 0.02w.t%Sr for six hours, the changes of the fluidity was improved more than before it was modified. They turned out to be the highest in Al-13%Si, which is hyper-eutectic content. As the amount of Cu increased, the changes of the fluidity caused by adding Cu to Al-Si alloy to be done eutectic content were reduced. In alloying Al-Si the changes of the fluidity resulted from pouring temperature increased in proportion to the level of temperature.
Tensile strength of Al-Si alloy increased in proportion to the amount of added Si at the range of hypo-eutectic content. It was the highest in eutectic content, but it was lowered at the range of hyper-eutectic content. The elongation decreased rapidly in the case of adding Si. When Al-Si alloy was modified by 0.02w.t%Sr, both tensile strength and elongation increased more than before the modification. Tensile strength was improved in adding Cu. Hardness of Al-Si alloy increased in proportion to the amount of added Si and Cu when Cu was added to Al-Si alloy.
To improve the fluidity of Al, this thesis studied the fluidity and the changes of mechanical properties, depending on the changes resulted from the amount of Cu which was added to Al-Si alloy, and the changes in modifying Al-Si alloy which 0.22w.t%Sr was added to after adding Si to Al-Si alloy. And the thesis also studied the changes of the fluidity caused by pouring temperature of Al-Si alloy.
As the amount of Si increased, the fluidity caused by the degrees which Si was added to got improved at the range of hypo-eutectic content. The fluidity turned out to be the highest at the range of eutectic content, while it was found to be lowered at the range of the hyper-eutectic content. After Al-Si was modified by 0.02w.t%Sr for six hours, the changes of the fluidity was improved more than before it was modified. They turned out to be the highest in Al-13%Si, which is hyper-eutectic content. As the amount of Cu increased, the changes of the fluidity caused by adding Cu to Al-Si alloy to be done eutectic content were reduced. In alloying Al-Si the changes of the fluidity resulted from pouring temperature increased in proportion to the level of temperature.
Tensile strength of Al-Si alloy increased in proportion to the amount of added Si at the range of hypo-eutectic content. It was the highest in eutectic content, but it was lowered at the range of hyper-eutectic content. The elongation decreased rapidly in the case of adding Si. When Al-Si alloy was modified by 0.02w.t%Sr, both tensile strength and elongation increased more than before the modification. Tensile strength was improved in adding Cu. Hardness of Al-Si alloy increased in proportion to the amount of added Si and Cu when Cu was added to Al-Si alloy.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.