연료가 고온벽면에 충돌할 때, 분사시 연소기를 냉각시킨다. 그 후에 충돌된 연료는 미립화가 촉진되고 난 후, 기화된다. PTC 히터를 사용함으로써, 고온벽면(180℃)를 형성할 수 있다. 가솔린은 정해진 양만큼 분사되어 벽면에 충돌된다. 벽면이 가열되었을 때와, 가열되지 않았을 때, 벽면 충돌 과정을 35㎜ 카메라로 촬영하였다. 각각 그 기화량을 측정하였다....
연료가 고온벽면에 충돌할 때, 분사시 연소기를 냉각시킨다. 그 후에 충돌된 연료는 미립화가 촉진되고 난 후, 기화된다. PTC 히터를 사용함으로써, 고온벽면(180℃)를 형성할 수 있다. 가솔린은 정해진 양만큼 분사되어 벽면에 충돌된다. 벽면이 가열되었을 때와, 가열되지 않았을 때, 벽면 충돌 과정을 35㎜ 카메라로 촬영하였다. 각각 그 기화량을 측정하였다.
본 연구에서, 가열된 벽면에 충돌했을 때와 가열되지 않은 벽면에 충돌했을 때, 각각의 기화율을 측정하였다. 고온벽면에 충돌했을 때의 기화율이 단순충돌의 경우보다 훨씬 더 많은 기화율을 보였다.
연료가 고온벽면에 충돌할 때, 분사시 연소기를 냉각시킨다. 그 후에 충돌된 연료는 미립화가 촉진되고 난 후, 기화된다. PTC 히터를 사용함으로써, 고온벽면(180℃)를 형성할 수 있다. 가솔린은 정해진 양만큼 분사되어 벽면에 충돌된다. 벽면이 가열되었을 때와, 가열되지 않았을 때, 벽면 충돌 과정을 35㎜ 카메라로 촬영하였다. 각각 그 기화량을 측정하였다.
본 연구에서, 가열된 벽면에 충돌했을 때와 가열되지 않은 벽면에 충돌했을 때, 각각의 기화율을 측정하였다. 고온벽면에 충돌했을 때의 기화율이 단순충돌의 경우보다 훨씬 더 많은 기화율을 보였다.
When some amount of liquid makes impact against the hot wall surface, in spray cooling and evaporating type combustor(1), and after impacting liquid changes into fine particles and then disperses or evaporates. By using PTC heater, it makes high temperature(180℃) wall surface. Gasoline is injected o...
When some amount of liquid makes impact against the hot wall surface, in spray cooling and evaporating type combustor(1), and after impacting liquid changes into fine particles and then disperses or evaporates. By using PTC heater, it makes high temperature(180℃) wall surface. Gasoline is injected on this wall surface provided characteristics of injected flow rate are measured. Also, the processes of impacting against wall surface are taken by 35㎜ camera. As gasoline is impacted on heated wall surface and unheated wall surface. The amount of vaporization are obtained each.
In this study, both evaporation rate of heated wall surface and that of unheated wall surface are measured. The evaporation rate impacted against high temperature is far superior to that which is depending on only impacting.
When some amount of liquid makes impact against the hot wall surface, in spray cooling and evaporating type combustor(1), and after impacting liquid changes into fine particles and then disperses or evaporates. By using PTC heater, it makes high temperature(180℃) wall surface. Gasoline is injected on this wall surface provided characteristics of injected flow rate are measured. Also, the processes of impacting against wall surface are taken by 35㎜ camera. As gasoline is impacted on heated wall surface and unheated wall surface. The amount of vaporization are obtained each.
In this study, both evaporation rate of heated wall surface and that of unheated wall surface are measured. The evaporation rate impacted against high temperature is far superior to that which is depending on only impacting.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.