부산지역 모공단내 도금업 산업장의 작업환경 유해요인 노출수준을 파악하기 위하여 21개 사업장 28개 공정을 대상으로 작업시 발생되는 소음, 분진(2종), 중금속(4종), 유기용제(17종), 특정화학물질(4종)의 농도를 2000년 1월에서 2001년 12월까지 측정, 분석, 평가한 결과는 다음과 같다. 1. 소음의 경우 평균소음수준이 노출기준을 초과한 공정은 없으나, 가공공정에서 6개 측정점, 전처리연마공정에서 5개 측정점, 후처리연마공정에서 4개 측정점, 탈수공정에서 6개 측정점이 노출기준을 초과하였다. 2. 분진의 평균농도는 모두 노출기준에 미달되는 수준이었다. 3. 중금속은 ...
부산지역 모공단내 도금업 산업장의 작업환경 유해요인 노출수준을 파악하기 위하여 21개 사업장 28개 공정을 대상으로 작업시 발생되는 소음, 분진(2종), 중금속(4종), 유기용제(17종), 특정화학물질(4종)의 농도를 2000년 1월에서 2001년 12월까지 측정, 분석, 평가한 결과는 다음과 같다. 1. 소음의 경우 평균소음수준이 노출기준을 초과한 공정은 없으나, 가공공정에서 6개 측정점, 전처리연마공정에서 5개 측정점, 후처리연마공정에서 4개 측정점, 탈수공정에서 6개 측정점이 노출기준을 초과하였다. 2. 분진의 평균농도는 모두 노출기준에 미달되는 수준이었다. 3. 중금속은 아연, 망간, 납의 경우 노출기준을 초과하는 작업공정이 없었으나, 크롬은 크롬도금공정에서 1개의 측정점이 노출기준을 초과하였다. 4. 유기용제는 수정/세척공정, 코팅/현상공정에서 각각 1개 측정점에서 톨루엔이 노출 기준을 초과하였고, 그 외에는 노출기준에 현저히 미달하는 수준이었다. 5. 특정화학물질의 경우 노출기준에 현저히 미달하는 수준이었다. 6. 상·하반기 유해인자 노출수준은 분진과 중금속 중 아연, 망간, 납의 경우 점점 노출수준이 낮아지고 있으며, 반면 크롬, 소음, 특정화학물질 경우 반기별로 큰 차이가 없는 것으로 나타났다. 유기용제의 경우 2001년 하반기에 노출수준이 조금 증가한 것으로 나타났다. 7. 근로자수별 노출수준은 소음의 경우 20인 이하보다 21인 이상에서 높게 나타났으며, 분진의 경우 큰 차이가 없었다. 중금속 경우 아연과 망간은 근로자수가 많을수록 노출수준이 낮아지고, 크롬의 경우 51인 이상에서 증가하는 것으로 나타났다. 유기용제의 경우 근로자수가 많을수록 노출수준이 낮아지는 것으로 나타났다. 이상의 결과에서 볼 수 있듯이 노출기준을 초과하는 작업공정에 대해서는 보다 적극적이고 능동적인 작업환경관리가 이루어져야 하며, 도출기준을 미만의 경시적인 변화가 없는 작업공정에 대해서는 지속적인 관리를 통해서 노출수준 이하로 유지되도록 관리하여야 할 것이다.
부산지역 모공단내 도금업 산업장의 작업환경 유해요인 노출수준을 파악하기 위하여 21개 사업장 28개 공정을 대상으로 작업시 발생되는 소음, 분진(2종), 중금속(4종), 유기용제(17종), 특정화학물질(4종)의 농도를 2000년 1월에서 2001년 12월까지 측정, 분석, 평가한 결과는 다음과 같다. 1. 소음의 경우 평균소음수준이 노출기준을 초과한 공정은 없으나, 가공공정에서 6개 측정점, 전처리연마공정에서 5개 측정점, 후처리연마공정에서 4개 측정점, 탈수공정에서 6개 측정점이 노출기준을 초과하였다. 2. 분진의 평균농도는 모두 노출기준에 미달되는 수준이었다. 3. 중금속은 아연, 망간, 납의 경우 노출기준을 초과하는 작업공정이 없었으나, 크롬은 크롬도금공정에서 1개의 측정점이 노출기준을 초과하였다. 4. 유기용제는 수정/세척공정, 코팅/현상공정에서 각각 1개 측정점에서 톨루엔이 노출 기준을 초과하였고, 그 외에는 노출기준에 현저히 미달하는 수준이었다. 5. 특정화학물질의 경우 노출기준에 현저히 미달하는 수준이었다. 6. 상·하반기 유해인자 노출수준은 분진과 중금속 중 아연, 망간, 납의 경우 점점 노출수준이 낮아지고 있으며, 반면 크롬, 소음, 특정화학물질 경우 반기별로 큰 차이가 없는 것으로 나타났다. 유기용제의 경우 2001년 하반기에 노출수준이 조금 증가한 것으로 나타났다. 7. 근로자수별 노출수준은 소음의 경우 20인 이하보다 21인 이상에서 높게 나타났으며, 분진의 경우 큰 차이가 없었다. 중금속 경우 아연과 망간은 근로자수가 많을수록 노출수준이 낮아지고, 크롬의 경우 51인 이상에서 증가하는 것으로 나타났다. 유기용제의 경우 근로자수가 많을수록 노출수준이 낮아지는 것으로 나타났다. 이상의 결과에서 볼 수 있듯이 노출기준을 초과하는 작업공정에 대해서는 보다 적극적이고 능동적인 작업환경관리가 이루어져야 하며, 도출기준을 미만의 경시적인 변화가 없는 작업공정에 대해서는 지속적인 관리를 통해서 노출수준 이하로 유지되도록 관리하여야 할 것이다.
For the purpose of preparing the fundamental data and assessing the status of exposure level of chemical substances and physical agents such as noise, two types of dust, four types of metals, seventeen types of organic solvents, and four types of other materials classified by specific chemical subst...
For the purpose of preparing the fundamental data and assessing the status of exposure level of chemical substances and physical agents such as noise, two types of dust, four types of metals, seventeen types of organic solvents, and four types of other materials classified by specific chemical substances in 21 metal product plating factories classified by 28 processes, The author determined exposure level on those hazardous materials rom Jan. to Dec, 2001. The results were as follows; 1. The exposure level for noise was exceeded to Threshold Limit Value (TLV) in the process of 6 cases of Machining, 5 and 4 cases of pre and post-huffing, and 6 cases of waterdrop-removing, the mean noise level of all of processes was not exceeded to compliance level. 2. The exposure level for dust was not exceeded to TLV at all. 3. The exposure level for Chromium(Cr) was exceeded to TLV in Chromium plating process, metal exposure level including Zinc(Zn), Manganese(Mn), and Lead(Pb) was not exceeded to TLV. 4. The exposure level of toluene in case of organic so]vents was exceeded to TLV in 1 case of finishing/cleaning, coating/developing process, respectively. 5. The exposure level of four types of other materials classified by specific chemical substances were not exceeded to TLV. 6. The exposure level for dust and metal including Zn, Mn, and Pb was decreased in comparison with two results of air monitoring performed, There was no difference of the exposure level for Cr, noise, and four types of other materials classified by specific chemical substances, and the exposure level for organic solvents was slightly increased. 7. The exposure level for noise in factories employing more than 21 workers was higher than that for noise in foadtories employing less than 20 workers, The more workers, the lower exposure level in metal including Zn, Mn. The exposure level for Cr was increasing in factories employing more than 51 workers. and the more workers the lower exposure level in organic solvents. According to above results, This study suggests positive work environment managements in processes exceeding exposure limit value as well as continuously consecutive work environment management in processes not exceeding exposure limit value and revealing no chronological difference of exposure level should be needed.
For the purpose of preparing the fundamental data and assessing the status of exposure level of chemical substances and physical agents such as noise, two types of dust, four types of metals, seventeen types of organic solvents, and four types of other materials classified by specific chemical substances in 21 metal product plating factories classified by 28 processes, The author determined exposure level on those hazardous materials rom Jan. to Dec, 2001. The results were as follows; 1. The exposure level for noise was exceeded to Threshold Limit Value (TLV) in the process of 6 cases of Machining, 5 and 4 cases of pre and post-huffing, and 6 cases of waterdrop-removing, the mean noise level of all of processes was not exceeded to compliance level. 2. The exposure level for dust was not exceeded to TLV at all. 3. The exposure level for Chromium(Cr) was exceeded to TLV in Chromium plating process, metal exposure level including Zinc(Zn), Manganese(Mn), and Lead(Pb) was not exceeded to TLV. 4. The exposure level of toluene in case of organic so]vents was exceeded to TLV in 1 case of finishing/cleaning, coating/developing process, respectively. 5. The exposure level of four types of other materials classified by specific chemical substances were not exceeded to TLV. 6. The exposure level for dust and metal including Zn, Mn, and Pb was decreased in comparison with two results of air monitoring performed, There was no difference of the exposure level for Cr, noise, and four types of other materials classified by specific chemical substances, and the exposure level for organic solvents was slightly increased. 7. The exposure level for noise in factories employing more than 21 workers was higher than that for noise in foadtories employing less than 20 workers, The more workers, the lower exposure level in metal including Zn, Mn. The exposure level for Cr was increasing in factories employing more than 51 workers. and the more workers the lower exposure level in organic solvents. According to above results, This study suggests positive work environment managements in processes exceeding exposure limit value as well as continuously consecutive work environment management in processes not exceeding exposure limit value and revealing no chronological difference of exposure level should be needed.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.