본 연구에서는 부기고분자응집제인 폴리염화알루미늄(PAC, Poly-aluminum chloride)을 제조하고 이 응집제를 이용한 중금속 및 불소이 응집제거 특성에 대하여 연구하였다. 폴리염화알루미늄을 제조하기 위한 전단계의 전구물질인 황산 알루미늄 용액은 한국JCC(주)에서 알루미늄 에칭 공정시 발생하는 폐산을 중화 침전시키고 황산을 첨가하여 합성하였다. 그리고 폴리염화알루미늄은 황산알루미늄용액에 ...
본 연구에서는 부기고분자응집제인 폴리염화알루미늄(PAC, Poly-aluminum chloride)을 제조하고 이 응집제를 이용한 중금속 및 불소이 응집제거 특성에 대하여 연구하였다. 폴리염화알루미늄을 제조하기 위한 전단계의 전구물질인 황산 알루미늄 용액은 한국JCC(주)에서 알루미늄 에칭 공정시 발생하는 폐산을 중화 침전시키고 황산을 첨가하여 합성하였다. 그리고 폴리염화알루미늄은 황산알루미늄용액에 염화칼슘과 탄산칼슘을 첨가하여 제조하였다. 제조한 폴리염화알루미늄은 FT-IR 및 XRD로 분석하였고, DS M 1510에 의한 산화알루미늄 함량(%) 및 염기도(%)를 분석하여 폴리염화알루미늄임을 확인하였다. 중금속 및 불소의 응집제거 실험은 제조한 폴리염화알루미늄을 응집제로 하여 jAR test에 의해 수행하영ㅆ으며, 실험 결과 알칼리도 증가에따라 중금속의 제거효율이 증가함을 나타냈다. pH 8에서 철, 망간, 카드뮴 그리고 납의 제거효율은 모두 알칼리도 1000mg/l(as caCO_3), PAC 주입량 증가에 따라 제거효율이 증가하였는데, pH 8, 알칼리도 100mg/l 그리고 PAC 주입량500mg/l에서 가장 높은 제거효율이 나타났다.
본 연구에서는 부기고분자응집제인 폴리염화알루미늄(PAC, Poly-aluminum chloride)을 제조하고 이 응집제를 이용한 중금속 및 불소이 응집제거 특성에 대하여 연구하였다. 폴리염화알루미늄을 제조하기 위한 전단계의 전구물질인 황산 알루미늄 용액은 한국JCC(주)에서 알루미늄 에칭 공정시 발생하는 폐산을 중화 침전시키고 황산을 첨가하여 합성하였다. 그리고 폴리염화알루미늄은 황산알루미늄용액에 염화칼슘과 탄산칼슘을 첨가하여 제조하였다. 제조한 폴리염화알루미늄은 FT-IR 및 XRD로 분석하였고, DS M 1510에 의한 산화알루미늄 함량(%) 및 염기도(%)를 분석하여 폴리염화알루미늄임을 확인하였다. 중금속 및 불소의 응집제거 실험은 제조한 폴리염화알루미늄을 응집제로 하여 jAR test에 의해 수행하영ㅆ으며, 실험 결과 알칼리도 증가에따라 중금속의 제거효율이 증가함을 나타냈다. pH 8에서 철, 망간, 카드뮴 그리고 납의 제거효율은 모두 알칼리도 1000mg/l(as caCO_3), PAC 주입량 증가에 따라 제거효율이 증가하였는데, pH 8, 알칼리도 100mg/l 그리고 PAC 주입량500mg/l에서 가장 높은 제거효율이 나타났다.
This study was to remove the heavy metals and fluorides using PAC, which is one of the inorganic polymeric coagulants. To prepare the PAC, the Al_2(SO_4)_3 solution was made by neutralizing precipitating and adding H_2SO_4 in the solution that is a waste acid of the etching process at Korea_JCC Co. ...
This study was to remove the heavy metals and fluorides using PAC, which is one of the inorganic polymeric coagulants. To prepare the PAC, the Al_2(SO_4)_3 solution was made by neutralizing precipitating and adding H_2SO_4 in the solution that is a waste acid of the etching process at Korea_JCC Co. LTD. Adding CaCl_2 and CaCO-3 to the AL_2(SO_4)_3 solution the AL_2(SO_4)_3 solution was converted to the PAC. PAC was analyzed by FT-IR, XRD, and KS M 1510 of the AL_2O_3(%) and basicity(%). A conclusion of the removal efficiency of heavy metals and fluorides using PAC to the Jar-test was below. Removal efficiency of heavy metals was increased with increasing alkalinity. The experimental results showed that the highest removal efficiency of Fe, Mn, Ck, and Pb was 95.0%, 62.7%, 98.6%, and 76.6% respectively, at alkalinity 1000mg/L(as CaCO_3) and PAC dosage 200mg/L(as PAC). In the case of fluoride, following PAC dosage increased the fluoride removal efficiency.
This study was to remove the heavy metals and fluorides using PAC, which is one of the inorganic polymeric coagulants. To prepare the PAC, the Al_2(SO_4)_3 solution was made by neutralizing precipitating and adding H_2SO_4 in the solution that is a waste acid of the etching process at Korea_JCC Co. LTD. Adding CaCl_2 and CaCO-3 to the AL_2(SO_4)_3 solution the AL_2(SO_4)_3 solution was converted to the PAC. PAC was analyzed by FT-IR, XRD, and KS M 1510 of the AL_2O_3(%) and basicity(%). A conclusion of the removal efficiency of heavy metals and fluorides using PAC to the Jar-test was below. Removal efficiency of heavy metals was increased with increasing alkalinity. The experimental results showed that the highest removal efficiency of Fe, Mn, Ck, and Pb was 95.0%, 62.7%, 98.6%, and 76.6% respectively, at alkalinity 1000mg/L(as CaCO_3) and PAC dosage 200mg/L(as PAC). In the case of fluoride, following PAC dosage increased the fluoride removal efficiency.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.