BaTiO₃(BT) 세라믹 유전 물질을 포함한 유무기 복합 유전체를 제조하였다. 입자 사이즈가 BT-01(100nm), BT-03(300nm), BT-05(500nm)인 BaTiO₃를 각각 수계와 비수계 용매에 분산제 첨가량에 따라 분산시켜 유동학적 특성 변화와 유전특성변화를 고찰하였다. 최적 조건으로 분산된 수계 BT 분산액을 상용 ...
BaTiO₃(BT) 세라믹 유전 물질을 포함한 유무기 복합 유전체를 제조하였다. 입자 사이즈가 BT-01(100nm), BT-03(300nm), BT-05(500nm)인 BaTiO₃를 각각 수계와 비수계 용매에 분산제 첨가량에 따라 분산시켜 유동학적 특성 변화와 유전특성변화를 고찰하였다. 최적 조건으로 분산된 수계 BT 분산액을 상용 PTFE (Polytetrafluoroethylene) 분산액과 vol%로 혼합하여, 또한 비수계 BT 분산액을 LCP(liquid crystal polymer)와 vol%로 혼합하여 유무기 유전 복합체를 제조하고, 전기적, 열적 특성 변화를 고찰하였다. PTFE-BT 유전 복합체에서 BT 분산액과 상용 PTFE 분산액과의 정전기적 안정성을 위하여 BT 분산시 용매인 물의 pH는 PTFE와 같은 pH 10 에 맞췄다. BT 분산액내 BT함량은 15 vol%로 고정시키고, BT-05에서는 PAA첨가량이 2vol%일때, BT-03와 BT-01의 경우에는 각각 PAA의 첨가량이 3vol% 4vol%일 때, 가장 낮은 점도를 나타내었다. 또 입도의 경우에서도 PAA 첨가량이 BT-05일 때 2vol%, BT-03일때 3vol%, 그리고 BT-01일때 4vol%에서 가장 낮은 입도를 나타내었다. 최적조건의 PAA첨가량에서, 분산 안정성을 이루었다. LCP-BT 유전복합체에서는 BT 분산액내 BT함량을 10vol%로 고정시켰고, 분산제(GLYMO)의 첨가에 따라 BT-01일때 5vol%, BT-03일때 4vol% 그리고 BT-05일때 3vol%의 GLYMO 첨가시 최적 분산 조건을 알아내었다. 최종 유무기 복합체의 유전율은 BT 입자 크기별로 전체 부피에 대한 BT의 함량이 10∼70vol%일 때 측정하였으며, 같은 BT vol%일때, BT 입자 크기에 따라tetragonality의 증가로 BT-01∼BT-05로 입자크기가 커질 수 록 상대적으로 높은 유전율을 나타내고 있었다. 유전손실 또한 유전율과 같은 경향을 나타내었다.
BaTiO₃(BT) 세라믹 유전 물질을 포함한 유무기 복합 유전체를 제조하였다. 입자 사이즈가 BT-01(100nm), BT-03(300nm), BT-05(500nm)인 BaTiO₃를 각각 수계와 비수계 용매에 분산제 첨가량에 따라 분산시켜 유동학적 특성 변화와 유전특성변화를 고찰하였다. 최적 조건으로 분산된 수계 BT 분산액을 상용 PTFE (Polytetrafluoroethylene) 분산액과 vol%로 혼합하여, 또한 비수계 BT 분산액을 LCP(liquid crystal polymer)와 vol%로 혼합하여 유무기 유전 복합체를 제조하고, 전기적, 열적 특성 변화를 고찰하였다. PTFE-BT 유전 복합체에서 BT 분산액과 상용 PTFE 분산액과의 정전기적 안정성을 위하여 BT 분산시 용매인 물의 pH는 PTFE와 같은 pH 10 에 맞췄다. BT 분산액내 BT함량은 15 vol%로 고정시키고, BT-05에서는 PAA첨가량이 2vol%일때, BT-03와 BT-01의 경우에는 각각 PAA의 첨가량이 3vol% 4vol%일 때, 가장 낮은 점도를 나타내었다. 또 입도의 경우에서도 PAA 첨가량이 BT-05일 때 2vol%, BT-03일때 3vol%, 그리고 BT-01일때 4vol%에서 가장 낮은 입도를 나타내었다. 최적조건의 PAA첨가량에서, 분산 안정성을 이루었다. LCP-BT 유전복합체에서는 BT 분산액내 BT함량을 10vol%로 고정시켰고, 분산제(GLYMO)의 첨가에 따라 BT-01일때 5vol%, BT-03일때 4vol% 그리고 BT-05일때 3vol%의 GLYMO 첨가시 최적 분산 조건을 알아내었다. 최종 유무기 복합체의 유전율은 BT 입자 크기별로 전체 부피에 대한 BT의 함량이 10∼70vol%일 때 측정하였으며, 같은 BT vol%일때, BT 입자 크기에 따라tetragonality의 증가로 BT-01∼BT-05로 입자크기가 커질 수 록 상대적으로 높은 유전율을 나타내고 있었다. 유전손실 또한 유전율과 같은 경향을 나타내었다.
The polymer-BaTiO₃dielectric composites were prepared using PTFE (Polytetrafluoroethylene) and LCP (Liquid Crystal Polymer) as polymers. The dielectric and thermal properties of polymer-BaTiO₃composites were investigated by varing the amount of dispersant and particle sizes of BaTiO3 (BT) with 100 n...
The polymer-BaTiO₃dielectric composites were prepared using PTFE (Polytetrafluoroethylene) and LCP (Liquid Crystal Polymer) as polymers. The dielectric and thermal properties of polymer-BaTiO₃composites were investigated by varing the amount of dispersant and particle sizes of BaTiO3 (BT) with 100 nm (BT-01), 300 nm (BT-03), and 500 nm (BT-05) aqueous and non aqueous media, respectively. For the preparation condition of PTFE-BT dielectrics composites, the pH of water as a solvent and the amount of BT in BT suspension was fixed at pH 10 and 15 vol.% in order to get electrostatic stabilization. BT suspension containing BT-05, BT-03, and BT-01 with the corresponding amount of PAA (polyacrylic acid) 2, 3 and 4 vol.% as a dispersant showed the minimum viscosity and particle size. Also, the dielectric constants and losses of PTFE-BT dielectric composites increased with increasing the particle size of BT. For the preparation condition of LCP-BT dielectrics composites, the amount of BT in BT suspension was fixed at 10 vol.%. The optimum condition of BT suspension was BT-05, BT03, and BT-01 with the corresponding amount of GLYMO (3-Glycidyloxypropyltrimethoxysilane) 3, 4 and 5 vol.% as a dispersant. Also, the dielectric constants and losses of LCP-BT dielectric composites increased with increasing the particle size of BT.
The polymer-BaTiO₃dielectric composites were prepared using PTFE (Polytetrafluoroethylene) and LCP (Liquid Crystal Polymer) as polymers. The dielectric and thermal properties of polymer-BaTiO₃composites were investigated by varing the amount of dispersant and particle sizes of BaTiO3 (BT) with 100 nm (BT-01), 300 nm (BT-03), and 500 nm (BT-05) aqueous and non aqueous media, respectively. For the preparation condition of PTFE-BT dielectrics composites, the pH of water as a solvent and the amount of BT in BT suspension was fixed at pH 10 and 15 vol.% in order to get electrostatic stabilization. BT suspension containing BT-05, BT-03, and BT-01 with the corresponding amount of PAA (polyacrylic acid) 2, 3 and 4 vol.% as a dispersant showed the minimum viscosity and particle size. Also, the dielectric constants and losses of PTFE-BT dielectric composites increased with increasing the particle size of BT. For the preparation condition of LCP-BT dielectrics composites, the amount of BT in BT suspension was fixed at 10 vol.%. The optimum condition of BT suspension was BT-05, BT03, and BT-01 with the corresponding amount of GLYMO (3-Glycidyloxypropyltrimethoxysilane) 3, 4 and 5 vol.% as a dispersant. Also, the dielectric constants and losses of LCP-BT dielectric composites increased with increasing the particle size of BT.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.