Calcium Sulfo Aluminate(C_(4)A_(3)S^( ̄)-CSA라 함)는 급경성, 조강성, 팽창성 등의 특성이 있어 초속경 시멘트, 팽창 시멘트 등 필요한 목적에 따라 다양한 용도로 사용될 수 있다. 일반적으로 CSA클링커는 bauxite, 석회, 무수석고 혼합물을 약 1300℃이상에서 소성하여 제조한다. 그러나 국내에는 bauxite의 매장이 전혀 없어 CSA 클링커를 수입에 의존하여 사용하고 있다. 따라서 국내에 충분한 양이 매장되어 있으나 활용되지 않는 ...
Calcium Sulfo Aluminate(C_(4)A_(3)S^( ̄)-CSA라 함)는 급경성, 조강성, 팽창성 등의 특성이 있어 초속경 시멘트, 팽창 시멘트 등 필요한 목적에 따라 다양한 용도로 사용될 수 있다. 일반적으로 CSA클링커는 bauxite, 석회, 무수석고 혼합물을 약 1300℃이상에서 소성하여 제조한다. 그러나 국내에는 bauxite의 매장이 전혀 없어 CSA 클링커를 수입에 의존하여 사용하고 있다. 따라서 국내에 충분한 양이 매장되어 있으나 활용되지 않는 명반석[Alunite-K-(2)SO_(4)·Al_(2)(SO_(4))_(3)·4Al(OH)_(3)]을 사용하여 CSA 클링커 화합물을 제조하였다. 제조한 명반석계 CSA의 특성은 일반적인 bauxite계 CSA와 다른 수화 특성을 나타낸다. 이는 명반석 중에 함유되어 있는 K_(2)SO_(4)의 존재에 의한 것으로서, K_(2)SO_(4)는 소성과정에서 CaSO_(4)와 반응하여 langbenite(2CaSO_(4)·K_(2)SO_(4))를 형성하게 된다. 본 연구에서는 이 langbenite의 특성 및 CSA 수화에 미치는 영향을 검토하기 위하여 명반석계 CSA, bauxite계 CSA, langbenite로 일부를 치환한 bauxite계 CSA에 대하여 응결시간, 수화온도, 유동성, 압축강도 등의 물성을 측정하였고, XRD 및 SEM으로 수화생성물의 상변화를 확인하였다. 그 결과 langbenite는 명반석계 CSA의 입자 표면에 침상의 결정으로 존재하고 있으며, langbenite를 bauxite계 CSA에 치환하여 첨가한 경우 치환양이 증가할수록 치환하지 않은 경우보다 초기응결이 빨라지며 flow를 저하시키고 장기재령에서 압축강도가 감소하였다. 또한 길이변화율에서 재령이 경과할수록 팽창률 증가는 완만하고, 치환양이 증가할수록 팽창률은 커진다. 또, langbenite는 CSA계 재료에서 Ca(OH)_(2)의 용출을 지연시킴으로 인하여 ettringite 생성을 지연시키고, K_(2)SO_(4)에 의해 속경성이 부여되는 것을 알 수 있었다.
Calcium Sulfo Aluminate(C_(4)A_(3)S^( ̄)-CSA라 함)는 급경성, 조강성, 팽창성 등의 특성이 있어 초속경 시멘트, 팽창 시멘트 등 필요한 목적에 따라 다양한 용도로 사용될 수 있다. 일반적으로 CSA 클링커는 bauxite, 석회, 무수석고 혼합물을 약 1300℃이상에서 소성하여 제조한다. 그러나 국내에는 bauxite의 매장이 전혀 없어 CSA 클링커를 수입에 의존하여 사용하고 있다. 따라서 국내에 충분한 양이 매장되어 있으나 활용되지 않는 명반석[Alunite-K-(2)SO_(4)·Al_(2)(SO_(4))_(3)·4Al(OH)_(3)]을 사용하여 CSA 클링커 화합물을 제조하였다. 제조한 명반석계 CSA의 특성은 일반적인 bauxite계 CSA와 다른 수화 특성을 나타낸다. 이는 명반석 중에 함유되어 있는 K_(2)SO_(4)의 존재에 의한 것으로서, K_(2)SO_(4)는 소성과정에서 CaSO_(4)와 반응하여 langbenite(2CaSO_(4)·K_(2)SO_(4))를 형성하게 된다. 본 연구에서는 이 langbenite의 특성 및 CSA 수화에 미치는 영향을 검토하기 위하여 명반석계 CSA, bauxite계 CSA, langbenite로 일부를 치환한 bauxite계 CSA에 대하여 응결시간, 수화온도, 유동성, 압축강도 등의 물성을 측정하였고, XRD 및 SEM으로 수화생성물의 상변화를 확인하였다. 그 결과 langbenite는 명반석계 CSA의 입자 표면에 침상의 결정으로 존재하고 있으며, langbenite를 bauxite계 CSA에 치환하여 첨가한 경우 치환양이 증가할수록 치환하지 않은 경우보다 초기응결이 빨라지며 flow를 저하시키고 장기재령에서 압축강도가 감소하였다. 또한 길이변화율에서 재령이 경과할수록 팽창률 증가는 완만하고, 치환양이 증가할수록 팽창률은 커진다. 또, langbenite는 CSA계 재료에서 Ca(OH)_(2)의 용출을 지연시킴으로 인하여 ettringite 생성을 지연시키고, K_(2)SO_(4)에 의해 속경성이 부여되는 것을 알 수 있었다.
Because Calcium Sulfo Aluminate(C_(4)A_(3)S^( ̄)-CSA) have properties of quick-setting, rapid-hardening, expansibility etc, it can be used in various ways as quick-setting cement, swelling cement etc. CSA clinker was synthesized by sintering the mixture of bauxite, lime, anhydrite at 1,300℃. But ther...
Because Calcium Sulfo Aluminate(C_(4)A_(3)S^( ̄)-CSA) have properties of quick-setting, rapid-hardening, expansibility etc, it can be used in various ways as quick-setting cement, swelling cement etc. CSA clinker was synthesized by sintering the mixture of bauxite, lime, anhydrite at 1,300℃. But there is no bauxite in KOREA. For this reason, CSA clinker compound was synthesized by using alunite[K_(2)SO_(4)·Al_(2)(SO_(4))_(3)·4Al(OH)_(3)] that there is sufficient in KOREA but has not been used. Alunite-CSA had the properties different from bauxite-CSA because of K_(2)SO_(4) that is contained in alunit. K_(2)SO_(4) in alunit formed langbenite(2CaSO_(4)·K_(2)SO_(4)) by reacting with CaSO_(4). In this study, langbenite was substituted for alunite-CSA, bauxite CSA to study the influence on hydration and the properties of langbenite. Setting time, hydration temperature, flow, compressive strength were measured to study the influence on hydration and XRD and SEM for hydrates. As a result, langbenite existed in needle-shaped on the surface of alunite-CSA particles. As the quantity of substitution increases the compressive strength decreased for long term and the initial setting was faster and flow dropped more than the case without substituting. In case of adding langbenite, as time goes by the increased in expansibility was slower. And as the quantity of substitution increased the rate of expansion got higher, It was confirmed that langbenite delayed creating ettringite by retarding the elution of Ca(OH)_(2) in CSA system materials and quick-setting by K_(2)SO_(4).
Because Calcium Sulfo Aluminate(C_(4)A_(3)S^( ̄)-CSA) have properties of quick-setting, rapid-hardening, expansibility etc, it can be used in various ways as quick-setting cement, swelling cement etc. CSA clinker was synthesized by sintering the mixture of bauxite, lime, anhydrite at 1,300℃. But there is no bauxite in KOREA. For this reason, CSA clinker compound was synthesized by using alunite[K_(2)SO_(4)·Al_(2)(SO_(4))_(3)·4Al(OH)_(3)] that there is sufficient in KOREA but has not been used. Alunite-CSA had the properties different from bauxite-CSA because of K_(2)SO_(4) that is contained in alunit. K_(2)SO_(4) in alunit formed langbenite(2CaSO_(4)·K_(2)SO_(4)) by reacting with CaSO_(4). In this study, langbenite was substituted for alunite-CSA, bauxite CSA to study the influence on hydration and the properties of langbenite. Setting time, hydration temperature, flow, compressive strength were measured to study the influence on hydration and XRD and SEM for hydrates. As a result, langbenite existed in needle-shaped on the surface of alunite-CSA particles. As the quantity of substitution increases the compressive strength decreased for long term and the initial setting was faster and flow dropped more than the case without substituting. In case of adding langbenite, as time goes by the increased in expansibility was slower. And as the quantity of substitution increased the rate of expansion got higher, It was confirmed that langbenite delayed creating ettringite by retarding the elution of Ca(OH)_(2) in CSA system materials and quick-setting by K_(2)SO_(4).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.