본 연구는 생활폐기물과 폐기물 소각재의 물리·화학적 특징과 열적 특성을 평가하여 생활폐기물의 무해화 처리를 위한 열분해 용융시스템의 설계·운전을 위한 기초자료로서 활용하는 것에 목적을 두었다. 생활폐기물에 대해서 삼성분·공업분석과 원소분석, 무기물 조성분석, 열분해 실험을 실시하였고, 소각재는 결정상과 무기물 조성분석을 실시한 후 소각재의 용융온도와 소각재 ...
본 연구는 생활폐기물과 폐기물 소각재의 물리·화학적 특징과 열적 특성을 평가하여 생활폐기물의 무해화 처리를 위한 열분해 용융시스템의 설계·운전을 위한 기초자료로서 활용하는 것에 목적을 두었다. 생활폐기물에 대해서 삼성분·공업분석과 원소분석, 무기물 조성분석, 열분해 실험을 실시하였고, 소각재는 결정상과 무기물 조성분석을 실시한 후 소각재의 용융온도와 소각재 슬래그의 점도를 알아보았다. 삼성분·공업분석 실험 결과, 생활폐기물은 수분을 제외하면 휘발분이 대부분을 차지하고 있으며, 탄소의 비율이 약 40%이다. 생활폐기물을 성분별로 6종류로 분류한 후 XRF로 각각의 무기물 조성을 분석한 결과, 종류별로 조성이 상이하였다. 열분해 실험에서 생활폐기물은 400-500℃ 정도에서 대부분의 반응이 이루어졌으며, 온도와 시간의 상관관계에서 온도가 더 많은 영향을 주는 인자로 판명되었다. 폐기물 소각재의 XRF 분석 결과에 의하면 바닥재와 비산재 모두 SiO_(2), Al_(2)O_(3) 및 CaO 함량이 약 70%로 대부분을 차지하고 있으며 특히 비산재는 다른 성분에 비하여 CaO의 함량이 높게 나타난다. 소각재의 XRD 분석결과, 바닥재의 경우는 CaCO_(3)와 NaCl이 주로 존재하고 비산재의 경우는 KCl, CaClOH가 주 결정상으로 존재하고 있다. 소각재의 용융온도 측정결과, 바닥재의 용융온도 범위는 1150 ~ 1220℃이며 비산재는 1350 ~ 1440℃이다. 비산재가 바닥재에 비해 상대적으로 높은 온도에서 융점을 보이고 있다. 점도 측정 결과는 비산재가 short slag, 바닥재가 true glass 형태의 용융형태를 나타내고 있으며 슬래그 점도 100poise의 온도범위는 바닥재가 1240 ~ 1300℃, 비산재가 1300 ~ 1350℃이다.
본 연구는 생활폐기물과 폐기물 소각재의 물리·화학적 특징과 열적 특성을 평가하여 생활폐기물의 무해화 처리를 위한 열분해 용융시스템의 설계·운전을 위한 기초자료로서 활용하는 것에 목적을 두었다. 생활폐기물에 대해서 삼성분·공업분석과 원소분석, 무기물 조성분석, 열분해 실험을 실시하였고, 소각재는 결정상과 무기물 조성분석을 실시한 후 소각재의 용융온도와 소각재 슬래그의 점도를 알아보았다. 삼성분·공업분석 실험 결과, 생활폐기물은 수분을 제외하면 휘발분이 대부분을 차지하고 있으며, 탄소의 비율이 약 40%이다. 생활폐기물을 성분별로 6종류로 분류한 후 XRF로 각각의 무기물 조성을 분석한 결과, 종류별로 조성이 상이하였다. 열분해 실험에서 생활폐기물은 400-500℃ 정도에서 대부분의 반응이 이루어졌으며, 온도와 시간의 상관관계에서 온도가 더 많은 영향을 주는 인자로 판명되었다. 폐기물 소각재의 XRF 분석 결과에 의하면 바닥재와 비산재 모두 SiO_(2), Al_(2)O_(3) 및 CaO 함량이 약 70%로 대부분을 차지하고 있으며 특히 비산재는 다른 성분에 비하여 CaO의 함량이 높게 나타난다. 소각재의 XRD 분석결과, 바닥재의 경우는 CaCO_(3)와 NaCl이 주로 존재하고 비산재의 경우는 KCl, CaClOH가 주 결정상으로 존재하고 있다. 소각재의 용융온도 측정결과, 바닥재의 용융온도 범위는 1150 ~ 1220℃이며 비산재는 1350 ~ 1440℃이다. 비산재가 바닥재에 비해 상대적으로 높은 온도에서 융점을 보이고 있다. 점도 측정 결과는 비산재가 short slag, 바닥재가 true glass 형태의 용융형태를 나타내고 있으며 슬래그 점도 100poise의 온도범위는 바닥재가 1240 ~ 1300℃, 비산재가 1300 ~ 1350℃이다.
The objectives of this research are to investigate the physical, chemical, and thermal characteristics of MSW and MSW incineration ash for basic engineering informations of melting system. Using municipal solid wastes, several kinds of experiments are carried out, which are proximate and ultimate an...
The objectives of this research are to investigate the physical, chemical, and thermal characteristics of MSW and MSW incineration ash for basic engineering informations of melting system. Using municipal solid wastes, several kinds of experiments are carried out, which are proximate and ultimate analyses of MSW, inorganic matter analyses of MSW incineration ash, pyrolysis of MSW, measurements of thermal pattern and slag viscosity of MSW incineration ash etc.. At the pyrolysis experiment of MSW, main reactions are occurred at the temperature ranges of about 400 - 500℃ and temperature is more important than reaction time, considering the operating conditions of pyrolysis system. Major crystalline phases of MSW incineration bottom ash are CaCO_(3) and NaCl, on the other hand those of fly ash are KCl and CaClOH. The viscosity of ash slag as a function of temperature, and the dependence of the viscosity-temperature behavior on slag composition, are important parameters in the successful operation of direct melting furnace of solid waste and the incineration ash melting furnace etc.. If these equipments are to operate successfully, the slag formed must be fluid enough to flow freely from the taphole. The viscosity of ash slag and its relationship to temperature and composition provide an evaluation of the suitability of solid wastes for use in such devices. The higher the alkali or alkaline earth content, the lower the viscosity at a given temperature. Municipal solid waste incineration bottom ash can be easily melted because calcium oxide reacts as an oxide donor to break apart the silicate polymers and thus to decrease viscosity. Temperature ranges corresponding the 20 Ns/㎡(200 poise) in the viscosity of municipal solid waste incineration fly ash are very critical because the slag melts are existed as partial liquid phases. So the operation temperature should be decided at the complete liquid phase.
The objectives of this research are to investigate the physical, chemical, and thermal characteristics of MSW and MSW incineration ash for basic engineering informations of melting system. Using municipal solid wastes, several kinds of experiments are carried out, which are proximate and ultimate analyses of MSW, inorganic matter analyses of MSW incineration ash, pyrolysis of MSW, measurements of thermal pattern and slag viscosity of MSW incineration ash etc.. At the pyrolysis experiment of MSW, main reactions are occurred at the temperature ranges of about 400 - 500℃ and temperature is more important than reaction time, considering the operating conditions of pyrolysis system. Major crystalline phases of MSW incineration bottom ash are CaCO_(3) and NaCl, on the other hand those of fly ash are KCl and CaClOH. The viscosity of ash slag as a function of temperature, and the dependence of the viscosity-temperature behavior on slag composition, are important parameters in the successful operation of direct melting furnace of solid waste and the incineration ash melting furnace etc.. If these equipments are to operate successfully, the slag formed must be fluid enough to flow freely from the taphole. The viscosity of ash slag and its relationship to temperature and composition provide an evaluation of the suitability of solid wastes for use in such devices. The higher the alkali or alkaline earth content, the lower the viscosity at a given temperature. Municipal solid waste incineration bottom ash can be easily melted because calcium oxide reacts as an oxide donor to break apart the silicate polymers and thus to decrease viscosity. Temperature ranges corresponding the 20 Ns/㎡(200 poise) in the viscosity of municipal solid waste incineration fly ash are very critical because the slag melts are existed as partial liquid phases. So the operation temperature should be decided at the complete liquid phase.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.