도금폐수는 시안과 중금속등을 다량 함유하고 있다. 현재 도금폐수 처리장은 이들 물질이 분리되지 않고 혼합되어 유입되기 때문에 혼합폐수를 처리해야 한다. 그러나 혼합폐수의 처리는 처리비용이 많이 들고 처리공정이 복잡해진다. 시안도금 폐수의 일반적인 처리법으로 사용하고 있는 알칼리염소법의 경우 고농도 시안화합물 폐수에 대해서는 완벽히 제거하지 못하여 많은 문제점을 가지고 있는 것이 현실이며, 특히 중금속과 동시에 배출되는 경우 뚜렷한 처리방법을 찾지 못하고 있는 실정이다. 본 연구에서는 도금폐수중의 시안화합물 및 Cu의 제거공정에 대한 ...
도금폐수는 시안과 중금속등을 다량 함유하고 있다. 현재 도금폐수 처리장은 이들 물질이 분리되지 않고 혼합되어 유입되기 때문에 혼합폐수를 처리해야 한다. 그러나 혼합폐수의 처리는 처리비용이 많이 들고 처리공정이 복잡해진다. 시안도금 폐수의 일반적인 처리법으로 사용하고 있는 알칼리염소법의 경우 고농도 시안화합물 폐수에 대해서는 완벽히 제거하지 못하여 많은 문제점을 가지고 있는 것이 현실이며, 특히 중금속과 동시에 배출되는 경우 뚜렷한 처리방법을 찾지 못하고 있는 실정이다. 본 연구에서는 도금폐수중의 시안화합물 및 Cu의 제거공정에 대한 전기분해법에 대한 최적처리 공정 및 조건에 목적을 두었다. 고농도 시안화합물 폐수인 CN 2,784 ppm, Cu 1,618 ppm을 전기분해법을 이용하여 NaCl 3%첨가, 전류밀도 30 Adm2, 반응시간 120분, pH 10의 조건에서 처리효율이 83%이상으로 측정되었다.
도금폐수는 시안과 중금속등을 다량 함유하고 있다. 현재 도금폐수 처리장은 이들 물질이 분리되지 않고 혼합되어 유입되기 때문에 혼합폐수를 처리해야 한다. 그러나 혼합폐수의 처리는 처리비용이 많이 들고 처리공정이 복잡해진다. 시안도금 폐수의 일반적인 처리법으로 사용하고 있는 알칼리염소법의 경우 고농도 시안화합물 폐수에 대해서는 완벽히 제거하지 못하여 많은 문제점을 가지고 있는 것이 현실이며, 특히 중금속과 동시에 배출되는 경우 뚜렷한 처리방법을 찾지 못하고 있는 실정이다. 본 연구에서는 도금폐수중의 시안화합물 및 Cu의 제거공정에 대한 전기분해법에 대한 최적처리 공정 및 조건에 목적을 두었다. 고농도 시안화합물 폐수인 CN 2,784 ppm, Cu 1,618 ppm을 전기분해법을 이용하여 NaCl 3%첨가, 전류밀도 30 Adm2, 반응시간 120분, pH 10의 조건에서 처리효율이 83%이상으로 측정되었다.
In the treatment of electroplating wastewater containing many heavy metals and cyanides. The treatment of wastewater without separating chromium-bearing electroplating wastewater and cyanide wastewater requires more complicated processes and higher treatment cost. The alkali chlorination method that...
In the treatment of electroplating wastewater containing many heavy metals and cyanides. The treatment of wastewater without separating chromium-bearing electroplating wastewater and cyanide wastewater requires more complicated processes and higher treatment cost. The alkali chlorination method that is commonly used to treat cyanide plating wastewater has many problems when the wastewater has high concentration of cyanide. It becomes more difficult if the wastewater contains heavy metals. In the study, the optimum conditions of each method for removing cyanide and heavy metal were investigated and the effect of the combination of each method were also examined. The high concentration of cyanide containing 2,784 ppm of CN and 1,618 ppm of Cu were removed by 83%. The optimum condition of electrolysis was NaCl 3%, current density of 30Adm2, reaction time of 120 minutes and pH 10.0.
In the treatment of electroplating wastewater containing many heavy metals and cyanides. The treatment of wastewater without separating chromium-bearing electroplating wastewater and cyanide wastewater requires more complicated processes and higher treatment cost. The alkali chlorination method that is commonly used to treat cyanide plating wastewater has many problems when the wastewater has high concentration of cyanide. It becomes more difficult if the wastewater contains heavy metals. In the study, the optimum conditions of each method for removing cyanide and heavy metal were investigated and the effect of the combination of each method were also examined. The high concentration of cyanide containing 2,784 ppm of CN and 1,618 ppm of Cu were removed by 83%. The optimum condition of electrolysis was NaCl 3%, current density of 30Adm2, reaction time of 120 minutes and pH 10.0.
주제어
#도금폐수 중금속 시안 구리 전기분해법 electroplating wastewater heavy metals cyanides cupper electrolysis
학위논문 정보
저자
송진수
학위수여기관
연세대학교 공학대학원
학위구분
국내석사
학과
화학공학 전공
지도교수
안익성
발행연도
2005
총페이지
v, 49장
키워드
도금폐수 중금속 시안 구리 전기분해법 electroplating wastewater heavy metals cyanides cupper electrolysis
※ AI-Helper는 부적절한 답변을 할 수 있습니다.