자동화재탐지설비는 경보설비중의 하나로서 건물 내에 발생한 화재를 초기 단계에서 자동적으로 감지하여 관계자에게 통보하는 설비로서 소화설비 이상으로 중요한 설비이다. 새로운 공간형태와 기술을 가지는 설계가 많아지고 있으며, 특히 기능과 용도에 있어 복합화 고도화를 요구하는 여러 가지 장치나 구조가 많아지고 있다. 이러한 추세에 따라 화재로 인한 인명과 재산피해는 건축물의 용도와 규모특성에 따라 다른 양상을 보이고 있으나 성능규정의 형태가 아닌 법규의 사양서적으로 규정된 국내 소방법은 설계기법이 획일적이어서 각기 다른 형태나 기능을 수용하는 건축물에 그 적용성 여부가 합리적이라고 보기 어려운 현실이다. 이에 현행 국내 소방법에 따른 감지기 설계 방식과 성능위주의 화재감지시스템 설계방식을 비교 분석하여 보다 우수한 성능의 화재감지시스템을 구축하고자 하였다. 본 연구를 통해서 다음과 같은 사항들을 확인 할 수 있었다. 1. 성능위주의 감지기 설치 방식에 의하면 감지기의 작동온도(본 연구에서는 71℃, 91℃를 사용함)에 따른 설계는 각 case별 감지기의 작동시간의 평균값을 낸 결과 감지기의 작동온도가 160˚(71℃)인 것은 두 설계방식의 감지기 작동시간이 약 5초 정도의 차이가 났으며, 감지기의 작동온도가 196˚F(91℃)인 것은 두 설계방식의 감지기 작동시간이 약 1초 정도의 차이가 났다. 이는 성능위주의 설계방식이 보다 더 적은 감지기의 개수를 설치하고도(국내:10개, 성능:6개) 거의 동등한 성능을 보임으로 국내소방법에 의한 설계보다 경제적임을 알 수 있었다. 2. 감지기의 설계시 설계대상물에 대한 화재성장속도를 Slow, Medium, ...
자동화재탐지설비는 경보설비중의 하나로서 건물 내에 발생한 화재를 초기 단계에서 자동적으로 감지하여 관계자에게 통보하는 설비로서 소화설비 이상으로 중요한 설비이다. 새로운 공간형태와 기술을 가지는 설계가 많아지고 있으며, 특히 기능과 용도에 있어 복합화 고도화를 요구하는 여러 가지 장치나 구조가 많아지고 있다. 이러한 추세에 따라 화재로 인한 인명과 재산피해는 건축물의 용도와 규모특성에 따라 다른 양상을 보이고 있으나 성능규정의 형태가 아닌 법규의 사양서적으로 규정된 국내 소방법은 설계기법이 획일적이어서 각기 다른 형태나 기능을 수용하는 건축물에 그 적용성 여부가 합리적이라고 보기 어려운 현실이다. 이에 현행 국내 소방법에 따른 감지기 설계 방식과 성능위주의 화재감지시스템 설계방식을 비교 분석하여 보다 우수한 성능의 화재감지시스템을 구축하고자 하였다. 본 연구를 통해서 다음과 같은 사항들을 확인 할 수 있었다. 1. 성능위주의 감지기 설치 방식에 의하면 감지기의 작동온도(본 연구에서는 71℃, 91℃를 사용함)에 따른 설계는 각 case별 감지기의 작동시간의 평균값을 낸 결과 감지기의 작동온도가 160˚(71℃)인 것은 두 설계방식의 감지기 작동시간이 약 5초 정도의 차이가 났으며, 감지기의 작동온도가 196˚F(91℃)인 것은 두 설계방식의 감지기 작동시간이 약 1초 정도의 차이가 났다. 이는 성능위주의 설계방식이 보다 더 적은 감지기의 개수를 설치하고도(국내:10개, 성능:6개) 거의 동등한 성능을 보임으로 국내소방법에 의한 설계보다 경제적임을 알 수 있었다. 2. 감지기의 설계시 설계대상물에 대한 화재성장속도를 Slow, Medium, Fast 로 나누어 실행한 결과 두 설계방식은 화재성장속도가 Slow인 경우 약 50초의 차이가 났으며, Medium인 경우는 14초의 차이를 보였고 마지막으로 Fast인 경우는 3초의 차이를 보였다. 이는 성능위주의 설계에서 감지기의 적정성 평가시 나온 결과(주어진 설계조건에서 감지기의 작동온도가 160˚F(71℃)인 감지기의 적용시 화재성장속도가 Slow와 Medium시에는 부적절하다).가 옳다는 것을 증명해 주고 있다. 다시 말해 예상화재성장속도를 감안하지 않은 부적절한 작동온도의 감지기를 설치하였을 경우 화재시 유효한 자동화재탐지설비가 될 수 없음을 보여준다. 3. 감지기의 설계시 일정 면적에 감지기의 개수를 얼마나 하느냐 보다 감지기를 감지기의 이격거리를 통해 얼마나 적정하게 배치하는냐가 화재시 화재감지를 하는데 더 중요한 역할을 한다는 것을 알 수 있었다. 앞으로 위의 평가를 토대로 본문에 소개된 성능위주의 Work Sheet를 활용하여 자동화재탐지설비 계획시 이용한다면 보다 합리적이고 효율적인 감지기설계가 가능한 것으로 사료된다.
자동화재탐지설비는 경보설비중의 하나로서 건물 내에 발생한 화재를 초기 단계에서 자동적으로 감지하여 관계자에게 통보하는 설비로서 소화설비 이상으로 중요한 설비이다. 새로운 공간형태와 기술을 가지는 설계가 많아지고 있으며, 특히 기능과 용도에 있어 복합화 고도화를 요구하는 여러 가지 장치나 구조가 많아지고 있다. 이러한 추세에 따라 화재로 인한 인명과 재산피해는 건축물의 용도와 규모특성에 따라 다른 양상을 보이고 있으나 성능규정의 형태가 아닌 법규의 사양서적으로 규정된 국내 소방법은 설계기법이 획일적이어서 각기 다른 형태나 기능을 수용하는 건축물에 그 적용성 여부가 합리적이라고 보기 어려운 현실이다. 이에 현행 국내 소방법에 따른 감지기 설계 방식과 성능위주의 화재감지시스템 설계방식을 비교 분석하여 보다 우수한 성능의 화재감지시스템을 구축하고자 하였다. 본 연구를 통해서 다음과 같은 사항들을 확인 할 수 있었다. 1. 성능위주의 감지기 설치 방식에 의하면 감지기의 작동온도(본 연구에서는 71℃, 91℃를 사용함)에 따른 설계는 각 case별 감지기의 작동시간의 평균값을 낸 결과 감지기의 작동온도가 160˚(71℃)인 것은 두 설계방식의 감지기 작동시간이 약 5초 정도의 차이가 났으며, 감지기의 작동온도가 196˚F(91℃)인 것은 두 설계방식의 감지기 작동시간이 약 1초 정도의 차이가 났다. 이는 성능위주의 설계방식이 보다 더 적은 감지기의 개수를 설치하고도(국내:10개, 성능:6개) 거의 동등한 성능을 보임으로 국내소방법에 의한 설계보다 경제적임을 알 수 있었다. 2. 감지기의 설계시 설계대상물에 대한 화재성장속도를 Slow, Medium, Fast 로 나누어 실행한 결과 두 설계방식은 화재성장속도가 Slow인 경우 약 50초의 차이가 났으며, Medium인 경우는 14초의 차이를 보였고 마지막으로 Fast인 경우는 3초의 차이를 보였다. 이는 성능위주의 설계에서 감지기의 적정성 평가시 나온 결과(주어진 설계조건에서 감지기의 작동온도가 160˚F(71℃)인 감지기의 적용시 화재성장속도가 Slow와 Medium시에는 부적절하다).가 옳다는 것을 증명해 주고 있다. 다시 말해 예상화재성장속도를 감안하지 않은 부적절한 작동온도의 감지기를 설치하였을 경우 화재시 유효한 자동화재탐지설비가 될 수 없음을 보여준다. 3. 감지기의 설계시 일정 면적에 감지기의 개수를 얼마나 하느냐 보다 감지기를 감지기의 이격거리를 통해 얼마나 적정하게 배치하는냐가 화재시 화재감지를 하는데 더 중요한 역할을 한다는 것을 알 수 있었다. 앞으로 위의 평가를 토대로 본문에 소개된 성능위주의 Work Sheet를 활용하여 자동화재탐지설비 계획시 이용한다면 보다 합리적이고 효율적인 감지기설계가 가능한 것으로 사료된다.
Fire detection system, that is one of the fire alarm system, is very important equipment to detect fire in building and a]arm to stakeholder. Today, the design which has a new space form and technology, especially the various devices or the structure which demands a composition and an advancement is...
Fire detection system, that is one of the fire alarm system, is very important equipment to detect fire in building and a]arm to stakeholder. Today, the design which has a new space form and technology, especially the various devices or the structure which demands a composition and an advancement is coming to be more little by little. In this trend, the life and property demage is decided by the quality of use and size of the building and they are visible different features. But the Korea fire regulation which follows in prescriptive-based is not appropriate to apply to the building with various configuration and function. The purpose of this study is to take new approach which can design more effective fire detection system thorough performance-based design for fire detection system The things we can confirm through this study are following: 1. In case of the design by performance-based design in accordance with the operating temperature of fire detector(71℃, 91℃ in this study), the results of average operating time of fire detector for each case appear that the operating time of fire detector of two design methods has a difference of about 5 seconds in the case the operating temperature of fire detector is 160˚F(71℃) and that has a difference of about 1 second in the case the operating temperature of fire detector is 196˚F(91℃). This result provide that the performance-based design with a few fire detector can design fire detection system which the function is equal with regulation and this method is more economic. 2. The result which it applies the fire growth rate(Slow, Medium, Fast) against the design objective, Slow has a average difference of about 50 seconds in the case the fire detection time, Medium has a average difference of about 14 seconds in the case the fire detection time, and Fast has a average difference of about 3 seconds in the case the fire detection time. This proves the result of performance based design which it is not appropriate to apply the fire detector which the operating temperature is 160˚F(71 ℃) to the p3ace fire growth rate is Slow or Medium is right. Namely the application of fire detector which does not consider a fire growth rate for design objective is not appropriate design. 3. This study appears that the important thing to detect fire is not the number of fire detector but the appropriate arrangement of the fire detector in area. This study will be a little help all fire fighting designer to design more effective and rational fire detection system.
Fire detection system, that is one of the fire alarm system, is very important equipment to detect fire in building and a]arm to stakeholder. Today, the design which has a new space form and technology, especially the various devices or the structure which demands a composition and an advancement is coming to be more little by little. In this trend, the life and property demage is decided by the quality of use and size of the building and they are visible different features. But the Korea fire regulation which follows in prescriptive-based is not appropriate to apply to the building with various configuration and function. The purpose of this study is to take new approach which can design more effective fire detection system thorough performance-based design for fire detection system The things we can confirm through this study are following: 1. In case of the design by performance-based design in accordance with the operating temperature of fire detector(71℃, 91℃ in this study), the results of average operating time of fire detector for each case appear that the operating time of fire detector of two design methods has a difference of about 5 seconds in the case the operating temperature of fire detector is 160˚F(71℃) and that has a difference of about 1 second in the case the operating temperature of fire detector is 196˚F(91℃). This result provide that the performance-based design with a few fire detector can design fire detection system which the function is equal with regulation and this method is more economic. 2. The result which it applies the fire growth rate(Slow, Medium, Fast) against the design objective, Slow has a average difference of about 50 seconds in the case the fire detection time, Medium has a average difference of about 14 seconds in the case the fire detection time, and Fast has a average difference of about 3 seconds in the case the fire detection time. This proves the result of performance based design which it is not appropriate to apply the fire detector which the operating temperature is 160˚F(71 ℃) to the p3ace fire growth rate is Slow or Medium is right. Namely the application of fire detector which does not consider a fire growth rate for design objective is not appropriate design. 3. This study appears that the important thing to detect fire is not the number of fire detector but the appropriate arrangement of the fire detector in area. This study will be a little help all fire fighting designer to design more effective and rational fire detection system.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.