문의 손잡이는 문을 여닫는 단순한 개폐기능뿐만 아니라 장식적인 기능을 겸하고, 건물의 초입(初入)에서 주인을 대신해 출입자들을 맞이하여 건물의 첫 인상을 느끼게 한다. 건축양식이 다양해짐에 따라 건축물의 일부분인 문과 손잡이에 대한 인식도 변화되어 개인의 개성을 충족시킬 수 있는 것으로 요구되고 있으나, 손잡이는 문 형태와 재질에서 제한된 디자인에 머물고 있어 기능성과 더불어 건물의 이미지나 용도를 고려한 손잡이의 연구가 필요하다. 따라서 현대인의 기호를 만족시킬 수 있는 소재나 디자인의 연구로 감각적인 실내외의 분위기를 연출하여 건물을 출입하는 사람들에게 신선함을 전달해주고자 시도하게 되었다. 본 연구에서는 잠금장치가 배제된 여닫이 방식의 출입문손잡이를 ...
문의 손잡이는 문을 여닫는 단순한 개폐기능뿐만 아니라 장식적인 기능을 겸하고, 건물의 초입(初入)에서 주인을 대신해 출입자들을 맞이하여 건물의 첫 인상을 느끼게 한다. 건축양식이 다양해짐에 따라 건축물의 일부분인 문과 손잡이에 대한 인식도 변화되어 개인의 개성을 충족시킬 수 있는 것으로 요구되고 있으나, 손잡이는 문 형태와 재질에서 제한된 디자인에 머물고 있어 기능성과 더불어 건물의 이미지나 용도를 고려한 손잡이의 연구가 필요하다. 따라서 현대인의 기호를 만족시킬 수 있는 소재나 디자인의 연구로 감각적인 실내외의 분위기를 연출하여 건물을 출입하는 사람들에게 신선함을 전달해주고자 시도하게 되었다. 본 연구에서는 잠금장치가 배제된 여닫이 방식의 출입문손잡이를 점토(粘土)의 물성을 이용하여 기존의 금속이나 목재에서 표현할 수 없는 새로운 형태와 색상으로 디자인하였다. 형태적인 면에서는 나비의 이미지를 모티브로 손잡이를 제작하여 건물을 출입하는 이들에게 직선적인 문에 곡선의 부드러운 이미지를 전달하고자 하였다. 도제(陶製) 문손잡이 제작에 있어, 재료적 특성상 내구성을 고려함과 동시에 문과의 조립을 위해 목재와의 접목으로 기능성에도 충실한 손잡이를 제작하여 기존의 손잡이와 차별화를 시도하였다. 제작방법은 석고틀을 이용한 이장주입성형으로 대량생산이 가능하도록 하였다. 시제품에 사용된 점토는 이장주입성형이 용이하고 발색이 좋으며 출입문에 설치 시 부드러운 촉감을 위하여 입자가 고운 자기질 점토를 사용하였으며, 색슬립을 이용한 마블링기법으로 부분장식을 하였다. 소성은 800℃에서 1차 소성한 후 투명유, 동유, 코발트유로 시유하여 1250℃에서 산화소성, 3차 소성은 수금을 입혀 전기가마에서 800℃로 소성하였다. 현대인의 요구에 부합되도록 건물의 이미지나 용도에 맞는 개성적인 도제 문손잡이를 제작하고자 하였다.
문의 손잡이는 문을 여닫는 단순한 개폐기능뿐만 아니라 장식적인 기능을 겸하고, 건물의 초입(初入)에서 주인을 대신해 출입자들을 맞이하여 건물의 첫 인상을 느끼게 한다. 건축양식이 다양해짐에 따라 건축물의 일부분인 문과 손잡이에 대한 인식도 변화되어 개인의 개성을 충족시킬 수 있는 것으로 요구되고 있으나, 손잡이는 문 형태와 재질에서 제한된 디자인에 머물고 있어 기능성과 더불어 건물의 이미지나 용도를 고려한 손잡이의 연구가 필요하다. 따라서 현대인의 기호를 만족시킬 수 있는 소재나 디자인의 연구로 감각적인 실내외의 분위기를 연출하여 건물을 출입하는 사람들에게 신선함을 전달해주고자 시도하게 되었다. 본 연구에서는 잠금장치가 배제된 여닫이 방식의 출입문손잡이를 점토(粘土)의 물성을 이용하여 기존의 금속이나 목재에서 표현할 수 없는 새로운 형태와 색상으로 디자인하였다. 형태적인 면에서는 나비의 이미지를 모티브로 손잡이를 제작하여 건물을 출입하는 이들에게 직선적인 문에 곡선의 부드러운 이미지를 전달하고자 하였다. 도제(陶製) 문손잡이 제작에 있어, 재료적 특성상 내구성을 고려함과 동시에 문과의 조립을 위해 목재와의 접목으로 기능성에도 충실한 손잡이를 제작하여 기존의 손잡이와 차별화를 시도하였다. 제작방법은 석고틀을 이용한 이장주입성형으로 대량생산이 가능하도록 하였다. 시제품에 사용된 점토는 이장주입성형이 용이하고 발색이 좋으며 출입문에 설치 시 부드러운 촉감을 위하여 입자가 고운 자기질 점토를 사용하였으며, 색슬립을 이용한 마블링기법으로 부분장식을 하였다. 소성은 800℃에서 1차 소성한 후 투명유, 동유, 코발트유로 시유하여 1250℃에서 산화소성, 3차 소성은 수금을 입혀 전기가마에서 800℃로 소성하였다. 현대인의 요구에 부합되도록 건물의 이미지나 용도에 맞는 개성적인 도제 문손잡이를 제작하고자 하였다.
Entrance and exist enables us to feel the first impression of building, and it plays the role of the function of opening and shutting to open and close door and the function of decoration. Today, as for all the life tools which are being used, new design is developed and the change of material and c...
Entrance and exist enables us to feel the first impression of building, and it plays the role of the function of opening and shutting to open and close door and the function of decoration. Today, as for all the life tools which are being used, new design is developed and the change of material and color which is based on individuality is being demanded without staying at the function of material, itself any more by the improvement of life level. As for the handle of the door for entrance and exit which is a part of building, it is considered that the study of handle which is suitable for the feature and image of building is necessary, so that sensible indoor and outdooe atmosphere may be produced. This researcher tried to design the handle of door for entrance and exit with the method of opening and closing that locking device is excluded, with diverse forms and colors to meet the image of restaurant, cafe and garden house. Now, as for the door for entrance and exit in inland buildings, pull & push method is being used for the most part. And, as for the material of handle, metal, wood and acryl etc. are being used mainly. In the side of form, it is manufactured with Chinese phoenix type, plate type and multiple type. So, there is practical nature but it is staying at limited design. This researcher tried to enable the people to use the handle of building to feel the composure even for a while by designing handle with the motive of soft curve of butterfly in linear building to increase by industry development. In manufacturing ceramic handle of door, this researcher considered the alleviation of shock by the frequent entrance and exit of building and the assembly with door. Besides, this researcher tried to make the differentiation from other handle by trying the grafting with wood so as to add decoration nature. As for manufacturing method, this researcher enabled mass production to made with the molding to inject slip that plaster frame is used. And, as for the base soil which was used in an equipment made on an experimental basis, this researcher used the molding to inject slip and the ceramic clay that chromogenic thing is good and particle is fine in consideration of touch at the time of installation. As for calcination, this researcher tried primary calcination at 800℃ and then glaze with tansparent glaze, copper glaze and cobalt glaze and then tried oxidation at 1250℃. And, as for tertiary calcination, this researcher tried calcination at 800℃ at electric kiln after coating liquid gold. This researcher manufactured the ceramic handle of door for entrance and exit that practical nature and aesthetic nature are considered with diverse designs. This researcher hopes that the development about the part which has not been studied yet may continue, so that fresh impression may be given to the people to enter and leave, though it is the small part of building.
Entrance and exist enables us to feel the first impression of building, and it plays the role of the function of opening and shutting to open and close door and the function of decoration. Today, as for all the life tools which are being used, new design is developed and the change of material and color which is based on individuality is being demanded without staying at the function of material, itself any more by the improvement of life level. As for the handle of the door for entrance and exit which is a part of building, it is considered that the study of handle which is suitable for the feature and image of building is necessary, so that sensible indoor and outdooe atmosphere may be produced. This researcher tried to design the handle of door for entrance and exit with the method of opening and closing that locking device is excluded, with diverse forms and colors to meet the image of restaurant, cafe and garden house. Now, as for the door for entrance and exit in inland buildings, pull & push method is being used for the most part. And, as for the material of handle, metal, wood and acryl etc. are being used mainly. In the side of form, it is manufactured with Chinese phoenix type, plate type and multiple type. So, there is practical nature but it is staying at limited design. This researcher tried to enable the people to use the handle of building to feel the composure even for a while by designing handle with the motive of soft curve of butterfly in linear building to increase by industry development. In manufacturing ceramic handle of door, this researcher considered the alleviation of shock by the frequent entrance and exit of building and the assembly with door. Besides, this researcher tried to make the differentiation from other handle by trying the grafting with wood so as to add decoration nature. As for manufacturing method, this researcher enabled mass production to made with the molding to inject slip that plaster frame is used. And, as for the base soil which was used in an equipment made on an experimental basis, this researcher used the molding to inject slip and the ceramic clay that chromogenic thing is good and particle is fine in consideration of touch at the time of installation. As for calcination, this researcher tried primary calcination at 800℃ and then glaze with tansparent glaze, copper glaze and cobalt glaze and then tried oxidation at 1250℃. And, as for tertiary calcination, this researcher tried calcination at 800℃ at electric kiln after coating liquid gold. This researcher manufactured the ceramic handle of door for entrance and exit that practical nature and aesthetic nature are considered with diverse designs. This researcher hopes that the development about the part which has not been studied yet may continue, so that fresh impression may be given to the people to enter and leave, though it is the small part of building.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.