Al_(2)O_(3) powder의 입자 크기와 첨가량에 따른 도자기 소지의 강화에 관하여 연구하였다. 기본소지에 입자 크기가 3㎛이하의 Al_(2)O_(3) powder를 첨가하였을 때 평균 입자 크기가 기본소지와 비슷한 10㎛이하의 입도 분포가 나타났고, 입자 크기가 5㎛이상의 Al_(2)O_(3) powder를 첨가한 소지에는 20㎛이상의 조립으로 편중된 입도 분포를 보여주었다. 소성한 소지들의 XRD분석 결과 입자 크기가 5㎛이상인 Al_(2)O_(3) powder를 첨가한 소지는 1220℃에서 mullite, cristobalite, wollastonite, orthoclase 결정상이 나타났으며, 다른 소성 소지들에서는 mullite, αquartz, α-corundum 결정상이 나타났다. 물리적 특성으로 겉보기 ...
Al_(2)O_(3) powder의 입자 크기와 첨가량에 따른 도자기 소지의 강화에 관하여 연구하였다. 기본소지에 입자 크기가 3㎛이하의 Al_(2)O_(3) powder를 첨가하였을 때 평균 입자 크기가 기본소지와 비슷한 10㎛이하의 입도 분포가 나타났고, 입자 크기가 5㎛이상의 Al_(2)O_(3) powder를 첨가한 소지에는 20㎛이상의 조립으로 편중된 입도 분포를 보여주었다. 소성한 소지들의 XRD분석 결과 입자 크기가 5㎛이상인 Al_(2)O_(3) powder를 첨가한 소지는 1220℃에서 mullite, cristobalite, wollastonite, orthoclase 결정상이 나타났으며, 다른 소성 소지들에서는 mullite, αquartz, α-corundum 결정상이 나타났다. 물리적 특성으로 겉보기 기공률, 흡수율은 1220℃에서 1350℃까지 감소하였으나, 부피비중은 1280℃이상에서 감소하였다. 1280℃ 소성 소지의 꺽임강도는 기본소지에 비해 일부 소지에서 최대 23%까지 증가하였으며, 기본소지와 입자 크기가 다른 Al_(2)O_(3) powder를 5%(dam12, dam2, dam9) 첨가한 소지의 저온영역의 200~500℃범위의 열팽창계수는 7.11×10-6, 6.99×10-6, 7.01×10-6 및 7.43×10-6으로 나타났고, 고온영역의 700~900℃범위에서는 4.29×10-6, 3.67×10-6, 3.74×10-6 및 4.94×10-6으로 나타났다. 기본소지와 입자 크기가 다른 Al2O3 powder(dam12, dam2, dam9)를 5% 첨가한 1280℃ 소성 소지의 미세구조(SEM)에서 mullite 섬유상 평균 두께는 247Å, 108Å, 261Å 및 140Å로 나타났다.
Al_(2)O_(3) powder의 입자 크기와 첨가량에 따른 도자기 소지의 강화에 관하여 연구하였다. 기본소지에 입자 크기가 3㎛이하의 Al_(2)O_(3) powder를 첨가하였을 때 평균 입자 크기가 기본소지와 비슷한 10㎛이하의 입도 분포가 나타났고, 입자 크기가 5㎛이상의 Al_(2)O_(3) powder를 첨가한 소지에는 20㎛이상의 조립으로 편중된 입도 분포를 보여주었다. 소성한 소지들의 XRD분석 결과 입자 크기가 5㎛이상인 Al_(2)O_(3) powder를 첨가한 소지는 1220℃에서 mullite, cristobalite, wollastonite, orthoclase 결정상이 나타났으며, 다른 소성 소지들에서는 mullite, αquartz, α-corundum 결정상이 나타났다. 물리적 특성으로 겉보기 기공률, 흡수율은 1220℃에서 1350℃까지 감소하였으나, 부피비중은 1280℃이상에서 감소하였다. 1280℃ 소성 소지의 꺽임강도는 기본소지에 비해 일부 소지에서 최대 23%까지 증가하였으며, 기본소지와 입자 크기가 다른 Al_(2)O_(3) powder를 5%(dam12, dam2, dam9) 첨가한 소지의 저온영역의 200~500℃범위의 열팽창계수는 7.11×10-6, 6.99×10-6, 7.01×10-6 및 7.43×10-6으로 나타났고, 고온영역의 700~900℃범위에서는 4.29×10-6, 3.67×10-6, 3.74×10-6 및 4.94×10-6으로 나타났다. 기본소지와 입자 크기가 다른 Al2O3 powder(dam12, dam2, dam9)를 5% 첨가한 1280℃ 소성 소지의 미세구조(SEM)에서 mullite 섬유상 평균 두께는 247Å, 108Å, 261Å 및 140Å로 나타났다.
Studied it on particle size of Al_(2)O_(3) powder and strengthenging of porcelain body in proportion to addition weight. When particle size added Al_(2)O_(3) powder of 3㎛ below to basis body, particle size distribution below it appeared with the 10㎛ that average particle size was similar to basis bo...
Studied it on particle size of Al_(2)O_(3) powder and strengthenging of porcelain body in proportion to addition weight. When particle size added Al_(2)O_(3) powder of 3㎛ below to basis body, particle size distribution below it appeared with the 10㎛ that average particle size was similar to basis body, and particle size showed 20㎛ particle size distribution by coarse grain on this in the bodies that added Al_(2)O_(3) powder on this to 5㎛. Crystal phase of mullite, cristobalite, wollastonite, orthoclase appeared with the bodies which XRD analysis results particle size of fired bodies for added the Al_(2)O_(3) powder which was a more than 5㎛ in 1220℃, but crystal phase appeared the mullite, α-quartz, α-corundum with different bodies. As for the physical characteristic, the appearance porosity and the water absorption rate decreased by 1350℃ in 1220℃, but the bulk specific gravity decreased in over than 1280℃. The bending strength of fired bodies increased by the largest 23% in some bodies than basis body in 1280℃. The thermal expansion modulus appeared with in 7.11×10-6, in 6.99×10-6, in 7.01×10-6 and 7.43×10-6 on basis body and particle size making it in the bodies low temperature zone(200~500℃) that added other Al2O3 powder(dam12, dam2, dam9) to 5%. Appeared with 4.29×10-6, 3.67×10-6, 3.74×10-6 and 4.94×10-6 in 700~900℃ of high temperature zone. As for the micro structure(SEM) of the fired bodies that basis body and 5% Al2O3 powder(dam12, dam2, dam9) addition in 1280℃, average thickness appeared with 247Å, 108Å, 261Å and 140Å on mullite whisker.
Studied it on particle size of Al_(2)O_(3) powder and strengthenging of porcelain body in proportion to addition weight. When particle size added Al_(2)O_(3) powder of 3㎛ below to basis body, particle size distribution below it appeared with the 10㎛ that average particle size was similar to basis body, and particle size showed 20㎛ particle size distribution by coarse grain on this in the bodies that added Al_(2)O_(3) powder on this to 5㎛. Crystal phase of mullite, cristobalite, wollastonite, orthoclase appeared with the bodies which XRD analysis results particle size of fired bodies for added the Al_(2)O_(3) powder which was a more than 5㎛ in 1220℃, but crystal phase appeared the mullite, α-quartz, α-corundum with different bodies. As for the physical characteristic, the appearance porosity and the water absorption rate decreased by 1350℃ in 1220℃, but the bulk specific gravity decreased in over than 1280℃. The bending strength of fired bodies increased by the largest 23% in some bodies than basis body in 1280℃. The thermal expansion modulus appeared with in 7.11×10-6, in 6.99×10-6, in 7.01×10-6 and 7.43×10-6 on basis body and particle size making it in the bodies low temperature zone(200~500℃) that added other Al2O3 powder(dam12, dam2, dam9) to 5%. Appeared with 4.29×10-6, 3.67×10-6, 3.74×10-6 and 4.94×10-6 in 700~900℃ of high temperature zone. As for the micro structure(SEM) of the fired bodies that basis body and 5% Al2O3 powder(dam12, dam2, dam9) addition in 1280℃, average thickness appeared with 247Å, 108Å, 261Å and 140Å on mullite whisker.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.