본 연구에서는 급결성 유동화 뒷채움 재료의 물리적 특성과 역학적 특성을 파악하여 토질 조건에 따른 배합비 설계기준을 제시하고 거동 특성을 파악하는데 그 목적이 있다.실내 시험에 사용한 급결성 유동화 뒷채움재 재료는 흙, 고결재료, 그리고 물이다. 시험 대상 흙 시료는 사질토, 점토, 그리고 혼합토로 구분되었으며 통일 분류법에 의해 사질토는 SP와 SW-SM, 점토는 ...
본 연구에서는 급결성 유동화 뒷채움 재료의 물리적 특성과 역학적 특성을 파악하여 토질 조건에 따른 배합비 설계기준을 제시하고 거동 특성을 파악하는데 그 목적이 있다.실내 시험에 사용한 급결성 유동화 뒷채움재 재료는 흙, 고결재료, 그리고 물이다. 시험 대상 흙 시료는 사질토, 점토, 그리고 혼합토로 구분되었으며 통일 분류법에 의해 사질토는 SP와 SW-SM, 점토는 CH, 그리고 혼합토는 사질토 중 SW-SM의 공학적 특성을 갖는 대상 시료에 점토 10 ~ 30%와 13mm 이하 자갈을 10 ~ 50% 각각 함유한 혼합토와 자갈 10%, 20%, 30%와 점토 10%, 20%가 각각 섞인 혼합토인 SW-SM, SP-SM, SC, 그리고 GP-GM로 분류되는 총 17 종류의 대상토를 사용하였다. 고결 재료는 보통 포틀랜드시멘트와 2종류의 급결제를 사용하여 실내 시험 목표 유동성과 일축압축강도의 만족 여부를 확인 한 후 만족하지 않을 경우 고함수토용 고화재를 사용하였다.고화재(A, B, C, D type)는 조강형 CAS(Calcium SulphoAluminate)시멘트, 포졸란, 알칼리 탄산염 촉진제로 구성되어 있고 구성성분 중 포졸란의 양을 증가 시킨 결과 유동성은 향상되었고 강도는 감소되는 저강도 특성을 나타내었다. 또한, 고화재는 조립토와 세립토의 물리적 특성에 따라 그 종류와 배합양이 차별적으로 적용되었다.사질토(SW-SM)에 자갈 함유량이 증가할수록 함수비는 감소하고 단위중량은 증가하는 반면 사질토에 점토 함유량이 증가할수록 함수비는 증가하고 단위중량은 감소하는 경향을 나타내었다. 급결성 유동화 채움재 재료로 사용 될 수 있는 흙 재료는 사질토에 자갈이 최대 50%까지 또는 점토가 최대 20%까지 함유된 조립토 임을 알 수 있었다. 급결성 유동화 뒷채움재의 열저항성은 단위중량, 토질의 구성성분, 그리고 시간에 많은 영향을 받고 있음을 알 수 있었다. 급결성 유동화 뒷채움재는 굴착 잔토를 재활용하여 고화재의 종류와 양을 차별적으로 적용한 결과 고유동의 열전도성이 탁월한 저강도 특성을 나타내어 기존의 모래로 다짐된 뒷채움재를 대체 할 수 있었으며, 그 결과 선정된 토질 조건에 따라 배합비 설계기준을 제시하였다.
본 연구에서는 급결성 유동화 뒷채움 재료의 물리적 특성과 역학적 특성을 파악하여 토질 조건에 따른 배합비 설계기준을 제시하고 거동 특성을 파악하는데 그 목적이 있다.실내 시험에 사용한 급결성 유동화 뒷채움재 재료는 흙, 고결재료, 그리고 물이다. 시험 대상 흙 시료는 사질토, 점토, 그리고 혼합토로 구분되었으며 통일 분류법에 의해 사질토는 SP와 SW-SM, 점토는 CH, 그리고 혼합토는 사질토 중 SW-SM의 공학적 특성을 갖는 대상 시료에 점토 10 ~ 30%와 13mm 이하 자갈을 10 ~ 50% 각각 함유한 혼합토와 자갈 10%, 20%, 30%와 점토 10%, 20%가 각각 섞인 혼합토인 SW-SM, SP-SM, SC, 그리고 GP-GM로 분류되는 총 17 종류의 대상토를 사용하였다. 고결 재료는 보통 포틀랜드시멘트와 2종류의 급결제를 사용하여 실내 시험 목표 유동성과 일축압축강도의 만족 여부를 확인 한 후 만족하지 않을 경우 고함수토용 고화재를 사용하였다.고화재(A, B, C, D type)는 조강형 CAS(Calcium SulphoAluminate)시멘트, 포졸란, 알칼리 탄산염 촉진제로 구성되어 있고 구성성분 중 포졸란의 양을 증가 시킨 결과 유동성은 향상되었고 강도는 감소되는 저강도 특성을 나타내었다. 또한, 고화재는 조립토와 세립토의 물리적 특성에 따라 그 종류와 배합양이 차별적으로 적용되었다.사질토(SW-SM)에 자갈 함유량이 증가할수록 함수비는 감소하고 단위중량은 증가하는 반면 사질토에 점토 함유량이 증가할수록 함수비는 증가하고 단위중량은 감소하는 경향을 나타내었다. 급결성 유동화 채움재 재료로 사용 될 수 있는 흙 재료는 사질토에 자갈이 최대 50%까지 또는 점토가 최대 20%까지 함유된 조립토 임을 알 수 있었다. 급결성 유동화 뒷채움재의 열저항성은 단위중량, 토질의 구성성분, 그리고 시간에 많은 영향을 받고 있음을 알 수 있었다. 급결성 유동화 뒷채움재는 굴착 잔토를 재활용하여 고화재의 종류와 양을 차별적으로 적용한 결과 고유동의 열전도성이 탁월한 저강도 특성을 나타내어 기존의 모래로 다짐된 뒷채움재를 대체 할 수 있었으며, 그 결과 선정된 토질 조건에 따라 배합비 설계기준을 제시하였다.
This study is to evaluate the physical and mechanical characteristics of flowable backfill and offer a guide line of mixture proportion based on soil types for constructing underground power utilities. Flowable backfill is known as soil-cement slurry, void fill, and controlled low-strength material(...
This study is to evaluate the physical and mechanical characteristics of flowable backfill and offer a guide line of mixture proportion based on soil types for constructing underground power utilities. Flowable backfill is known as soil-cement slurry, void fill, and controlled low-strength material(CLSM). The benefits of CLSM are reduced equipment costs, faster construction, re-excavation in the future, and the ability to place material in confined spaces such as narrow parts nearly impossible for compaction or perimeters of underground power cables. The flowable slurry mixtures made with 17 soil types and 6 types of accelerated mixtures in the laboratory were evaluated for flowability, heat resistance, and unconfined compressive strength to meet the target values of this study.Based on the results experimentally, it is found that quick-set flowable backfill material can replace sand backfill material which has generally used in a underground utilities construction. The recycle ratio of it ranged from 55% to 74%. The type and content of hardeners depend on the physical properties of soils so that the mechanical characteristics are evaluated within them. It is also found that the mixtures including up to 50% gravel and 20% clay contents in coarse grained soil can be used as accelerated backfill materials which were re-excavated after the construction of underground power cables. Finally, the filed guide line is proposed for optimal mixture ratio of flowable backfill materials.
This study is to evaluate the physical and mechanical characteristics of flowable backfill and offer a guide line of mixture proportion based on soil types for constructing underground power utilities. Flowable backfill is known as soil-cement slurry, void fill, and controlled low-strength material(CLSM). The benefits of CLSM are reduced equipment costs, faster construction, re-excavation in the future, and the ability to place material in confined spaces such as narrow parts nearly impossible for compaction or perimeters of underground power cables. The flowable slurry mixtures made with 17 soil types and 6 types of accelerated mixtures in the laboratory were evaluated for flowability, heat resistance, and unconfined compressive strength to meet the target values of this study.Based on the results experimentally, it is found that quick-set flowable backfill material can replace sand backfill material which has generally used in a underground utilities construction. The recycle ratio of it ranged from 55% to 74%. The type and content of hardeners depend on the physical properties of soils so that the mechanical characteristics are evaluated within them. It is also found that the mixtures including up to 50% gravel and 20% clay contents in coarse grained soil can be used as accelerated backfill materials which were re-excavated after the construction of underground power cables. Finally, the filed guide line is proposed for optimal mixture ratio of flowable backfill materials.
주제어
#급결성 유동화 뒷채움재
#유동화 채움재
#최적배합비
#유동화처리공법
#mixture content
#flowable backfill
#Controlled Low-Strength Material
#CLSM
#soil-cement slurry
#underground power utility
※ AI-Helper는 부적절한 답변을 할 수 있습니다.