본 연구에서는 후막형 용존산소 센서를 이용하여 휴대용 용존산소미터를 설계 및 제작하였다. 인가 전압에 따른 전류 특성을 조사한 결과, 인가전압을 0.7 V로 하였을 때 응답시간도 짧고 전류 값의 변화도 가장 크다는 것을 알 수 있었다. 용존산소 미터의 MCU는 PIC-BASIC사의 PB-3B모델을 사용하였고, 전원부, 아날로그신호 입력부, A/D 변환부, ...
본 연구에서는 후막형 용존산소 센서를 이용하여 휴대용 용존산소미터를 설계 및 제작하였다. 인가 전압에 따른 전류 특성을 조사한 결과, 인가전압을 0.7 V로 하였을 때 응답시간도 짧고 전류 값의 변화도 가장 크다는 것을 알 수 있었다. 용존산소 미터의 MCU는 PIC-BASIC사의 PB-3B모델을 사용하였고, 전원부, 아날로그신호 입력부, A/D 변환부, LCD 출력부, 키 입력부 및 통신포터와 연결되도록 하였다. 시스템 구성은 PICBASIC /2S + Multi I/O Unit, LCD Display /16 by 4, DC Power Regurator/ DC5V 공급 및 NoteBook(PIC Comfiler)으로 하였다. 아나로그 변환 값 0~4096(12bit)을 0~100 %로 표현되도록 프로그램하여 디스플레이(LCD)에 출력하였다. 제작된 용존산소미터는 용존산소 센서의 감도 변화에 따라 오차 ±0.5%의 정확도를 나타내었고, 기존 상용 용존산소 미터와 비교하여 산소 농도에 따른 전류의 변화를 측정한 결과 포화에 이르는 전류의 응답시간과 전류 값 변화가 유사하여 상용 용존산소 센서를 대치할 수 있을 것으로 기대된다.
본 연구에서는 후막형 용존산소 센서를 이용하여 휴대용 용존산소미터를 설계 및 제작하였다. 인가 전압에 따른 전류 특성을 조사한 결과, 인가전압을 0.7 V로 하였을 때 응답시간도 짧고 전류 값의 변화도 가장 크다는 것을 알 수 있었다. 용존산소 미터의 MCU는 PIC-BASIC사의 PB-3B모델을 사용하였고, 전원부, 아날로그신호 입력부, A/D 변환부, LCD 출력부, 키 입력부 및 통신포터와 연결되도록 하였다. 시스템 구성은 PICBASIC /2S + Multi I/O Unit, LCD Display /16 by 4, DC Power Regurator/ DC5V 공급 및 NoteBook(PIC Comfiler)으로 하였다. 아나로그 변환 값 0~4096(12bit)을 0~100 %로 표현되도록 프로그램하여 디스플레이(LCD)에 출력하였다. 제작된 용존산소미터는 용존산소 센서의 감도 변화에 따라 오차 ±0.5%의 정확도를 나타내었고, 기존 상용 용존산소 미터와 비교하여 산소 농도에 따른 전류의 변화를 측정한 결과 포화에 이르는 전류의 응답시간과 전류 값 변화가 유사하여 상용 용존산소 센서를 대치할 수 있을 것으로 기대된다.
The dissolved oxygen sensors with thick film type were fabricated by screen printing method, and portable dissolved oxygen meter was designed. The fabricated sensor has fast response of current changes according to dissolved oxygen concentrations in the applied voltage of 0.7 V. PB-3B model of PIC-B...
The dissolved oxygen sensors with thick film type were fabricated by screen printing method, and portable dissolved oxygen meter was designed. The fabricated sensor has fast response of current changes according to dissolved oxygen concentrations in the applied voltage of 0.7 V. PB-3B model of PIC-BASIC was used for MCU of D.O. meter, which was consisted of analog input, A/D converter, LCD display, key input and communication port. System was designed by PICBASIC /2S + multi I/O unit, LCD display /16 by 4, DC power regurator/ DC5V and laptop computer(PIC Comfiler). The fabricated dissolved oxygen meter had ±0.5% accuracy according to the sensitivity of dissolved oxygen sensors. This system is expected to apply a chip and/or disposal dissolved oxygen meters, replacing a commercial dissolved oxygen meters.
The dissolved oxygen sensors with thick film type were fabricated by screen printing method, and portable dissolved oxygen meter was designed. The fabricated sensor has fast response of current changes according to dissolved oxygen concentrations in the applied voltage of 0.7 V. PB-3B model of PIC-BASIC was used for MCU of D.O. meter, which was consisted of analog input, A/D converter, LCD display, key input and communication port. System was designed by PICBASIC /2S + multi I/O unit, LCD display /16 by 4, DC power regurator/ DC5V and laptop computer(PIC Comfiler). The fabricated dissolved oxygen meter had ±0.5% accuracy according to the sensitivity of dissolved oxygen sensors. This system is expected to apply a chip and/or disposal dissolved oxygen meters, replacing a commercial dissolved oxygen meters.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.