Column test를 통한 중금속 저감효율 및 고형화/안정화 적용 가능성 방안연구 (A) study on Removal Efficiency of Heavy Metals and Possibility of Solidification/Stabilization in Mine Tailings by Column Test원문보기
본 연구의 목적은 금속광산 개발이후 발생된 광미의 중금속 오염 저감을 위한 고형화/안정화 효율을 조사하는 것이다. 중금속의 처리효율을 조사하기 위하여 장군 연·아연광산, 제2연화 연·아연광산, 지시 금·은광산, 상동 중석광산에서 광미를 채취하였다. 오염도를 평가하기 위하여 0.1N HCl(Cd, Cu, Pb), 1N HCl(As), 왕수(...
본 연구의 목적은 금속광산 개발이후 발생된 광미의 중금속 오염 저감을 위한 고형화/안정화 효율을 조사하는 것이다. 중금속의 처리효율을 조사하기 위하여 장군 연·아연광산, 제2연화 연·아연광산, 지시 금·은광산, 상동 중석광산에서 광미를 채취하였다. 오염도를 평가하기 위하여 0.1N HCl(Cd, Cu, Pb), 1N HCl(As), 왕수(Zn, Ni), KSLT(한국폐기물용출실험), TCLP, SPLP(미국폐기물용출실험)등의 용출실험과 column test 이후 용출된 비소 및 중금속 농도를 AAS를 활용하여 측정하였다. 실험결과, 지시광산 광미에서의 비소 용출 농도는 토양오염 대책기준을 약 3,500배이상 초과하는 것으로 나타나 오염이 심각한 것으로 조사되었다. 지시광산을 제외한 광산에서의 Cd, Cu, Pb, Zn, Ni의 용출농도 역시 광산별로 편차는 있지만 대체로 높게 나타났다. 광미의 안정화 적용 가능성을 연구하기 위하여 인회석, 소석회 및 Bauxsol을 대상으로 column test를 실시하였다. 즉, 최상의 안정화 조건을 찾기 위하여 column test를 통해 용출특성 및 제거효율을 광미와 정화제 함량을 변화시킨 batch test(0, 1, 5, 10%)를 통해 156시간 동안 조사하였다. 3가지 안정화제의 효율성 비교연구결과, Ca(OH)_(2)가 지시광산에서 As는 최고 98%, Cd은 97%, Cu는 99%, Pb는 86%, Zn은 99%까지 안정화 처리효과가 나타났다. 인회석과 Bauxsol도 지시광산에서 각각 As는 최고 48, 96%, Cd은 61, 72%, Cu는 82, 96%, Pb는 77, 88%, Zn은 79, 81%까지 안정화 처리효과가 나타났다. 실험결과, 현재 중금속의 용출로 문제가 되고 있는 폐금속광산의 복원시 광미에 다량으로 함유되어 있는 비소 및 중금속을 효과적으로 고형화/안정화 시켜 처리 후 부피증가를 최소화하면서 2차오염의 우려가 없는 처리기술로 발전할 수 있을 것이며, 향후 세부적인 적용성 검증과 현장조건에 맞은 연구가 수반되어져야 할 것이다.
본 연구의 목적은 금속광산 개발이후 발생된 광미의 중금속 오염 저감을 위한 고형화/안정화 효율을 조사하는 것이다. 중금속의 처리효율을 조사하기 위하여 장군 연·아연광산, 제2연화 연·아연광산, 지시 금·은광산, 상동 중석광산에서 광미를 채취하였다. 오염도를 평가하기 위하여 0.1N HCl(Cd, Cu, Pb), 1N HCl(As), 왕수(Zn, Ni), KSLT(한국폐기물용출실험), TCLP, SPLP(미국폐기물용출실험)등의 용출실험과 column test 이후 용출된 비소 및 중금속 농도를 AAS를 활용하여 측정하였다. 실험결과, 지시광산 광미에서의 비소 용출 농도는 토양오염 대책기준을 약 3,500배이상 초과하는 것으로 나타나 오염이 심각한 것으로 조사되었다. 지시광산을 제외한 광산에서의 Cd, Cu, Pb, Zn, Ni의 용출농도 역시 광산별로 편차는 있지만 대체로 높게 나타났다. 광미의 안정화 적용 가능성을 연구하기 위하여 인회석, 소석회 및 Bauxsol을 대상으로 column test를 실시하였다. 즉, 최상의 안정화 조건을 찾기 위하여 column test를 통해 용출특성 및 제거효율을 광미와 정화제 함량을 변화시킨 batch test(0, 1, 5, 10%)를 통해 156시간 동안 조사하였다. 3가지 안정화제의 효율성 비교연구결과, Ca(OH)_(2)가 지시광산에서 As는 최고 98%, Cd은 97%, Cu는 99%, Pb는 86%, Zn은 99%까지 안정화 처리효과가 나타났다. 인회석과 Bauxsol도 지시광산에서 각각 As는 최고 48, 96%, Cd은 61, 72%, Cu는 82, 96%, Pb는 77, 88%, Zn은 79, 81%까지 안정화 처리효과가 나타났다. 실험결과, 현재 중금속의 용출로 문제가 되고 있는 폐금속광산의 복원시 광미에 다량으로 함유되어 있는 비소 및 중금속을 효과적으로 고형화/안정화 시켜 처리 후 부피증가를 최소화하면서 2차오염의 우려가 없는 처리기술로 발전할 수 있을 것이며, 향후 세부적인 적용성 검증과 현장조건에 맞은 연구가 수반되어져야 할 것이다.
The objective of this study is to evaluate removal efficiency of heavy metals and possibility of solidification/stabilization in mine tailings from abandoned mines. After reconnaissance survey for assessment the efficiency of heavy metals in mine tailings of the Janggun Pb-Zn mine, the second Yeonhw...
The objective of this study is to evaluate removal efficiency of heavy metals and possibility of solidification/stabilization in mine tailings from abandoned mines. After reconnaissance survey for assessment the efficiency of heavy metals in mine tailings of the Janggun Pb-Zn mine, the second Yeonhwa Pb-Zn mine, the Jisi Au-Ag mine, the Sangdong W mine in Korea, metal concentrations in the samples were measured using AAS as various extraction methods including by 0.1N HCl(Cd, Cu, Pb), 1N HCl(As), aqua regia(Zn, Ni) and leached by KSLT, TCLP and SPLP. During 156 hours, column test were examined to evaluate the possibility of apatite, lime and Bauxsol for remediation of mine wastes. The concentrations of toxic elements such as As, Cd, Cu, Pb, and Zn in tailings were varied depending upon mining types Comparing the effectiveness of three stabilizers, Ca(OH)_(2) showed better efficiency in term of preventing extraction at the JiSi mine with removal efficiency of As(98%), 97%(Cd), 99%(Cu), 86%(Pb) and 99%(Zn). Apatite and Bauxsol showed removal efficiency in term of preventing extraction at Cd(61, 72%), Cu(82, 96%), Pb(77, 88%), Zn(79, 81%) and As(48, 96%) at the Jisi mine, respectively. Result demonstrate that release characteristics of As and heavy metal from the mine tailings were varied upon each mine, heavy metals and experimental approached employed. Dynamic of metals under the natural conditions might be different from the laboratory results. Thus, Further researches including scale-up, long-term and several management options and can be considered to be necessary
The objective of this study is to evaluate removal efficiency of heavy metals and possibility of solidification/stabilization in mine tailings from abandoned mines. After reconnaissance survey for assessment the efficiency of heavy metals in mine tailings of the Janggun Pb-Zn mine, the second Yeonhwa Pb-Zn mine, the Jisi Au-Ag mine, the Sangdong W mine in Korea, metal concentrations in the samples were measured using AAS as various extraction methods including by 0.1N HCl(Cd, Cu, Pb), 1N HCl(As), aqua regia(Zn, Ni) and leached by KSLT, TCLP and SPLP. During 156 hours, column test were examined to evaluate the possibility of apatite, lime and Bauxsol for remediation of mine wastes. The concentrations of toxic elements such as As, Cd, Cu, Pb, and Zn in tailings were varied depending upon mining types Comparing the effectiveness of three stabilizers, Ca(OH)_(2) showed better efficiency in term of preventing extraction at the JiSi mine with removal efficiency of As(98%), 97%(Cd), 99%(Cu), 86%(Pb) and 99%(Zn). Apatite and Bauxsol showed removal efficiency in term of preventing extraction at Cd(61, 72%), Cu(82, 96%), Pb(77, 88%), Zn(79, 81%) and As(48, 96%) at the Jisi mine, respectively. Result demonstrate that release characteristics of As and heavy metal from the mine tailings were varied upon each mine, heavy metals and experimental approached employed. Dynamic of metals under the natural conditions might be different from the laboratory results. Thus, Further researches including scale-up, long-term and several management options and can be considered to be necessary
주제어
#Column test 중금속 고형화/안정화 용출특성 Heavy Metal Solidification/Stabilization Extraction characteristics
학위논문 정보
저자
지한구
학위수여기관
世明大學校 大學院
학위구분
국내석사
학과
환경안전시스템공학과
발행연도
2005
총페이지
ix, 94p.
키워드
Column test 중금속 고형화/안정화 용출특성 Heavy Metal Solidification/Stabilization Extraction characteristics
※ AI-Helper는 부적절한 답변을 할 수 있습니다.