졸-겔 법에 첨가제(Polyethylene glycol, Pluronic P123, Degussa P25, Quinacridone)를 이용하여 SnO2-doped TiO2 분말과 박막을 제조하였다. 출발 금속산화물로 titanium diisopropoxide bis(acetylacetonate) solution과 tin(Ⅳ) bis(acetylacetonate) dichloride를 사용하여 ...
졸-겔 법에 첨가제(Polyethylene glycol, Pluronic P123, Degussa P25, Quinacridone)를 이용하여 SnO2-doped TiO2 분말과 박막을 제조하였다. 출발 금속산화물로 titanium diisopropoxide bis(acetylacetonate) solution과 tin(Ⅳ) bis(acetylacetonate) dichloride를 사용하여 산 촉매 하에서 졸 용액을 합성하였다. TiO2와 dopant인 SnO2의 몰 비를 1 : 0.025 로 고정시키고, 첨가제의 종류를 변화시키면서 복합 산화물의 특성을 살펴보았다. 졸 용액의 반응 진행정도는 FT-IR spectroscopy로 관찰하였고, 겔 분말에 대한 열분석은 TG/DTA를 이용하였다. 분말과 박막의 구조적 특성은 XRD 분석을 통해 알아보았고, FE-SEM을 통해 입자크기와 균일도 및 박막의 두께를 관찰하였다. 박막의 성분은 EDS 분석을 통해 알아보았고, 표면 결합상태는 XPS spectroscopy로 측정하여 Sn과 Ti 모두 +4가의 결합상태를 갖는다는 것을 알았다. 이는 곧 titanium격자 내에 tin이 SnO2의 형태로 존재한다는 것을 의미한다. 합성된 분말과 박막의 광분해 효과는 환경오염물질로 Indigo Carmine (IC)을 선택하여 UV lamp 하에서 분해되는 과정을 UV-visible 분광광도계로 관찰하여 비교하였다.
졸-겔 법에 첨가제(Polyethylene glycol, Pluronic P123, Degussa P25, Quinacridone)를 이용하여 SnO2-doped TiO2 분말과 박막을 제조하였다. 출발 금속산화물로 titanium diisopropoxide bis(acetylacetonate) solution과 tin(Ⅳ) bis(acetylacetonate) dichloride를 사용하여 산 촉매 하에서 졸 용액을 합성하였다. TiO2와 dopant인 SnO2의 몰 비를 1 : 0.025 로 고정시키고, 첨가제의 종류를 변화시키면서 복합 산화물의 특성을 살펴보았다. 졸 용액의 반응 진행정도는 FT-IR spectroscopy로 관찰하였고, 겔 분말에 대한 열분석은 TG/DTA를 이용하였다. 분말과 박막의 구조적 특성은 XRD 분석을 통해 알아보았고, FE-SEM을 통해 입자크기와 균일도 및 박막의 두께를 관찰하였다. 박막의 성분은 EDS 분석을 통해 알아보았고, 표면 결합상태는 XPS spectroscopy로 측정하여 Sn과 Ti 모두 +4가의 결합상태를 갖는다는 것을 알았다. 이는 곧 titanium격자 내에 tin이 SnO2의 형태로 존재한다는 것을 의미한다. 합성된 분말과 박막의 광분해 효과는 환경오염물질로 Indigo Carmine (IC)을 선택하여 UV lamp 하에서 분해되는 과정을 UV-visible 분광광도계로 관찰하여 비교하였다.
The powders and thin films of SnO2-doped TiO2 with adding various structure-directing agents(Polyethylene glycol, Pluronic P123, Degussa P25, Quinacridone) were prepared by sol-gel process. Titanium diisopro- poxide bis(acetylacetonate) solution and tin(Ⅳ) bis(acetylacetonate) dichloride were used a...
The powders and thin films of SnO2-doped TiO2 with adding various structure-directing agents(Polyethylene glycol, Pluronic P123, Degussa P25, Quinacridone) were prepared by sol-gel process. Titanium diisopro- poxide bis(acetylacetonate) solution and tin(Ⅳ) bis(acetylacetonate) dichloride were used as precursors with HCl catalyst. The structure evolution of the reaction mixture was monitored by FT-IR spectroscopy. Hydolyzed sol were spin coated onto Si(100) wafer and it was pyrolyzed. The SnO2-doped TiO2 powders and thin films were annealed in air with different heat treatments. The thermal analysis of SnO2-doped TiO2 gel powders were studied by TG/DTA. The surface morphology, crystal structure, chemical composition and states of the powders and thin films has been observed by FE-SEM, XRD and XPS. The photocatalytic activity of powders and thin films were investigated by using indigo carmine solution as an unconsumed dye in the wastewater.
The powders and thin films of SnO2-doped TiO2 with adding various structure-directing agents(Polyethylene glycol, Pluronic P123, Degussa P25, Quinacridone) were prepared by sol-gel process. Titanium diisopro- poxide bis(acetylacetonate) solution and tin(Ⅳ) bis(acetylacetonate) dichloride were used as precursors with HCl catalyst. The structure evolution of the reaction mixture was monitored by FT-IR spectroscopy. Hydolyzed sol were spin coated onto Si(100) wafer and it was pyrolyzed. The SnO2-doped TiO2 powders and thin films were annealed in air with different heat treatments. The thermal analysis of SnO2-doped TiO2 gel powders were studied by TG/DTA. The surface morphology, crystal structure, chemical composition and states of the powders and thin films has been observed by FE-SEM, XRD and XPS. The photocatalytic activity of powders and thin films were investigated by using indigo carmine solution as an unconsumed dye in the wastewater.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.