경제 성장으로 인한 도시화로 현대에 들어와 대지의 필요한 요구 공간 증가 등의 이유로 비약적인 높이의 확장으로 발전하게 되었으며, 이러한 요구를 수용한 초고층 건축은 현대 건축물의 대표적 유형으로 자리 잡게 되었다. 초고층 건축이 도입됨에 따라 현대건축의 사용재료와 공법, 구조 형식 등의 변화를 가져오게 되었고, 건축가들은 건축물 구조의 다양화와 규격에 얽매이지 않는 자유로운 파사드의 표현방법을 추구하게 되었으며, 시공성 향상과 공기단축, 경제적 효용 등에 대한 장점에 ...
경제 성장으로 인한 도시화로 현대에 들어와 대지의 필요한 요구 공간 증가 등의 이유로 비약적인 높이의 확장으로 발전하게 되었으며, 이러한 요구를 수용한 초고층 건축은 현대 건축물의 대표적 유형으로 자리 잡게 되었다. 초고층 건축이 도입됨에 따라 현대건축의 사용재료와 공법, 구조 형식 등의 변화를 가져오게 되었고, 건축가들은 건축물 구조의 다양화와 규격에 얽매이지 않는 자유로운 파사드의 표현방법을 추구하게 되었으며, 시공성 향상과 공기단축, 경제적 효용 등에 대한 장점에 커튼월 시스템으로 건설되는 양상을 띠고 있다. 이러한 변화에 따라 상대적으로 실내 환경에 대한 누수나 결로에 관한 문제가 제기되고 있다. 이와 관련하여 실내 환경 문제 등에 관한 기존의 개별적인 연구 결과들이 존재하고 있지만 커튼월에서 일어나는 누수나 결로에 관한 접근이 미비한 실정이다. 따라서 본 연구에서는 커튼월 시스템에서 일어나는 누수, 결로의 발생 원인과 그 대책에 대하여 살펴 본 후, 커튼월에 관한 성능 평가를 실시, 분석하여 프로그램을 통한 시뮬레이션을 수행하였다. 먼저 누수 부분은 제조사가 제공한 등압원리에 의한 수밀시험을 분석 하였고, 결로 부분은 온도 및 습도 계측 장비 시스템으로 시험 분석하여 대책 방지를 파악 하였으며 그것을 토대로 실제 모델을 선정 한 후 시뮬레이션 실험을 통해 대책 방지 신뢰도를 확보하여 커튼월의 누수 및 결로에 관한 방지 대책을 예측할 수 있었다. 첫째, 커튼월에서 나타난 누수에 관한 원인을 조사한 결과 - 벽면에 균열 발생시(틈) - 외부와 접하는 창호 모서리 부분이 벌어졌을 시 (물) - 공사 하자로 실리콘 처리 상태가 불량시 누수 원인이 된 것으로 판단되었다 둘째, 커튼월에서 나타난 결로에 관한 원인을 조사한 결과 - 실내의 다습한 환경 - 실내 외부의 높은 온도차 - 단열 미흡 등으로 결로 원인이 된 것으로 판단되었다 셋째, 누수 시험으로 통해본 대책으로는 - 실리콘은 화학 재료로서 부재의 움직임이나 자외선에 의해 파괴 또는 균열이 갈수 있으므로 등압이론에 의한 재료를 선택하도록 한다 - Weather Strip은 Corner 연결부가 연속 되도록 한다 넷째, 결로 시험으로 통해본 대책으로는 - Fancoil Unit와 외기 사이에 설치된 Insulation Back-Panel은 반드시 커튼월 Frame 과 밀봉 한다 - 커튼월은 가능한 한 등압 공간을 두어 공기층을 형성하도록 한다. 다섯째, 누수 시뮬레이션 실험을 실시한 결과 - 풍압 50kgf(KS)에서 15분간 누수가 없음 - 풍압 75kgf(ASTM)에서 15분간 누수가 없음 - 풍압 100kgf에서 15분간 누수가 없음을 나타났다. 여섯째, 결로 시뮬레이션 실험을 실시한 결과 - 상부 내부 BAR 표면온도가 10 ~ 10.4℃로 결로가 생기지 않았고 - 중간부 내부 BAR 표면온도가 9.5 ~ 10.4℃로 결로가 생기지 않았고 - 하부 내부 BAR 표면온도가 9.6 ~ 9.8℃로 노점온도 9.5℃보다 높으므로 결로가 생기지 않은 것으로 나타났다.
경제 성장으로 인한 도시화로 현대에 들어와 대지의 필요한 요구 공간 증가 등의 이유로 비약적인 높이의 확장으로 발전하게 되었으며, 이러한 요구를 수용한 초고층 건축은 현대 건축물의 대표적 유형으로 자리 잡게 되었다. 초고층 건축이 도입됨에 따라 현대건축의 사용재료와 공법, 구조 형식 등의 변화를 가져오게 되었고, 건축가들은 건축물 구조의 다양화와 규격에 얽매이지 않는 자유로운 파사드의 표현방법을 추구하게 되었으며, 시공성 향상과 공기단축, 경제적 효용 등에 대한 장점에 커튼월 시스템으로 건설되는 양상을 띠고 있다. 이러한 변화에 따라 상대적으로 실내 환경에 대한 누수나 결로에 관한 문제가 제기되고 있다. 이와 관련하여 실내 환경 문제 등에 관한 기존의 개별적인 연구 결과들이 존재하고 있지만 커튼월에서 일어나는 누수나 결로에 관한 접근이 미비한 실정이다. 따라서 본 연구에서는 커튼월 시스템에서 일어나는 누수, 결로의 발생 원인과 그 대책에 대하여 살펴 본 후, 커튼월에 관한 성능 평가를 실시, 분석하여 프로그램을 통한 시뮬레이션을 수행하였다. 먼저 누수 부분은 제조사가 제공한 등압원리에 의한 수밀시험을 분석 하였고, 결로 부분은 온도 및 습도 계측 장비 시스템으로 시험 분석하여 대책 방지를 파악 하였으며 그것을 토대로 실제 모델을 선정 한 후 시뮬레이션 실험을 통해 대책 방지 신뢰도를 확보하여 커튼월의 누수 및 결로에 관한 방지 대책을 예측할 수 있었다. 첫째, 커튼월에서 나타난 누수에 관한 원인을 조사한 결과 - 벽면에 균열 발생시(틈) - 외부와 접하는 창호 모서리 부분이 벌어졌을 시 (물) - 공사 하자로 실리콘 처리 상태가 불량시 누수 원인이 된 것으로 판단되었다 둘째, 커튼월에서 나타난 결로에 관한 원인을 조사한 결과 - 실내의 다습한 환경 - 실내 외부의 높은 온도차 - 단열 미흡 등으로 결로 원인이 된 것으로 판단되었다 셋째, 누수 시험으로 통해본 대책으로는 - 실리콘은 화학 재료로서 부재의 움직임이나 자외선에 의해 파괴 또는 균열이 갈수 있으므로 등압이론에 의한 재료를 선택하도록 한다 - Weather Strip은 Corner 연결부가 연속 되도록 한다 넷째, 결로 시험으로 통해본 대책으로는 - Fancoil Unit와 외기 사이에 설치된 Insulation Back-Panel은 반드시 커튼월 Frame 과 밀봉 한다 - 커튼월은 가능한 한 등압 공간을 두어 공기층을 형성하도록 한다. 다섯째, 누수 시뮬레이션 실험을 실시한 결과 - 풍압 50kgf(KS)에서 15분간 누수가 없음 - 풍압 75kgf(ASTM)에서 15분간 누수가 없음 - 풍압 100kgf에서 15분간 누수가 없음을 나타났다. 여섯째, 결로 시뮬레이션 실험을 실시한 결과 - 상부 내부 BAR 표면온도가 10 ~ 10.4℃로 결로가 생기지 않았고 - 중간부 내부 BAR 표면온도가 9.5 ~ 10.4℃로 결로가 생기지 않았고 - 하부 내부 BAR 표면온도가 9.6 ~ 9.8℃로 노점온도 9.5℃보다 높으므로 결로가 생기지 않은 것으로 나타났다.
Modern buildings have been grown into a dramatic expansion of height due to the reasons such as increase of requirement space of the land with the urbanization by the economic development and ultra high-rise buildings now have settled as a typical type of modern buildings. With the introduction of u...
Modern buildings have been grown into a dramatic expansion of height due to the reasons such as increase of requirement space of the land with the urbanization by the economic development and ultra high-rise buildings now have settled as a typical type of modern buildings. With the introduction of ultra high-rise buildings, materials of use, methods of construction, and types of structure of modern buildings have been changed and architects began to pursue a free expression method of passade without being bound by the diversity and dimension of building structure. And modern buildings are being constructed in curtain wall system in addition to the advantages of the improvement of workability of construction, shortening the construction periods, and economic utilities. According to this change, problems of leakage of water or dew condensation in the indoor environment are being raised relatively. In this regard, there are results of existing individual research on problems of indoor environment but approaches to leakage of water or dew condensation generated in curtain walls are almost none. Therefore, in this study, performance evaluation and analysis of curtain wall system was carried out after causes and countermeasures of leakage of water and dew condensation generated in curtain wall systems were reviewed and simulation through the programs was conducted. First of all, in the part of leakage of water, watertightness test was analyzed according to the principle of the equal pressure provided by manufacturers and in the part of dew condensation, prevention of countermeasure was reviewed with a measurement device system of temperature and humidity and based on this, it was possible to predict the countermeasure of prevention of leakage of water and dew condensation of curtain walls by securing the reliability of countermeasure of prevention through simulation test after selecting actual model. First, as the results of investigation of causes of leakage of water generated in curtain walls, it was judged that leakage of water breaks out - when cracks (crevices) are generated on wall surfaces, - when corner parts of window door contacting with outside are opened (water), -and when status of silicon treatment is poor due to defects of construction works. Second, as the results of investigation of causes of dew condensation generated in curtain walls, it was judged that dew condensation breaks out when - when indoor is in very humid environment, - when there is a high difference of temperature between inside and outside, - and when insulation is poor. Third, as countermeasures through the test of leakage of water, - materials shall be selected by the theory of the equal pressure since silicon can be destructed or cracked by the movement of members or by the ultraviolet rays and - Weather Strip shall be connected to the part of corner in continuance. Fourth, as countermeasures through the test of dew condensation, - Insulation back-panel installed between fan coil unit and outdoor device shall be definitively sealed with the frame of curtain walls and - curtain wall shall form layer of air as possible as can by providing space of the equal pressure. Fifth, as the result of the simulation test of leakage of water, - there was no leakage of water in the wind pressure of 50kgf (KS) for 15 minutes, - there was no leakage of water in the wind pressure of 75kgf (ASTM) for 15 minutes, and - there was no leakage of water in the wind pressure of 100kgf for 15 minutes. Sixth, as the result of the simulation test of dew condensation, - there broke out no dew condensation when BAR surface temperature of the upper part of Inside was 10 ~ 10.4℃, - there broke out no dew condensation when BAR surface temperature of the middle part of inside was 9.5 ~ 10.4℃, and - there broke out no dew condensation when BAR surface temperature of the lower part of inside was 9.6 ~ 9.8℃ because it was higher than the dew point temperature of 9.5℃.
Modern buildings have been grown into a dramatic expansion of height due to the reasons such as increase of requirement space of the land with the urbanization by the economic development and ultra high-rise buildings now have settled as a typical type of modern buildings. With the introduction of ultra high-rise buildings, materials of use, methods of construction, and types of structure of modern buildings have been changed and architects began to pursue a free expression method of passade without being bound by the diversity and dimension of building structure. And modern buildings are being constructed in curtain wall system in addition to the advantages of the improvement of workability of construction, shortening the construction periods, and economic utilities. According to this change, problems of leakage of water or dew condensation in the indoor environment are being raised relatively. In this regard, there are results of existing individual research on problems of indoor environment but approaches to leakage of water or dew condensation generated in curtain walls are almost none. Therefore, in this study, performance evaluation and analysis of curtain wall system was carried out after causes and countermeasures of leakage of water and dew condensation generated in curtain wall systems were reviewed and simulation through the programs was conducted. First of all, in the part of leakage of water, watertightness test was analyzed according to the principle of the equal pressure provided by manufacturers and in the part of dew condensation, prevention of countermeasure was reviewed with a measurement device system of temperature and humidity and based on this, it was possible to predict the countermeasure of prevention of leakage of water and dew condensation of curtain walls by securing the reliability of countermeasure of prevention through simulation test after selecting actual model. First, as the results of investigation of causes of leakage of water generated in curtain walls, it was judged that leakage of water breaks out - when cracks (crevices) are generated on wall surfaces, - when corner parts of window door contacting with outside are opened (water), -and when status of silicon treatment is poor due to defects of construction works. Second, as the results of investigation of causes of dew condensation generated in curtain walls, it was judged that dew condensation breaks out when - when indoor is in very humid environment, - when there is a high difference of temperature between inside and outside, - and when insulation is poor. Third, as countermeasures through the test of leakage of water, - materials shall be selected by the theory of the equal pressure since silicon can be destructed or cracked by the movement of members or by the ultraviolet rays and - Weather Strip shall be connected to the part of corner in continuance. Fourth, as countermeasures through the test of dew condensation, - Insulation back-panel installed between fan coil unit and outdoor device shall be definitively sealed with the frame of curtain walls and - curtain wall shall form layer of air as possible as can by providing space of the equal pressure. Fifth, as the result of the simulation test of leakage of water, - there was no leakage of water in the wind pressure of 50kgf (KS) for 15 minutes, - there was no leakage of water in the wind pressure of 75kgf (ASTM) for 15 minutes, and - there was no leakage of water in the wind pressure of 100kgf for 15 minutes. Sixth, as the result of the simulation test of dew condensation, - there broke out no dew condensation when BAR surface temperature of the upper part of Inside was 10 ~ 10.4℃, - there broke out no dew condensation when BAR surface temperature of the middle part of inside was 9.5 ~ 10.4℃, and - there broke out no dew condensation when BAR surface temperature of the lower part of inside was 9.6 ~ 9.8℃ because it was higher than the dew point temperature of 9.5℃.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.