본 연구에서는 이색 현상의 원인이 되는 여러 변수들인 조색, 실험실 온도, 습도, 광원, 작업자의 숙련도 등을 동일하게 유지하였다는 조건에서 은색에 관하여 블랜딩 보수 도장을 실시하여 통상적으로 이색 현상의 정도를 정량적으로 나타내는 ΔE^(*)로 평가하였다. 또한 자동차사에 공급하는 각 페인트사의 제품 간의 색차를 측정하기 위하여 흰색의 페인트를 이용하여 초기 페인트 제품과 동일한 회사 제품과 다른 2개의 회사 제품으로 도색하여 색차를 비교 평가하였다. 은색에 대한 보수 도장시 ΔE^(*)의 값의 경우 ...
본 연구에서는 이색 현상의 원인이 되는 여러 변수들인 조색, 실험실 온도, 습도, 광원, 작업자의 숙련도 등을 동일하게 유지하였다는 조건에서 은색에 관하여 블랜딩 보수 도장을 실시하여 통상적으로 이색 현상의 정도를 정량적으로 나타내는 ΔE^(*)로 평가하였다. 또한 자동차사에 공급하는 각 페인트사의 제품 간의 색차를 측정하기 위하여 흰색의 페인트를 이용하여 초기 페인트 제품과 동일한 회사 제품과 다른 2개의 회사 제품으로 도색하여 색차를 비교 평가하였다. 은색에 대한 보수 도장시 ΔE^(*)의 값의 경우 스크래치로 인한 두꺼운 보수 도막을 형성한 후 원래 도색과 유사하도록 보수 도장시 외곽으로 갈수록 차이값을 줄인다는 가정하에 완만하게 그 값이 감소하는 경향으로 나타났으며 그 값은 최대 1.74, 최소 0.2로 나타났다. 또한 ΔE^(*)의 값의 경우 25° 보다는 45°, 75°에서 원래 도색의 색에 접근하는 경향이 75°가 가장 적절한 경향을 나타내었다. b^(*)의 값의 경우도 모든 각도에서 완만하게 값이 감소하는 것으로 나타났다. 은색에 대한 보수 도장시 ΔE^(*)의 값의 경우 가장 영향을 미치는 인자는 L^(*), a^(*),b^(*)인자 중에 은색이 무채색인관계로 명도를 나타내는 L^(*) 인자가 주도하였다. 흰색 페인트에 대한 페인트 공급사의 색차 ΔE^(*)를 측정한 결과 동일한 회사의 페인트의 경우 다른 로트의 제품이 0.98이며 다른 회사의 경우 1.05, 1.27로 나타났다.
본 연구에서는 이색 현상의 원인이 되는 여러 변수들인 조색, 실험실 온도, 습도, 광원, 작업자의 숙련도 등을 동일하게 유지하였다는 조건에서 은색에 관하여 블랜딩 보수 도장을 실시하여 통상적으로 이색 현상의 정도를 정량적으로 나타내는 ΔE^(*)로 평가하였다. 또한 자동차사에 공급하는 각 페인트사의 제품 간의 색차를 측정하기 위하여 흰색의 페인트를 이용하여 초기 페인트 제품과 동일한 회사 제품과 다른 2개의 회사 제품으로 도색하여 색차를 비교 평가하였다. 은색에 대한 보수 도장시 ΔE^(*)의 값의 경우 스크래치로 인한 두꺼운 보수 도막을 형성한 후 원래 도색과 유사하도록 보수 도장시 외곽으로 갈수록 차이값을 줄인다는 가정하에 완만하게 그 값이 감소하는 경향으로 나타났으며 그 값은 최대 1.74, 최소 0.2로 나타났다. 또한 ΔE^(*)의 값의 경우 25° 보다는 45°, 75°에서 원래 도색의 색에 접근하는 경향이 75°가 가장 적절한 경향을 나타내었다. b^(*)의 값의 경우도 모든 각도에서 완만하게 값이 감소하는 것으로 나타났다. 은색에 대한 보수 도장시 ΔE^(*)의 값의 경우 가장 영향을 미치는 인자는 L^(*), a^(*),b^(*)인자 중에 은색이 무채색인관계로 명도를 나타내는 L^(*) 인자가 주도하였다. 흰색 페인트에 대한 페인트 공급사의 색차 ΔE^(*)를 측정한 결과 동일한 회사의 페인트의 경우 다른 로트의 제품이 0.98이며 다른 회사의 경우 1.05, 1.27로 나타났다.
The measure of color difference ΔE^(*) during blending paint process was evaluated quantitatively using a silver color paint by fixing color matching, laboratory temperature and humidity, light source and worker's skill which are the main factors of color difference. Also, the ΔE^(*) values of white...
The measure of color difference ΔE^(*) during blending paint process was evaluated quantitatively using a silver color paint by fixing color matching, laboratory temperature and humidity, light source and worker's skill which are the main factors of color difference. Also, the ΔE^(*) values of white color paints from the same company and other 2 companies were measured in order to evaluate the color difference of the same color paint from same and different product companies, The value of ΔE^(*) tends to be decrease as the location is far way from the original scratch after the blending painting of silver color assuming that the original scratch was covered with thicker paint and then with thinner paint. The maximum and minimum values are 1.74 and 0.2, respectively. A specular view angle of 75 degree is the proper angle to view the smooth color difference rather than 25 and 45 degrees. The value of b^(*) has tendence to decrease as the location is far way from the original scratch after the blending painting of silver color with respect to 3 angles. The factor of ΔE^(*) is mainly controlled by the value of lightness factor L^(*) rather than a^(*) and b^(*) factors because that the silver paint is an achromatic color. The ΔE^(*) values of white color paints from the same company and other 2 companies were measured to be 0.98 and 1.05 and 1.27, respectively.
The measure of color difference ΔE^(*) during blending paint process was evaluated quantitatively using a silver color paint by fixing color matching, laboratory temperature and humidity, light source and worker's skill which are the main factors of color difference. Also, the ΔE^(*) values of white color paints from the same company and other 2 companies were measured in order to evaluate the color difference of the same color paint from same and different product companies, The value of ΔE^(*) tends to be decrease as the location is far way from the original scratch after the blending painting of silver color assuming that the original scratch was covered with thicker paint and then with thinner paint. The maximum and minimum values are 1.74 and 0.2, respectively. A specular view angle of 75 degree is the proper angle to view the smooth color difference rather than 25 and 45 degrees. The value of b^(*) has tendence to decrease as the location is far way from the original scratch after the blending painting of silver color with respect to 3 angles. The factor of ΔE^(*) is mainly controlled by the value of lightness factor L^(*) rather than a^(*) and b^(*) factors because that the silver paint is an achromatic color. The ΔE^(*) values of white color paints from the same company and other 2 companies were measured to be 0.98 and 1.05 and 1.27, respectively.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.