누진가입도렌즈의 광학적 특성을 측정하고 디자인에 따른 원용부와 중간거리부 및 근용부의 분포도를 분석하여 임상에서 착용자의 요구에 적합한 디자인을 선택하는데 참고할만한 지침을 제시하고자 하였다. 국내에서 유통되고 있는 누진가입도렌즈 34종(우안용, 원용부 굴절력 Plano, 가입도 +2.00D)을 무작위로 수집하여, VM 2000 (Visionix Ltd. lsrael) 렌즈분석기로 광학적 특성을 측정하고, 원주도수 0.50D(등가구면도수 0.25D)를 명시범위의 한계로 적용하여 원용부, 중간거리부 및 근용부 유효시야를 수직방향으로 1mm 단계로 분석하였다. 가입도 +2.00D를 기준으로 최대 비점수차량은 최소 -1.91D, 최대 -3.56D, 평균 -2.32±0.37D였고, 원용부 ...
누진가입도렌즈의 광학적 특성을 측정하고 디자인에 따른 원용부와 중간거리부 및 근용부의 분포도를 분석하여 임상에서 착용자의 요구에 적합한 디자인을 선택하는데 참고할만한 지침을 제시하고자 하였다. 국내에서 유통되고 있는 누진가입도렌즈 34종(우안용, 원용부 굴절력 Plano, 가입도 +2.00D)을 무작위로 수집하여, VM 2000 (Visionix Ltd. lsrael) 렌즈분석기로 광학적 특성을 측정하고, 원주도수 0.50D(등가구면도수 0.25D)를 명시범위의 한계로 적용하여 원용부, 중간거리부 및 근용부 유효시야를 수직방향으로 1mm 단계로 분석하였다. 가입도 +2.00D를 기준으로 최대 비점수차량은 최소 -1.91D, 최대 -3.56D, 평균 -2.32±0.37D였고, 원용부 유효면적은 최소 9.17mm², 최대 91.25mm², 평균 30.57±17.20mm²였고, 중간거리부 유효면적은 최소 10.52mm², 최대 41.21mm², 평균 19.56±6.38mm²였고, 가입도 1.75D가 처음 나타나는 위치는 피팅기준점으로부터 최소 10.35mm, 최대18.16mm 평균 13.53±2.02mm였고, 피팅기준점으로 부터 21.5mm까지에서 가입도 +1.75D 이상의 근용부 유효면적은 최소 26.58mm², 최대 111.25mm², 평균 62.31±18.07mm²였다. 여러 가지 측정변수에 대하여 렌즈 사이에 큰 편차를 보였으며, 원용부와 중간거리부 그리고 근용부의 면적 및 수평방향의 폭을 기준으로 유용성의 서열을 측정할 수 있었다. 각 측정변수의 측정값을 기준으로 원용부, 중간거리부와 근용부의 평가점수를 산정하여 PAL의 착용자의 요구에 따른 평가를 하였다. 원용부에서는 I-1 99.6점과 K-1 76.6점으로 각각 높고, N-1 12.7점과 E-1 17.4점으로 낮게 측정되었고, 중간거리부에서는 F-3 82.0점과 B-2 81.4점으로 각각 shb고, D-4 19.9점과 N-1 25.5점으로 낮게 측정되었으며, 원용부와 근용부에서 비점수차 25%을 적용시 I-1 68.2점과 A-3 65.7점으로 높고, C-3 36.4점과 I-3 38.4점으로 낮게 측정되었다. 상관성 검사에서는 측정변수 상호간의 상관관계에서는 원용부 면적과 근용부 면적 사이에서 음의 상관성을 보였고(r=-0.551, p=0.001), 원용부 면적과 중간거리부 면적 사이에서는 상관성이 없었다(r=0.068, p=0.703). 원용부 면적과 최초가입도 위치 사이에는 높은 상관성을 보였다(r=0.605, p=0.000). 제조사에서 제시한 피팅기준점 높이와 원용부 폭 사이에서 유의한 상관성이 있었으며(r=0.344, p=0.013), 피팅기준점 높이와 면적 사이에서도 유의한 상관성이 있었다(r=0.337, p=0.015). 제조사에서 제시한 최소피팅높이와 원용부 면적 사이에서 유의한 상관성이 있었고(r=0.470, r=0.000), 중간거리부 면적 사이에서 유의한 상관성이 있었고(r=0.414, p=0.002), 가입도 +1.75D 최초 발견되는 거리 사이에서 유의한 상관성 있었고(r=0.542, p=0.000), 근용부 면적 사이에서 유의한 음의 상관성이 있었다(r=-0.377, p=0.004). 이상으로부터 누진가입도렌즈의 디자인에 따른 여러 가지 광학적 특성의 차이를 분석하고 원용부와 근용부 및 중간거리부의 유용성에 관한 서열화와 각각의 변수간 상관관계를 고려하여 임상에서 착용자의 시각적 요구에 적합한 디자인을 선택하고 조제하는데 유용하게 참고할 수 있는 자료를 제시한 것으로 사료된다.
누진가입도렌즈의 광학적 특성을 측정하고 디자인에 따른 원용부와 중간거리부 및 근용부의 분포도를 분석하여 임상에서 착용자의 요구에 적합한 디자인을 선택하는데 참고할만한 지침을 제시하고자 하였다. 국내에서 유통되고 있는 누진가입도렌즈 34종(우안용, 원용부 굴절력 Plano, 가입도 +2.00D)을 무작위로 수집하여, VM 2000 (Visionix Ltd. lsrael) 렌즈분석기로 광학적 특성을 측정하고, 원주도수 0.50D(등가구면도수 0.25D)를 명시범위의 한계로 적용하여 원용부, 중간거리부 및 근용부 유효시야를 수직방향으로 1mm 단계로 분석하였다. 가입도 +2.00D를 기준으로 최대 비점수차량은 최소 -1.91D, 최대 -3.56D, 평균 -2.32±0.37D였고, 원용부 유효면적은 최소 9.17mm², 최대 91.25mm², 평균 30.57±17.20mm²였고, 중간거리부 유효면적은 최소 10.52mm², 최대 41.21mm², 평균 19.56±6.38mm²였고, 가입도 1.75D가 처음 나타나는 위치는 피팅기준점으로부터 최소 10.35mm, 최대18.16mm 평균 13.53±2.02mm였고, 피팅기준점으로 부터 21.5mm까지에서 가입도 +1.75D 이상의 근용부 유효면적은 최소 26.58mm², 최대 111.25mm², 평균 62.31±18.07mm²였다. 여러 가지 측정변수에 대하여 렌즈 사이에 큰 편차를 보였으며, 원용부와 중간거리부 그리고 근용부의 면적 및 수평방향의 폭을 기준으로 유용성의 서열을 측정할 수 있었다. 각 측정변수의 측정값을 기준으로 원용부, 중간거리부와 근용부의 평가점수를 산정하여 PAL의 착용자의 요구에 따른 평가를 하였다. 원용부에서는 I-1 99.6점과 K-1 76.6점으로 각각 높고, N-1 12.7점과 E-1 17.4점으로 낮게 측정되었고, 중간거리부에서는 F-3 82.0점과 B-2 81.4점으로 각각 shb고, D-4 19.9점과 N-1 25.5점으로 낮게 측정되었으며, 원용부와 근용부에서 비점수차 25%을 적용시 I-1 68.2점과 A-3 65.7점으로 높고, C-3 36.4점과 I-3 38.4점으로 낮게 측정되었다. 상관성 검사에서는 측정변수 상호간의 상관관계에서는 원용부 면적과 근용부 면적 사이에서 음의 상관성을 보였고(r=-0.551, p=0.001), 원용부 면적과 중간거리부 면적 사이에서는 상관성이 없었다(r=0.068, p=0.703). 원용부 면적과 최초가입도 위치 사이에는 높은 상관성을 보였다(r=0.605, p=0.000). 제조사에서 제시한 피팅기준점 높이와 원용부 폭 사이에서 유의한 상관성이 있었으며(r=0.344, p=0.013), 피팅기준점 높이와 면적 사이에서도 유의한 상관성이 있었다(r=0.337, p=0.015). 제조사에서 제시한 최소피팅높이와 원용부 면적 사이에서 유의한 상관성이 있었고(r=0.470, r=0.000), 중간거리부 면적 사이에서 유의한 상관성이 있었고(r=0.414, p=0.002), 가입도 +1.75D 최초 발견되는 거리 사이에서 유의한 상관성 있었고(r=0.542, p=0.000), 근용부 면적 사이에서 유의한 음의 상관성이 있었다(r=-0.377, p=0.004). 이상으로부터 누진가입도렌즈의 디자인에 따른 여러 가지 광학적 특성의 차이를 분석하고 원용부와 근용부 및 중간거리부의 유용성에 관한 서열화와 각각의 변수간 상관관계를 고려하여 임상에서 착용자의 시각적 요구에 적합한 디자인을 선택하고 조제하는데 유용하게 참고할 수 있는 자료를 제시한 것으로 사료된다.
By measuring optical characteristics and analysing distance, intermediate, and near zones of each PAL design, this study aims at providing eye care practitioners with guidelines in selection of lenses based on patients' visual needs. 34 lenses which are selling in the market currently, were ordered ...
By measuring optical characteristics and analysing distance, intermediate, and near zones of each PAL design, this study aims at providing eye care practitioners with guidelines in selection of lenses based on patients' visual needs. 34 lenses which are selling in the market currently, were ordered through a shop as if for a patient with a prescription of plano distance and a +2.00D add for right respectively. The total number of the lenses was 34 and they were obtained from the manufacturer directly to get a equatable of lenses. Each lens optics was measured with VM 2000(Visionix Ltd. Israel) three times. Limiting the viewing zone width by 0.50DC or +0.25DS, distance, intermediate, near viewing zone were analysed respectively by 1mm vertical steps. Setting the criterion at addition +2.00D, the maximum unwanted astigmatism was -1.95 to -3.56D(-2.32±0.37), distance viewing zone area was 9.17 to 91.25㎟ (30.57±17.20㎟), intermediate viewing zone area was 10.52 to 41.21㎟ (19.56±6.88㎟), the highest occurrence of the +1.75D was apart 10.35m to 18.16mm(13.53±2.02mm) from fitting cross, and near viewing zone area with over +1.75D was 26.58 to 111.25㎟(62.31± 18.07㎟). There were significant differences with measurement variables. And the usage ratings were tested on the criterion of the distance zone, intermediate zone, and near zone width and their horizontal width. After rating of the distance, intermediate, near viewing zone by the measurements, we rated the ratings according to the particular viewing needs of patients. I-1(99.6 point) and K-1(76.6 point) were rated high and N-1(12.7 point) and E-1(17.4 point) were rated low at the distance viewing zone and F-3(82.0 point) and B-2(81.4 point) were rated high and D-4(19.9 point) and N-1(25.5 point) were rated low at the intermediate viewing zone. With 25% astigmatism weighting at the distance and near viewing zone, I-1(68.2 point) and A-3(65.7 point) were rated high and C-3(36.4 point) and I-3(38.4 point) were rate low. There was a negative correlation between the distance and near viewing zone in terms of measurement variables(r=-0.551, p=0.001) but no correlation between the distance and intermediate viewing zone(r=0.068, p=0.703). There was a high correlation between width of the distance viewing zone and highest occurrence of addition(r=0.605, p=0.000). There was a significant correlation between fitting height recommended by the manufacturer and the width of distance viewing zone(r=0.344, p=0.013), and so was between height and width of fitting criterion(r=0.337, p=0.015). There were significant correlations between fitting height recommended by manufacturer and distance viewing zone(r=0.470, p=0.000), intermediate viewing zone(r=0.470, r=0.002) and highest occurrence of +1.75D(r=0.542, p=0.000) and negative correlation was found between the fitting height recommended by manufacturer and near viewing zone(r=0.377, p=0.000). In terms of usage ratings of the distance, intermediate, and near zone and correlation of variables, this study designed to provide eye care practitioners with guidelines so that they can select designs based on the particular viewing requirement of the patient.
By measuring optical characteristics and analysing distance, intermediate, and near zones of each PAL design, this study aims at providing eye care practitioners with guidelines in selection of lenses based on patients' visual needs. 34 lenses which are selling in the market currently, were ordered through a shop as if for a patient with a prescription of plano distance and a +2.00D add for right respectively. The total number of the lenses was 34 and they were obtained from the manufacturer directly to get a equatable of lenses. Each lens optics was measured with VM 2000(Visionix Ltd. Israel) three times. Limiting the viewing zone width by 0.50DC or +0.25DS, distance, intermediate, near viewing zone were analysed respectively by 1mm vertical steps. Setting the criterion at addition +2.00D, the maximum unwanted astigmatism was -1.95 to -3.56D(-2.32±0.37), distance viewing zone area was 9.17 to 91.25㎟ (30.57±17.20㎟), intermediate viewing zone area was 10.52 to 41.21㎟ (19.56±6.88㎟), the highest occurrence of the +1.75D was apart 10.35m to 18.16mm(13.53±2.02mm) from fitting cross, and near viewing zone area with over +1.75D was 26.58 to 111.25㎟(62.31± 18.07㎟). There were significant differences with measurement variables. And the usage ratings were tested on the criterion of the distance zone, intermediate zone, and near zone width and their horizontal width. After rating of the distance, intermediate, near viewing zone by the measurements, we rated the ratings according to the particular viewing needs of patients. I-1(99.6 point) and K-1(76.6 point) were rated high and N-1(12.7 point) and E-1(17.4 point) were rated low at the distance viewing zone and F-3(82.0 point) and B-2(81.4 point) were rated high and D-4(19.9 point) and N-1(25.5 point) were rated low at the intermediate viewing zone. With 25% astigmatism weighting at the distance and near viewing zone, I-1(68.2 point) and A-3(65.7 point) were rated high and C-3(36.4 point) and I-3(38.4 point) were rate low. There was a negative correlation between the distance and near viewing zone in terms of measurement variables(r=-0.551, p=0.001) but no correlation between the distance and intermediate viewing zone(r=0.068, p=0.703). There was a high correlation between width of the distance viewing zone and highest occurrence of addition(r=0.605, p=0.000). There was a significant correlation between fitting height recommended by the manufacturer and the width of distance viewing zone(r=0.344, p=0.013), and so was between height and width of fitting criterion(r=0.337, p=0.015). There were significant correlations between fitting height recommended by manufacturer and distance viewing zone(r=0.470, p=0.000), intermediate viewing zone(r=0.470, r=0.002) and highest occurrence of +1.75D(r=0.542, p=0.000) and negative correlation was found between the fitting height recommended by manufacturer and near viewing zone(r=0.377, p=0.000). In terms of usage ratings of the distance, intermediate, and near zone and correlation of variables, this study designed to provide eye care practitioners with guidelines so that they can select designs based on the particular viewing requirement of the patient.
주제어
#누진가입도렌즈 광학적 특성 피팅기준점 시각적 요구 노안 Progressive addition lenses Optical characteristics Fitting cross Visual needs Presbyopia
학위논문 정보
저자
진용갑
학위수여기관
을지대학교 보건대학원
학위구분
국내석사
학과
안경광학과
발행연도
2008
총페이지
viii, 77 p.
키워드
누진가입도렌즈 광학적 특성 피팅기준점 시각적 요구 노안 Progressive addition lenses Optical characteristics Fitting cross Visual needs Presbyopia
※ AI-Helper는 부적절한 답변을 할 수 있습니다.