Poly(lactic acid) 필름을 이용하여 연신 온도와 열처리 온도에 따른 구조와 물성의 변화를 검토하기 위해 WAXD, DSC, IR, 밀도, 복굴절률, DMA, 인장강도 등의 측정 실험을 통해 검토해본 결과 다음과 같은 결론을 얻었다. 연신온도에 따라 최대연신비가 각각 다른 ...
Poly(lactic acid) 필름을 이용하여 연신 온도와 열처리 온도에 따른 구조와 물성의 변화를 검토하기 위해 WAXD, DSC, IR, 밀도, 복굴절률, DMA, 인장강도 등의 측정 실험을 통해 검토해본 결과 다음과 같은 결론을 얻었다. 연신온도에 따라 최대연신비가 각각 다른 PLA 필름을 WAXD, DSC 분석에 의하여 α형 결정에서 β형 졀정으로의 전이를 확인하였다. IR을 통해서는 결정화의 진행을 확인하였으며, 밀도의 측정결과는 WAXD의 결과와 일치함을 확인하였다. 열처리 온도가 증가함에 따라 결정성은 크게 증가하지만 비결정영역의 배향이 나빠져 파단강도가 감소함을 인장강도, DMA, 복굴절 등의 측정을 통해 확인하였다.
Poly(lactic acid) 필름을 이용하여 연신 온도와 열처리 온도에 따른 구조와 물성의 변화를 검토하기 위해 WAXD, DSC, IR, 밀도, 복굴절률, DMA, 인장강도 등의 측정 실험을 통해 검토해본 결과 다음과 같은 결론을 얻었다. 연신온도에 따라 최대연신비가 각각 다른 PLA 필름을 WAXD, DSC 분석에 의하여 α형 결정에서 β형 졀정으로의 전이를 확인하였다. IR을 통해서는 결정화의 진행을 확인하였으며, 밀도의 측정결과는 WAXD의 결과와 일치함을 확인하였다. 열처리 온도가 증가함에 따라 결정성은 크게 증가하지만 비결정영역의 배향이 나빠져 파단강도가 감소함을 인장강도, DMA, 복굴절 등의 측정을 통해 확인하였다.
Poly(lactic acid)(PLA) films can be obtained by melt press method. In this experiment, PLA films were made by melting the NatureWorks LLC PLA 2002D chip(content 4.25%D-lactic acid) at 200℃ for 4min and the quenching. And then, PLA films obtained by melt press method were treated by various drawing t...
Poly(lactic acid)(PLA) films can be obtained by melt press method. In this experiment, PLA films were made by melting the NatureWorks LLC PLA 2002D chip(content 4.25%D-lactic acid) at 200℃ for 4min and the quenching. And then, PLA films obtained by melt press method were treated by various drawing temperature and annealing temperature. The crystalline phase and amorphous of PLA films were investigated with various techniques such as wide angle X-ray diffraction, DSC thermograms, FT-Infrared spectroscopy, density, birefringence, DMA etc.. The results are followed. According to the drawing temperature increased, the draw ratio and crystallinity increase. But, the higher temperature drawing, the birefringence and breaking stress decrease. Due to the annealing temperature, transition of crystal form α form crystal to β form crystal is appeared in crystal region. And amorphous molecular chain's orientation decrease.
Poly(lactic acid)(PLA) films can be obtained by melt press method. In this experiment, PLA films were made by melting the NatureWorks LLC PLA 2002D chip(content 4.25%D-lactic acid) at 200℃ for 4min and the quenching. And then, PLA films obtained by melt press method were treated by various drawing temperature and annealing temperature. The crystalline phase and amorphous of PLA films were investigated with various techniques such as wide angle X-ray diffraction, DSC thermograms, FT-Infrared spectroscopy, density, birefringence, DMA etc.. The results are followed. According to the drawing temperature increased, the draw ratio and crystallinity increase. But, the higher temperature drawing, the birefringence and breaking stress decrease. Due to the annealing temperature, transition of crystal form α form crystal to β form crystal is appeared in crystal region. And amorphous molecular chain's orientation decrease.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.