최근 측량법 개정(2003년 1월 1일)에 따라 우리나라의 측지기준계는 기존의 벳셀지역좌표계에서 세계측지좌표계로 변경되었고, 2010년부터 세계측지계의 전면도입을 앞두고 있다. 따라서 본 연구에서는 세계측지계 기준에 따라 효율적이고 정확하게 좌표변환하기 위한 방안을 도출하기 위하여 기존 1/1,000 수치지형도의 구축현황과 문제점을 파악하고, 좌표변환 파라미터 산출과 변환 성과의 정확도 평가 등을 수행하여 실용적인 좌표변환 방안을 제시하였다. 국가좌표변환계수에 의한 좌표변환 정확도를 분석하였으며, 연구대상지역의 국가기준점 및 도시기준점을 이용하여 지역좌표변환계수의 특성을 고찰하였다. 또한 항공삼각측량 성과를 이용한 1/1,000 수치지형도를 도시기준점을 이용한 측량성과와 비교하여 수치지형도 제작 당시 국가기준점의 편의량을 분석하고, 도시기준점을 이용하여 추정한 좌표변환계수를 사용하여 세계측지계로 좌표변환한 성과의 정확도를 분석하였다. 이러한 분석을 통해서 추정된 파라미터를 이용한 좌표변환 수행시 x축에 6.0mm, ...
최근 측량법 개정(2003년 1월 1일)에 따라 우리나라의 측지기준계는 기존의 벳셀지역좌표계에서 세계측지좌표계로 변경되었고, 2010년부터 세계측지계의 전면도입을 앞두고 있다. 따라서 본 연구에서는 세계측지계 기준에 따라 효율적이고 정확하게 좌표변환하기 위한 방안을 도출하기 위하여 기존 1/1,000 수치지형도의 구축현황과 문제점을 파악하고, 좌표변환 파라미터 산출과 변환 성과의 정확도 평가 등을 수행하여 실용적인 좌표변환 방안을 제시하였다. 국가좌표변환계수에 의한 좌표변환 정확도를 분석하였으며, 연구대상지역의 국가기준점 및 도시기준점을 이용하여 지역좌표변환계수의 특성을 고찰하였다. 또한 항공삼각측량 성과를 이용한 1/1,000 수치지형도를 도시기준점을 이용한 측량성과와 비교하여 수치지형도 제작 당시 국가기준점의 편의량을 분석하고, 도시기준점을 이용하여 추정한 좌표변환계수를 사용하여 세계측지계로 좌표변환한 성과의 정확도를 분석하였다. 이러한 분석을 통해서 추정된 파라미터를 이용한 좌표변환 수행시 x축에 6.0mm, y축에 5.9mm로 공공측량작업규정인 1/1,000 수치지도의 오차범위 이내로 들어옴으로 만족스러운 좌표변환 성과를 산출하였다. 또한 세계측지계 변환에 필요한 공통점의 적절한 수량을 제시하였다.
최근 측량법 개정(2003년 1월 1일)에 따라 우리나라의 측지기준계는 기존의 벳셀지역좌표계에서 세계측지좌표계로 변경되었고, 2010년부터 세계측지계의 전면도입을 앞두고 있다. 따라서 본 연구에서는 세계측지계 기준에 따라 효율적이고 정확하게 좌표변환하기 위한 방안을 도출하기 위하여 기존 1/1,000 수치지형도의 구축현황과 문제점을 파악하고, 좌표변환 파라미터 산출과 변환 성과의 정확도 평가 등을 수행하여 실용적인 좌표변환 방안을 제시하였다. 국가좌표변환계수에 의한 좌표변환 정확도를 분석하였으며, 연구대상지역의 국가기준점 및 도시기준점을 이용하여 지역좌표변환계수의 특성을 고찰하였다. 또한 항공삼각측량 성과를 이용한 1/1,000 수치지형도를 도시기준점을 이용한 측량성과와 비교하여 수치지형도 제작 당시 국가기준점의 편의량을 분석하고, 도시기준점을 이용하여 추정한 좌표변환계수를 사용하여 세계측지계로 좌표변환한 성과의 정확도를 분석하였다. 이러한 분석을 통해서 추정된 파라미터를 이용한 좌표변환 수행시 x축에 6.0mm, y축에 5.9mm로 공공측량작업규정인 1/1,000 수치지도의 오차범위 이내로 들어옴으로 만족스러운 좌표변환 성과를 산출하였다. 또한 세계측지계 변환에 필요한 공통점의 적절한 수량을 제시하였다.
According to a recent Survey Act revision on Jan. 1, 2003, Korean Geodetic Datum is changed from Bessel Coordinate System to World Geodetic Datum, and the conversion from the old to the new datum will complete in 2010. This study aims to derive a practical coordinate transformation method. After ana...
According to a recent Survey Act revision on Jan. 1, 2003, Korean Geodetic Datum is changed from Bessel Coordinate System to World Geodetic Datum, and the conversion from the old to the new datum will complete in 2010. This study aims to derive a practical coordinate transformation method. After analyzing the status and problems of existing 1/1,000 digital map, the transformation parameters are estimated and the accuracy of the transformation is determined based on the transformed coordinates. We analyzed the accuracy of a transformation using the published national transformation coefficients as well as the estimated local transformation coefficients using national and urban control points. In addition, the 1/1,000 digital base map from aerial triangulation is compared with respect to the coordinates of urban control points. Based on the comparison, the biases on the national control points which were used at the time of digital map generation was analyzed. Then, the accuracy of transformed coordinates based on the world geodetic system using local transformation coefficients estimated from urban control points are determined. As a result of estimation, RMSE of the transformation were 6.0mm in x-axis, 5.9mm in y-axis. Since all these values are better than the permissible error range of an 1/1,000, it is considered that the transformations are successfully performed. Also, we present to optimal number of common control points for coordinate conversion.
According to a recent Survey Act revision on Jan. 1, 2003, Korean Geodetic Datum is changed from Bessel Coordinate System to World Geodetic Datum, and the conversion from the old to the new datum will complete in 2010. This study aims to derive a practical coordinate transformation method. After analyzing the status and problems of existing 1/1,000 digital map, the transformation parameters are estimated and the accuracy of the transformation is determined based on the transformed coordinates. We analyzed the accuracy of a transformation using the published national transformation coefficients as well as the estimated local transformation coefficients using national and urban control points. In addition, the 1/1,000 digital base map from aerial triangulation is compared with respect to the coordinates of urban control points. Based on the comparison, the biases on the national control points which were used at the time of digital map generation was analyzed. Then, the accuracy of transformed coordinates based on the world geodetic system using local transformation coefficients estimated from urban control points are determined. As a result of estimation, RMSE of the transformation were 6.0mm in x-axis, 5.9mm in y-axis. Since all these values are better than the permissible error range of an 1/1,000, it is considered that the transformations are successfully performed. Also, we present to optimal number of common control points for coordinate conversion.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.