화학환원법에 의해 제조한 은 나노 용액과 유리기재위에 코팅하기 위해 제조한 은 나노 코팅 용액 모두 항균 효과를 나타냄을 알 수 있었다. 제 1 절 Ag 나노 졸의 제조 및 항균효과 1. 출발물질로 AgNO₃, 환원제로 NaBH4, 안정화제로 SDS를 사용하여 화학환원법으로 은 나노 졸을 제조할 수 있었다. 이때 출발물질인 AgNO₃의 농도가 낮은 경우 나노졸은 항균효과를 잘 나타내지 못했으며 또한 농도가 과량인 경우 용액이 침전이 되어 항균효과를 잘 나타내지 못했다. ...
화학환원법에 의해 제조한 은 나노 용액과 유리기재위에 코팅하기 위해 제조한 은 나노 코팅 용액 모두 항균 효과를 나타냄을 알 수 있었다. 제 1 절 Ag 나노 졸의 제조 및 항균효과 1. 출발물질로 AgNO₃, 환원제로 NaBH4, 안정화제로 SDS를 사용하여 화학환원법으로 은 나노 졸을 제조할 수 있었다. 이때 출발물질인 AgNO₃의 농도가 낮은 경우 나노졸은 항균효과를 잘 나타내지 못했으며 또한 농도가 과량인 경우 용액이 침전이 되어 항균효과를 잘 나타내지 못했다. 항균성을 나타내기 위한 AgNO₃의 농도는 0.002 M이 가장 최적이라 할 수 있다. 2. 안정화제인 SDS의 양이 적을 때에는 용액은 불투명하고 침전을 보이게 되며, 점점 SDS의 양이 증가함에 따라서 용액의 상태는 투명해지며 침전을 일으키지 않게 되었다. 이는 안정화제인 SDS가 용액 내에서 생성된 금속 입자 핵의 표면에 흡착하여 핵끼리의 융합을 막아 성장을 억제하기 때문으로 판단된다. 3. 환원제인 NaBH4를 첨가하지 않았을 때에는, Ag+가 환원이 되지 않아 용액은 투명하며 Ag 나노 용액을 제조할 수 없었다. 또한 환원제를 과량으로 첨가하였을 경우에도 용액은 침전을 일으켰다. Ag 나노입자들이 용액 내에서 잘 분산된 경우 UV-vis 흡광도 peak가 폭이 좁게 나타났으며 항균효과도 우수하였다. 그러나 생성된 Ag 입자들이 용액 내에서 응집이 일어난 경우 UV-vis 흡광도 peak의 폭이 넓어졌으며, 항균효과는 우수하지 못했다. 제 2 절 Ag가 도포된 유-무기 하이브리드 코팅 막의 제조 및 항균효과 1. AgNO₃를 실란커플링제인 MPTMS와 VTES의 혼합용액에 첨가하여 제조된 용액을 유리 기판 위에 코팅한 후 150oC에서 열처리하여 Ag가 도포된 유-무기 하이브리드 코팅 막을 제조하였다. 2. AgNO₃의 농도가 0.01 M의 조건으로 제조된 코팅 막은 거의 Ag 콜로이드를 생성시키지 못했으나, AgNO₃의 농도가 증가될수록 Ag 콜로이드가 더 많이 생성되었다. Ag 콜로이드의 크기는 0.1 M인 경우에는 20-40 nm, 0.2 M인 경우에 30-50 nm, 0.5 M인 경우에 40-60 nm로 AgNO₃의 농도가 증가할수록 Ag 콜로이드의 크기가 증가하는 경향을 보였다. 3. AgNO₃의 농도가 0.1 M 조건에서, 실란커플링제를 MPTMS와 VTES의 혼합물 상태로 제조한 용액을 유리타일 위에 코팅했을 때 그람 양성균Staphylococcus aureus (S. aureus)과 그람 음성균Escherichia coli (E. coli)에서 모두 항균효과를 보였으며, 연필경도 6H↑, 부착성 5B의 우수한 물성을 나타내었다. 따라서 본 연구에서 제조한 은 나노 용액과 은나노 코팅 용액 모두 항균 효과를 나타냈으므로 미생물 관리가 시급한 곳에서나 다양한 분야에 적용이 가능할 것으로 판단되다.
화학환원법에 의해 제조한 은 나노 용액과 유리기재위에 코팅하기 위해 제조한 은 나노 코팅 용액 모두 항균 효과를 나타냄을 알 수 있었다. 제 1 절 Ag 나노 졸의 제조 및 항균효과 1. 출발물질로 AgNO₃, 환원제로 NaBH4, 안정화제로 SDS를 사용하여 화학환원법으로 은 나노 졸을 제조할 수 있었다. 이때 출발물질인 AgNO₃의 농도가 낮은 경우 나노졸은 항균효과를 잘 나타내지 못했으며 또한 농도가 과량인 경우 용액이 침전이 되어 항균효과를 잘 나타내지 못했다. 항균성을 나타내기 위한 AgNO₃의 농도는 0.002 M이 가장 최적이라 할 수 있다. 2. 안정화제인 SDS의 양이 적을 때에는 용액은 불투명하고 침전을 보이게 되며, 점점 SDS의 양이 증가함에 따라서 용액의 상태는 투명해지며 침전을 일으키지 않게 되었다. 이는 안정화제인 SDS가 용액 내에서 생성된 금속 입자 핵의 표면에 흡착하여 핵끼리의 융합을 막아 성장을 억제하기 때문으로 판단된다. 3. 환원제인 NaBH4를 첨가하지 않았을 때에는, Ag+가 환원이 되지 않아 용액은 투명하며 Ag 나노 용액을 제조할 수 없었다. 또한 환원제를 과량으로 첨가하였을 경우에도 용액은 침전을 일으켰다. Ag 나노입자들이 용액 내에서 잘 분산된 경우 UV-vis 흡광도 peak가 폭이 좁게 나타났으며 항균효과도 우수하였다. 그러나 생성된 Ag 입자들이 용액 내에서 응집이 일어난 경우 UV-vis 흡광도 peak의 폭이 넓어졌으며, 항균효과는 우수하지 못했다. 제 2 절 Ag가 도포된 유-무기 하이브리드 코팅 막의 제조 및 항균효과 1. AgNO₃를 실란커플링제인 MPTMS와 VTES의 혼합용액에 첨가하여 제조된 용액을 유리 기판 위에 코팅한 후 150oC에서 열처리하여 Ag가 도포된 유-무기 하이브리드 코팅 막을 제조하였다. 2. AgNO₃의 농도가 0.01 M의 조건으로 제조된 코팅 막은 거의 Ag 콜로이드를 생성시키지 못했으나, AgNO₃의 농도가 증가될수록 Ag 콜로이드가 더 많이 생성되었다. Ag 콜로이드의 크기는 0.1 M인 경우에는 20-40 nm, 0.2 M인 경우에 30-50 nm, 0.5 M인 경우에 40-60 nm로 AgNO₃의 농도가 증가할수록 Ag 콜로이드의 크기가 증가하는 경향을 보였다. 3. AgNO₃의 농도가 0.1 M 조건에서, 실란커플링제를 MPTMS와 VTES의 혼합물 상태로 제조한 용액을 유리타일 위에 코팅했을 때 그람 양성균Staphylococcus aureus (S. aureus)과 그람 음성균 Escherichia coli (E. coli)에서 모두 항균효과를 보였으며, 연필경도 6H↑, 부착성 5B의 우수한 물성을 나타내었다. 따라서 본 연구에서 제조한 은 나노 용액과 은나노 코팅 용액 모두 항균 효과를 나타냈으므로 미생물 관리가 시급한 곳에서나 다양한 분야에 적용이 가능할 것으로 판단되다.
The silver nanoparticles were obtained by chemical reduction of silver nitrate in water with sodium borohydride (NaBH4) in the presence of SDS (sodium dodecyl sulfate) as a stabilizer. The synthesized silver nanoparticles were characterized by UV-vis spectroscopy (UV-vis) and transmission electron m...
The silver nanoparticles were obtained by chemical reduction of silver nitrate in water with sodium borohydride (NaBH4) in the presence of SDS (sodium dodecyl sulfate) as a stabilizer. The synthesized silver nanoparticles were characterized by UV-vis spectroscopy (UV-vis) and transmission electron microscopy (TEM). The formation of silver nanoparticles was confirmed from the appearance of surface plasmon absorption maxima at 400 nm by UV-vis. TEM showed the spherical nanoparticles with size in 10-20 nm. The antibacterial activity of silver nanoparticles was tested using Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coil (E. coli). The silver nanoparticles, whose bacterial activity was dependent on the aggregation degree between particles, exhibited bacterial activity against S. aureus and E. coli. Silver-doped organic-inorganic hybrid coating solutions were prepared by incorporating AgNO₃ into organic-inorganic hybrid sols derived from methacryloxypropyl trimethoxysilane(MEMO) and vinyltriethoxysilane(VTES) using the sol-gel method. They were applied on the soda-lime slide glass, and crack-free and transparent coatings were obtained by a low temperature heat treatment at 150℃ for 3 h. The formation of Ag colloids in the coating films was confirmed by UV-Vis spectroscopy and scanning electron microscopy. The size control of Ag colloids in the coating films was possible by adjusting initial AgNO₃ concentrations in the coating solutions. The antibacterial activity of the coating films was tested against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria by film contact method. The coating films exhibited an excellent bacterial activity against both S. aureus and E. coli.
The silver nanoparticles were obtained by chemical reduction of silver nitrate in water with sodium borohydride (NaBH4) in the presence of SDS (sodium dodecyl sulfate) as a stabilizer. The synthesized silver nanoparticles were characterized by UV-vis spectroscopy (UV-vis) and transmission electron microscopy (TEM). The formation of silver nanoparticles was confirmed from the appearance of surface plasmon absorption maxima at 400 nm by UV-vis. TEM showed the spherical nanoparticles with size in 10-20 nm. The antibacterial activity of silver nanoparticles was tested using Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coil (E. coli). The silver nanoparticles, whose bacterial activity was dependent on the aggregation degree between particles, exhibited bacterial activity against S. aureus and E. coli. Silver-doped organic-inorganic hybrid coating solutions were prepared by incorporating AgNO₃ into organic-inorganic hybrid sols derived from methacryloxypropyl trimethoxysilane(MEMO) and vinyltriethoxysilane(VTES) using the sol-gel method. They were applied on the soda-lime slide glass, and crack-free and transparent coatings were obtained by a low temperature heat treatment at 150℃ for 3 h. The formation of Ag colloids in the coating films was confirmed by UV-Vis spectroscopy and scanning electron microscopy. The size control of Ag colloids in the coating films was possible by adjusting initial AgNO₃ concentrations in the coating solutions. The antibacterial activity of the coating films was tested against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria by film contact method. The coating films exhibited an excellent bacterial activity against both S. aureus and E. coli.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.