보안등은 야간 보안을 담당하는 중요 전기 설비로서, 차량도로의 조명을 목적으로 하는 가로등과는 달리 도로 폭이 12m 이하인 장소의 주택가에 설치되어 주로 야간 보행자의 안전 및 범죄 방지에 일조하고 있다. 최초의 보안등의 점멸기는 직접 스위치를 올리고 내리는 스위치 방식으로 만들어졌으며, 그 후 조도 방식의 보안등, 전자 타이머방식 보안등으로 변천을 하여 왔다. 최근에는 GPS를 이용한 보안등이 일부 사용되고 있지만, 현재 가장 널리 보급 되어 있는 것은 전자 타이머 방식의 보안등 점멸기이다. 앞서 설명한 보안등의 변천과 더불어 보안등을 끄고 켜는 시간은 비교적 정확해 졌지만, 그 어떤 방식도 유지 보수에 관련된 기능을 가지고 있지 않다. 즉 고장이 나고, 민원인에 의해서 신고가 이루어 져야 비로소 고장 인지가 가능하다. IT기반의 무선 양방향 보안등 시스템 구축의 주목적은 ...
보안등은 야간 보안을 담당하는 중요 전기 설비로서, 차량도로의 조명을 목적으로 하는 가로등과는 달리 도로 폭이 12m 이하인 장소의 주택가에 설치되어 주로 야간 보행자의 안전 및 범죄 방지에 일조하고 있다. 최초의 보안등의 점멸기는 직접 스위치를 올리고 내리는 스위치 방식으로 만들어졌으며, 그 후 조도 방식의 보안등, 전자 타이머방식 보안등으로 변천을 하여 왔다. 최근에는 GPS를 이용한 보안등이 일부 사용되고 있지만, 현재 가장 널리 보급 되어 있는 것은 전자 타이머 방식의 보안등 점멸기이다. 앞서 설명한 보안등의 변천과 더불어 보안등을 끄고 켜는 시간은 비교적 정확해 졌지만, 그 어떤 방식도 유지 보수에 관련된 기능을 가지고 있지 않다. 즉 고장이 나고, 민원인에 의해서 신고가 이루어 져야 비로소 고장 인지가 가능하다. IT기반의 무선 양방향 보안등 시스템 구축의 주목적은 도심 지역의 보안등 유지보수를 보다 편리하게 하고, 각종 상황에 능동적으로 빠른 시간에 대처하며, 지역민의 민원 해소와 더불어 누전 등의 각종 고장 등으로 인한 인사 피해를 사전에 줄이는데 그 주목적이 있다. 보안등 점멸기를 원격지에서 효율적으로 관제하기 위해서는 무선 통신 기술의 도입이 반드시 필요하다. 그런데 무선 자원의 특성상 통신 거리에 제약이 있으며, 특히 보안등이 설치되는 도심 지역에서는 주택, 건물 등으로 인해 물리적으로 RF 신호가 전달되는데 많은 제약을 받기 때문에 넓은 지역에 설치되어 있는 보안등 단말들이 서로 통신을 하기 위해서는 다중 홉 (멀티 홉) 통신 기술이 필요하다. 본 연구에서는 센서 네트워크의 기술을 응용하여, 소수의 중계기를 게이트웨이로 하고 다수의 보안등 단말들이 다중 홉 통신을 통하여 중계기로 데이터를 전송할 수 있는 시스템을 구성하였다. 이를 가능하게 하기 위해 보안등 설치 환경에 적합한 센서 네트워크용 MAC 및 라우팅 프로토콜을 제안하고 구현하였다. 특히 본 연구에서는 무선 보안등 시스템을 H/W 레벨에서부터 설계하고 제작하였으며, 이를 구동하기 위한 S/W의 구현에 이르기까지 전체 시스템에 관한 모든 것을 구현한 것으로 국가 IT 산업 발전에 큰 기여를 할 수 있을 것으로 예상된다. 또한 본 시스템은 향후 도심형 GIS와 연동이 되어 각 지자체에 시행중인 도심 설치 구조물 GIS구축사업과 확장 되어 나갈 수 있으며, 또한 다가오는 U-City 구축의 초석으로 통신 네트워크를 구축함으로 치안관련, 미아방지, 독거노인 등 U-City 시대에 요구 되어 지는 통신망 인프라에 적극적으로 대응 할 수 있을 것으로 예상된다.
보안등은 야간 보안을 담당하는 중요 전기 설비로서, 차량도로의 조명을 목적으로 하는 가로등과는 달리 도로 폭이 12m 이하인 장소의 주택가에 설치되어 주로 야간 보행자의 안전 및 범죄 방지에 일조하고 있다. 최초의 보안등의 점멸기는 직접 스위치를 올리고 내리는 스위치 방식으로 만들어졌으며, 그 후 조도 방식의 보안등, 전자 타이머방식 보안등으로 변천을 하여 왔다. 최근에는 GPS를 이용한 보안등이 일부 사용되고 있지만, 현재 가장 널리 보급 되어 있는 것은 전자 타이머 방식의 보안등 점멸기이다. 앞서 설명한 보안등의 변천과 더불어 보안등을 끄고 켜는 시간은 비교적 정확해 졌지만, 그 어떤 방식도 유지 보수에 관련된 기능을 가지고 있지 않다. 즉 고장이 나고, 민원인에 의해서 신고가 이루어 져야 비로소 고장 인지가 가능하다. IT기반의 무선 양방향 보안등 시스템 구축의 주목적은 도심 지역의 보안등 유지보수를 보다 편리하게 하고, 각종 상황에 능동적으로 빠른 시간에 대처하며, 지역민의 민원 해소와 더불어 누전 등의 각종 고장 등으로 인한 인사 피해를 사전에 줄이는데 그 주목적이 있다. 보안등 점멸기를 원격지에서 효율적으로 관제하기 위해서는 무선 통신 기술의 도입이 반드시 필요하다. 그런데 무선 자원의 특성상 통신 거리에 제약이 있으며, 특히 보안등이 설치되는 도심 지역에서는 주택, 건물 등으로 인해 물리적으로 RF 신호가 전달되는데 많은 제약을 받기 때문에 넓은 지역에 설치되어 있는 보안등 단말들이 서로 통신을 하기 위해서는 다중 홉 (멀티 홉) 통신 기술이 필요하다. 본 연구에서는 센서 네트워크의 기술을 응용하여, 소수의 중계기를 게이트웨이로 하고 다수의 보안등 단말들이 다중 홉 통신을 통하여 중계기로 데이터를 전송할 수 있는 시스템을 구성하였다. 이를 가능하게 하기 위해 보안등 설치 환경에 적합한 센서 네트워크용 MAC 및 라우팅 프로토콜을 제안하고 구현하였다. 특히 본 연구에서는 무선 보안등 시스템을 H/W 레벨에서부터 설계하고 제작하였으며, 이를 구동하기 위한 S/W의 구현에 이르기까지 전체 시스템에 관한 모든 것을 구현한 것으로 국가 IT 산업 발전에 큰 기여를 할 수 있을 것으로 예상된다. 또한 본 시스템은 향후 도심형 GIS와 연동이 되어 각 지자체에 시행중인 도심 설치 구조물 GIS구축사업과 확장 되어 나갈 수 있으며, 또한 다가오는 U-City 구축의 초석으로 통신 네트워크를 구축함으로 치안관련, 미아방지, 독거노인 등 U-City 시대에 요구 되어 지는 통신망 인프라에 적극적으로 대응 할 수 있을 것으로 예상된다.
Guard lights known as important electric facilities for security purposes at night, which is differ from street lights for road lightings, are usually installed on streets of less than 12m width in residential area for pedestrian's safety and crime prevention. At very first days, guard light switch ...
Guard lights known as important electric facilities for security purposes at night, which is differ from street lights for road lightings, are usually installed on streets of less than 12m width in residential area for pedestrian's safety and crime prevention. At very first days, guard light switch was manufactured in a form of direct positioning, and then an illuminometer type light and electronic timer type, etc were used through the changes of times. Although some guard lights utilizing GPS are used recently, most popular ones are still electronic timer type guard lights. As for the on/off time of the light through its change of the time, it became quite accurate while no method of above had a function of maintenance or repair. That is, report of malfunction was the only way of recognition of the trouble. The main purpose of establishment of IT-based guard light system with bi-directional control is to facilitate the maintenance and repair of guard lights in the city and to deal with various situations rapidly and actively. This will also help reducing damages from many different types of defects like electric leakage and solve public demands or complaints in advance. An induction of wireless communication technology is crucial to remote control of guard light switch efficiently. However, due to the property of wireless resources, there are limitations of communication distances. As downtown area has many limitations of transmitting and receiving RF signals due to high buildings, Multi-Hop technique is necessary in order to communicate between guard light terminals spread out in a wide area. This research work made up a system that can transmit the data with multi-hop communication system of large number of guard light terminals and small number of repeaters as gateway by applying the sensor network technique. To accomplish this, proper sensor network MAC and routing protocol suitable to the installing environments were proposed and implemented. Particularly, the wireless guard light system was designed, and was implemented from its hardware level. And the total system including the driving software implementation was expected a great contribution to nation's IT industry. Furthermore, the system can be coupled with urban-city type GIS in the future, which can be extended with the project of constructing GIS structures in downtown by each commune government. And as a basis of upcoming U-city establishment, this study can actively correspond the demanding communication networks such as; residence security, prevention of missing child, the aged solitudes, etc.
Guard lights known as important electric facilities for security purposes at night, which is differ from street lights for road lightings, are usually installed on streets of less than 12m width in residential area for pedestrian's safety and crime prevention. At very first days, guard light switch was manufactured in a form of direct positioning, and then an illuminometer type light and electronic timer type, etc were used through the changes of times. Although some guard lights utilizing GPS are used recently, most popular ones are still electronic timer type guard lights. As for the on/off time of the light through its change of the time, it became quite accurate while no method of above had a function of maintenance or repair. That is, report of malfunction was the only way of recognition of the trouble. The main purpose of establishment of IT-based guard light system with bi-directional control is to facilitate the maintenance and repair of guard lights in the city and to deal with various situations rapidly and actively. This will also help reducing damages from many different types of defects like electric leakage and solve public demands or complaints in advance. An induction of wireless communication technology is crucial to remote control of guard light switch efficiently. However, due to the property of wireless resources, there are limitations of communication distances. As downtown area has many limitations of transmitting and receiving RF signals due to high buildings, Multi-Hop technique is necessary in order to communicate between guard light terminals spread out in a wide area. This research work made up a system that can transmit the data with multi-hop communication system of large number of guard light terminals and small number of repeaters as gateway by applying the sensor network technique. To accomplish this, proper sensor network MAC and routing protocol suitable to the installing environments were proposed and implemented. Particularly, the wireless guard light system was designed, and was implemented from its hardware level. And the total system including the driving software implementation was expected a great contribution to nation's IT industry. Furthermore, the system can be coupled with urban-city type GIS in the future, which can be extended with the project of constructing GIS structures in downtown by each commune government. And as a basis of upcoming U-city establishment, this study can actively correspond the demanding communication networks such as; residence security, prevention of missing child, the aged solitudes, etc.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.