마이크로 니들의 제작에 있어서 현재 여러 제조 방법이 제안되고 있으며, 인체나 생물 체내에 약물 전달, DNA와 같은 체내의 물질을 검출 분석하는 용도로 많이 사용된다. 일반적으로 마이크로 니들의 경도를 높이기 위하여 표면에 니켈과 같은 금속도금을 한다.
본 논문에서는 니들의 경도를 높이고 가공적인 방법으로 중공형 마이크로 니들을 제작하기 위하여 micro-EDM공정을 이용하여 WC재질의 니들에 홀 가공을 진행한다. 중공형 마이크로 니들을 가공하기 위하여 우선 니들의 각도를 조절하여 니들과 전극을 정렬할 수 있는 니들 고정 장치를 설계하였다. 마이크로 단위의 니들은 매우 작기 때문에 디지털 ...
마이크로 니들의 제작에 있어서 현재 여러 제조 방법이 제안되고 있으며, 인체나 생물 체내에 약물 전달, DNA와 같은 체내의 물질을 검출 분석하는 용도로 많이 사용된다. 일반적으로 마이크로 니들의 경도를 높이기 위하여 표면에 니켈과 같은 금속도금을 한다.
본 논문에서는 니들의 경도를 높이고 가공적인 방법으로 중공형 마이크로 니들을 제작하기 위하여 micro-EDM공정을 이용하여 WC재질의 니들에 홀 가공을 진행한다. 중공형 마이크로 니들을 가공하기 위하여 우선 니들의 각도를 조절하여 니들과 전극을 정렬할 수 있는 니들 고정 장치를 설계하였다. 마이크로 단위의 니들은 매우 작기 때문에 디지털 광학현미경을 이용하여 니들과 전극의 정렬상태를 관측 및 조절하였다. 높은 세장비의 니들을 제작하기 위하여 1차 가공을 일정한 시간 진행한 후 1차가공 때 보다 지름이 15μm작은 전극으로 2차 가공을 진행하며, 니들을 뒤집어서 3차 가공을 하는 방법을 이용하였다. 1차가공만 지속적으로 가공하는 것보다 일정한 시간 동안 1차 가공 후 2차 가공을 하는 것이 가공에 유리하다는 결과를 얻었다. 그리하여 지름이 1차 가공 시에는 105μm, 2차 가공 시에는 90μm, 3차 가공 시에는 105μm인 전극으로 가공을 진행하여 길이가 2300μm이고 구멍 지름이 130μm인 WC재질의 중공형 마이크로 니들을 제작하였다.
마이크로 니들의 제작에 있어서 현재 여러 제조 방법이 제안되고 있으며, 인체나 생물 체내에 약물 전달, DNA와 같은 체내의 물질을 검출 분석하는 용도로 많이 사용된다. 일반적으로 마이크로 니들의 경도를 높이기 위하여 표면에 니켈과 같은 금속도금을 한다.
본 논문에서는 니들의 경도를 높이고 가공적인 방법으로 중공형 마이크로 니들을 제작하기 위하여 micro-EDM공정을 이용하여 WC재질의 니들에 홀 가공을 진행한다. 중공형 마이크로 니들을 가공하기 위하여 우선 니들의 각도를 조절하여 니들과 전극을 정렬할 수 있는 니들 고정 장치를 설계하였다. 마이크로 단위의 니들은 매우 작기 때문에 디지털 광학현미경을 이용하여 니들과 전극의 정렬상태를 관측 및 조절하였다. 높은 세장비의 니들을 제작하기 위하여 1차 가공을 일정한 시간 진행한 후 1차가공 때 보다 지름이 15μm작은 전극으로 2차 가공을 진행하며, 니들을 뒤집어서 3차 가공을 하는 방법을 이용하였다. 1차가공만 지속적으로 가공하는 것보다 일정한 시간 동안 1차 가공 후 2차 가공을 하는 것이 가공에 유리하다는 결과를 얻었다. 그리하여 지름이 1차 가공 시에는 105μm, 2차 가공 시에는 90μm, 3차 가공 시에는 105μm인 전극으로 가공을 진행하여 길이가 2300μm이고 구멍 지름이 130μm인 WC재질의 중공형 마이크로 니들을 제작하였다.
There are several manufacturing methods are proposed for producing micro-needle. It is used as transferring device for medicaments and sampling the tiny constitute substances from biological body like DNA. For the purpose of improving the rigidity of micro needle, normally the nickel is used as coat...
There are several manufacturing methods are proposed for producing micro-needle. It is used as transferring device for medicaments and sampling the tiny constitute substances from biological body like DNA. For the purpose of improving the rigidity of micro needle, normally the nickel is used as coating metal.
In this study, for improving the rigidity of the micro-needle and using the machining method to process hollow type micro-needle, the micro-EMD processing method is proposed to produce micro needle which is WC material. Before machining, the mechanism of needle fixing device must be designed first. It will adjust the needle’s posture and let it aligned parallel with electrode. Observing the alignment of the micro scaled needle the optical microscope is employed.
In order to process high aspect ratio micro-needle, first step, the electrode which diameter is 105μm was implemented at processing, after a certain amount of time the 15μm smaller electrode were installed to instead which was used at previous step. Finally, Flip the needle and proceed from the opposite direction of needle. By the above process, the result got from the proposed process has more advantage than the one which was only used the 105μm diameter’s electrode through the whole process. Consequently, it used diameter of 105μm, 90μm, 105μm electrodes corresponding to each processing step. Through these process we could get WC material micro-needle which length is 2300μm with diameter of 130μm.
There are several manufacturing methods are proposed for producing micro-needle. It is used as transferring device for medicaments and sampling the tiny constitute substances from biological body like DNA. For the purpose of improving the rigidity of micro needle, normally the nickel is used as coating metal.
In this study, for improving the rigidity of the micro-needle and using the machining method to process hollow type micro-needle, the micro-EMD processing method is proposed to produce micro needle which is WC material. Before machining, the mechanism of needle fixing device must be designed first. It will adjust the needle’s posture and let it aligned parallel with electrode. Observing the alignment of the micro scaled needle the optical microscope is employed.
In order to process high aspect ratio micro-needle, first step, the electrode which diameter is 105μm was implemented at processing, after a certain amount of time the 15μm smaller electrode were installed to instead which was used at previous step. Finally, Flip the needle and proceed from the opposite direction of needle. By the above process, the result got from the proposed process has more advantage than the one which was only used the 105μm diameter’s electrode through the whole process. Consequently, it used diameter of 105μm, 90μm, 105μm electrodes corresponding to each processing step. Through these process we could get WC material micro-needle which length is 2300μm with diameter of 130μm.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.