인은 수계(水界)에 부영양화 현상을 일으키는 주요 인자로서 하수중의 인은 주로 인축척미생물(PAOs:Phosphorous Accumulating Organisms)의 과잉섭취(uptake)에 통해 제거 된다. 본 연구에서는 인(P)을 처리하는 하수처리공정을 제어하는데 있다. 이를 위해 본 연구에서는 하수처리장의 유입수질에 따라 인의 성상을 조사하고, 생물학적 처리를 통한 인처리의 최적운전 제어인자를 도출 하여 목표수질 0.2mg/L이하 운전방안을 제시 하였으며, 추가로 후단부에 화학적 처리방법을 도입하여 최종방류수질을 0.05mg/L이하로 유지하는 제어방안을 제시하였다. 우선 BNR공정의 혐기조에 외부탄소원으로서 ...
인은 수계(水界)에 부영양화 현상을 일으키는 주요 인자로서 하수중의 인은 주로 인축척미생물(PAOs:Phosphorous Accumulating Organisms)의 과잉섭취(uptake)에 통해 제거 된다. 본 연구에서는 인(P)을 처리하는 하수처리공정을 제어하는데 있다. 이를 위해 본 연구에서는 하수처리장의 유입수질에 따라 인의 성상을 조사하고, 생물학적 처리를 통한 인처리의 최적운전 제어인자를 도출 하여 목표수질 0.2mg/L이하 운전방안을 제시 하였으며, 추가로 후단부에 화학적 처리방법을 도입하여 최종방류수질을 0.05mg/L이하로 유지하는 제어방안을 제시하였다. 우선 BNR공정의 혐기조에 외부탄소원으로서 아세트산을 첨가하여 운영할 경우, 유입수 TP가 최대 97.5%까지 제거되었으며, 후단부 화학응집제 투입시 응집효율을 감소시키고 화학응집제로 제거하기 어려운 유기인(Org-P)도 95.8%까지 제거하여 총인(TP:Total Phosphorous)처리효율을 향상 시켰다. BNR공정의 in-line상에서 외부탄소원(External carbon source)의 투입농도를 결정하는 제어인자로 1차침전지 유출수에 OUR측정장치를 설치하여 유용한 기질인 RBDSCOD를 실시간 측정하여 PAOs미생물이 혐기조에서 P-release가 원할히 일어날 수 있도록 하였으며, 적정 RBDSCOD값으로는 50mg/L이상 유지시 인제거 효율이 향상된 것으로 나타났다. 또한 RBDSCOD값이 작을 경우 OUR측정장치의 모니터링에 의해 외부탄소원의 주입농도를 결정하고 유입수의 RBDSCOD농도를 보정할 수 있었다. 유입수중의 인농도 측정을 위한 모니터링 시스템으로 혐기조에서 무산소조까지 PO4-P의 호흡정도를 실시간 예측할 수 있는 제어인자인 Cations(K+이온)을 측정하여 혐기조에서 무산소조까지 K+농도차가 8mg/L이상일 경우 PO4-P가 혐기조에서 release되어 호기조에서 uptake가 5mg/L이상 진행되어 유출수중의 인농도가 0.2mg/L이하로 유지되는 것으로 나타났다.
인은 수계(水界)에 부영양화 현상을 일으키는 주요 인자로서 하수중의 인은 주로 인축척미생물(PAOs:Phosphorous Accumulating Organisms)의 과잉섭취(uptake)에 통해 제거 된다. 본 연구에서는 인(P)을 처리하는 하수처리공정을 제어하는데 있다. 이를 위해 본 연구에서는 하수처리장의 유입수질에 따라 인의 성상을 조사하고, 생물학적 처리를 통한 인처리의 최적운전 제어인자를 도출 하여 목표수질 0.2mg/L이하 운전방안을 제시 하였으며, 추가로 후단부에 화학적 처리방법을 도입하여 최종방류수질을 0.05mg/L이하로 유지하는 제어방안을 제시하였다. 우선 BNR공정의 혐기조에 외부탄소원으로서 아세트산을 첨가하여 운영할 경우, 유입수 TP가 최대 97.5%까지 제거되었으며, 후단부 화학응집제 투입시 응집효율을 감소시키고 화학응집제로 제거하기 어려운 유기인(Org-P)도 95.8%까지 제거하여 총인(TP:Total Phosphorous)처리효율을 향상 시켰다. BNR공정의 in-line상에서 외부탄소원(External carbon source)의 투입농도를 결정하는 제어인자로 1차침전지 유출수에 OUR측정장치를 설치하여 유용한 기질인 RBDSCOD를 실시간 측정하여 PAOs미생물이 혐기조에서 P-release가 원할히 일어날 수 있도록 하였으며, 적정 RBDSCOD값으로는 50mg/L이상 유지시 인제거 효율이 향상된 것으로 나타났다. 또한 RBDSCOD값이 작을 경우 OUR측정장치의 모니터링에 의해 외부탄소원의 주입농도를 결정하고 유입수의 RBDSCOD농도를 보정할 수 있었다. 유입수중의 인농도 측정을 위한 모니터링 시스템으로 혐기조에서 무산소조까지 PO4-P의 호흡정도를 실시간 예측할 수 있는 제어인자인 Cations(K+이온)을 측정하여 혐기조에서 무산소조까지 K+농도차가 8mg/L이상일 경우 PO4-P가 혐기조에서 release되어 호기조에서 uptake가 5mg/L이상 진행되어 유출수중의 인농도가 0.2mg/L이하로 유지되는 것으로 나타났다.
Phosphorus is a main factor causing an eutrophic phenomenon to the hydrosphere and the phosphorous in sewage is mostly removed uptake of through PAOs. This study aims to control a sewage treatment process for treating phosphorus. For that, this study investigated the property of phosphorous accordin...
Phosphorus is a main factor causing an eutrophic phenomenon to the hydrosphere and the phosphorous in sewage is mostly removed uptake of through PAOs. This study aims to control a sewage treatment process for treating phosphorus. For that, this study investigated the property of phosphorous according to the quality of the water flowing in a sewage treatment plant, and proposed an operation method by which the target water quality is maintained in not more than 0.2mg/L by drawing the optimum operation control factor through biological treatment, and, in the later part, proposed a control method by which the quality of the finally discharged water is maintained in not more than 0.05ng/L by introducing a chemical treatment method. First of all, in case acetic acid was added into an anaerobic tank as outside carbon source, TP of the water that flowed in was removed up to the maximum 97.5 and in case a chemical cohesive agent was put into the later part, cohesive efficiency was reduced and Org-P was removed up to 95.8%, so that TP treatment efficiency improved. It was so designed that P-release of PAOs microorganism may smoothly occur in an anaerobic tank by installing OUR measurement device, as a control factor of determining the input density of external carbon source in-line of BNR process, at the primary settling basin effluence and by measuring RBCOD, a useful substrate in real time. As for RBCOD value, it was found that in case more than 50mg/L was maintained, phosphorous removal efficiency improved. In addition, in case RBCOD value is small, the input density of external carbon source was able to be determined and RBCOD density of effluence be supplemented by monitoring of OUR measuring device. As a monitoring system for measuring phosphorous density of effluence, I measured Cations(K+), a control factor able to estimate in real time the breathing degree of PO4-P from an anaerobic tank to an aerotropic tank, and as a result of that, in case K+ density difference is 8mg/L or more from an anaerobic tank to an aerotropic tank, PO4-P was released from an anaerobic tank, so that uptake progressed by 5mg/L or more and phosphorous density in effluence was maintained at not more than 0.2mg/L.
Phosphorus is a main factor causing an eutrophic phenomenon to the hydrosphere and the phosphorous in sewage is mostly removed uptake of through PAOs. This study aims to control a sewage treatment process for treating phosphorus. For that, this study investigated the property of phosphorous according to the quality of the water flowing in a sewage treatment plant, and proposed an operation method by which the target water quality is maintained in not more than 0.2mg/L by drawing the optimum operation control factor through biological treatment, and, in the later part, proposed a control method by which the quality of the finally discharged water is maintained in not more than 0.05ng/L by introducing a chemical treatment method. First of all, in case acetic acid was added into an anaerobic tank as outside carbon source, TP of the water that flowed in was removed up to the maximum 97.5 and in case a chemical cohesive agent was put into the later part, cohesive efficiency was reduced and Org-P was removed up to 95.8%, so that TP treatment efficiency improved. It was so designed that P-release of PAOs microorganism may smoothly occur in an anaerobic tank by installing OUR measurement device, as a control factor of determining the input density of external carbon source in-line of BNR process, at the primary settling basin effluence and by measuring RBCOD, a useful substrate in real time. As for RBCOD value, it was found that in case more than 50mg/L was maintained, phosphorous removal efficiency improved. In addition, in case RBCOD value is small, the input density of external carbon source was able to be determined and RBCOD density of effluence be supplemented by monitoring of OUR measuring device. As a monitoring system for measuring phosphorous density of effluence, I measured Cations(K+), a control factor able to estimate in real time the breathing degree of PO4-P from an anaerobic tank to an aerotropic tank, and as a result of that, in case K+ density difference is 8mg/L or more from an anaerobic tank to an aerotropic tank, PO4-P was released from an anaerobic tank, so that uptake progressed by 5mg/L or more and phosphorous density in effluence was maintained at not more than 0.2mg/L.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.