해상풍력발전단지의 대형화로 인해 풍력터빈의 설치 방향, 설치 간격이 최대의 에너지를 생산하는 풍력단지설계의 중요한 요소이다. 따라서 건설비용을 줄이고 높은 효율을 낼 수 있는 최적의 해상풍력발전단지 배치형태가가 중요하다. 본 논문에서는 영광군 낙월면 왕등여 해상지역에서 얻어진 풍황 자원을 사용하여 분석하였다. 측정지점의 평균풍속은 7.0[m/s]이고, 동(E)방위에서 3.6[%], 북(N)방위는 18.6[%]로 높은 빈도를 나타냈다. 120[MW]급 해상풍력발전단지를 설계 하여 ...
해상풍력발전단지의 대형화로 인해 풍력터빈의 설치 방향, 설치 간격이 최대의 에너지를 생산하는 풍력단지설계의 중요한 요소이다. 따라서 건설비용을 줄이고 높은 효율을 낼 수 있는 최적의 해상풍력발전단지 배치형태가가 중요하다. 본 논문에서는 영광군 낙월면 왕등여 해상지역에서 얻어진 풍황 자원을 사용하여 분석하였다. 측정지점의 평균풍속은 7.0[m/s]이고, 동(E)방위에서 3.6[%], 북(N)방위는 18.6[%]로 높은 빈도를 나타냈다. 120[MW]급 해상풍력발전단지를 설계 하여 EMD 사의 Windpro 2.6을 사용하여 분석하였다. 5[Km] x 4[Km]의 제한된 면적에 120[MW]급 해상풍력단지를 설계하여 분석한 결과 Repower 5[MW]는 가로 8기와 세로 3기의 배열로 총24기, V-112 3[MW] 발전기는 가로 10과 세로4기의 배열로 총 40기를 설치하였을 때 5D x 11D의 이격거리가 가장 높은 효율과 발전량을 보였다. 2개 기종의 발전기를 5D x 11D의 이격거리로 단지설계를 한 결과 Repower 5[MW]의 단지 효율은 94.1[%], V-112 3[MW]의 단지효율은 94[%]로 나타났고 풍력발전기 내부 전력연계 비용은 각각 168[억원]과 224[억원]으로 예상된다. 이격거리에 따른 발전량의 변화가 안정적으로 변하고 동일한 면적에서 최대의 효율을 내는 5D x 11D가 최적임을 확인하였다.
해상풍력발전단지의 대형화로 인해 풍력터빈의 설치 방향, 설치 간격이 최대의 에너지를 생산하는 풍력단지설계의 중요한 요소이다. 따라서 건설비용을 줄이고 높은 효율을 낼 수 있는 최적의 해상풍력발전단지 배치형태가가 중요하다. 본 논문에서는 영광군 낙월면 왕등여 해상지역에서 얻어진 풍황 자원을 사용하여 분석하였다. 측정지점의 평균풍속은 7.0[m/s]이고, 동(E)방위에서 3.6[%], 북(N)방위는 18.6[%]로 높은 빈도를 나타냈다. 120[MW]급 해상풍력발전단지를 설계 하여 EMD 사의 Windpro 2.6을 사용하여 분석하였다. 5[Km] x 4[Km]의 제한된 면적에 120[MW]급 해상풍력단지를 설계하여 분석한 결과 Repower 5[MW]는 가로 8기와 세로 3기의 배열로 총24기, V-112 3[MW] 발전기는 가로 10과 세로4기의 배열로 총 40기를 설치하였을 때 5D x 11D의 이격거리가 가장 높은 효율과 발전량을 보였다. 2개 기종의 발전기를 5D x 11D의 이격거리로 단지설계를 한 결과 Repower 5[MW]의 단지 효율은 94.1[%], V-112 3[MW]의 단지효율은 94[%]로 나타났고 풍력발전기 내부 전력연계 비용은 각각 168[억원]과 224[억원]으로 예상된다. 이격거리에 따른 발전량의 변화가 안정적으로 변하고 동일한 면적에서 최대의 효율을 내는 5D x 11D가 최적임을 확인하였다.
As the offshore wind farms have been larger, the array matrix is essential design factor of wind farms for maximum energy production. because it is effected on wind direction and wake turbulence of main stream. For high efficiency and reduction of construction cost, the optimal design technique of o...
As the offshore wind farms have been larger, the array matrix is essential design factor of wind farms for maximum energy production. because it is effected on wind direction and wake turbulence of main stream. For high efficiency and reduction of construction cost, the optimal design technique of offshore wind farm layout is required. In this paper, the wind data analyzed based on the wind resource that measured at the region of wangdeungyeo, nakwol-myeon, Youngkwang-gun. The results of calculation using EMD's Windpro 2.6 program showed that the average wind speed was 7.0 [m/s], the East(E) wind direction frequency was 3.6[%] and the Northern (N) wind direction frequency was 18.6[%]. The offshore wind farm designed which has 120[MW] capacity showed area was 5[Km] × 4[Km] and the array matrix 8×3 with Repower 5[MW] wind turbine. And also another designed wind farm with same area showed array matrix 10×4 with V-112 3[MW] wind turbine. Two wind farms have array distance 5D × 11D, showed the efficiency of 94.1[%] and 94[%] respectively. The cost evaluation results of internal cable for Repower 5[MW] and V-112 3[MW] expected as 168 billion and 224 billion won respectively. The best array distance certified as 5D × 11D with maximum efficiency.
As the offshore wind farms have been larger, the array matrix is essential design factor of wind farms for maximum energy production. because it is effected on wind direction and wake turbulence of main stream. For high efficiency and reduction of construction cost, the optimal design technique of offshore wind farm layout is required. In this paper, the wind data analyzed based on the wind resource that measured at the region of wangdeungyeo, nakwol-myeon, Youngkwang-gun. The results of calculation using EMD's Windpro 2.6 program showed that the average wind speed was 7.0 [m/s], the East(E) wind direction frequency was 3.6[%] and the Northern (N) wind direction frequency was 18.6[%]. The offshore wind farm designed which has 120[MW] capacity showed area was 5[Km] × 4[Km] and the array matrix 8×3 with Repower 5[MW] wind turbine. And also another designed wind farm with same area showed array matrix 10×4 with V-112 3[MW] wind turbine. Two wind farms have array distance 5D × 11D, showed the efficiency of 94.1[%] and 94[%] respectively. The cost evaluation results of internal cable for Repower 5[MW] and V-112 3[MW] expected as 168 billion and 224 billion won respectively. The best array distance certified as 5D × 11D with maximum efficiency.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.