고강도 콘크리트 구조물에 화재가 발생할 시 구조물 내부의 온도가 최고 1200℃까지 이르기도 한다. 이때 고강도 콘크리트의 특성상 폭렬현상이 발생할 수 있으며, 주철근의 온도가 높아져 구조적 안정성 및 내구성 저하 등의 치명적인 피해가 발생할 수 있다. 본 연구에서는 실리콘화합물을 베이스로 하여 난연제를 첨가한 내화재료를 이용하여 화재 발생 시 구조물의 안정성 및 내구성, 내화성능 확보 등의 가능성을 확인하고자 하였다. 이를 위해 실리콘 화합물에 ATH, ...
고강도 콘크리트 구조물에 화재가 발생할 시 구조물 내부의 온도가 최고 1200℃까지 이르기도 한다. 이때 고강도 콘크리트의 특성상 폭렬현상이 발생할 수 있으며, 주철근의 온도가 높아져 구조적 안정성 및 내구성 저하 등의 치명적인 피해가 발생할 수 있다. 본 연구에서는 실리콘화합물을 베이스로 하여 난연제를 첨가한 내화재료를 이용하여 화재 발생 시 구조물의 안정성 및 내구성, 내화성능 확보 등의 가능성을 확인하고자 하였다. 이를 위해 실리콘 화합물에 ATH, MDH, MC의 난연제를 25~40wt% 까지 중량비의 변화를 주어 제작한 시험편으로 열 특성 분석 및 내화성능의 분석을 수행 하였다. 시험결과 각각의 시험편 모두 내화성능의 우수함이 확인되었으며, 본 연구에서 적용한 시험편 중 ATH 35wt%를 첨가한 시험편이 가장 우수한 성능을 나타내는 것으로 확인되었다. 이를 바탕으로 FEA를 이용하여 실리콘/ATH 35wt% 복합체에 대하여 ISO-834곡선을 적용한 열전달 해석을 수행한 결과 195.4℃의 낮은 후면온도를 나타내는 것으로 확인되었다. 이를 통해 본 연구에서 제시한 내화재료를 고강도 콘크리트 구조물에 적용 시 구조물의 안정성, 내구성, 내화성능의 확보가 가능함을 확인 할 수 있었다.
고강도 콘크리트 구조물에 화재가 발생할 시 구조물 내부의 온도가 최고 1200℃까지 이르기도 한다. 이때 고강도 콘크리트의 특성상 폭렬현상이 발생할 수 있으며, 주철근의 온도가 높아져 구조적 안정성 및 내구성 저하 등의 치명적인 피해가 발생할 수 있다. 본 연구에서는 실리콘화합물을 베이스로 하여 난연제를 첨가한 내화재료를 이용하여 화재 발생 시 구조물의 안정성 및 내구성, 내화성능 확보 등의 가능성을 확인하고자 하였다. 이를 위해 실리콘 화합물에 ATH, MDH, MC의 난연제를 25~40wt% 까지 중량비의 변화를 주어 제작한 시험편으로 열 특성 분석 및 내화성능의 분석을 수행 하였다. 시험결과 각각의 시험편 모두 내화성능의 우수함이 확인되었으며, 본 연구에서 적용한 시험편 중 ATH 35wt%를 첨가한 시험편이 가장 우수한 성능을 나타내는 것으로 확인되었다. 이를 바탕으로 FEA를 이용하여 실리콘/ATH 35wt% 복합체에 대하여 ISO-834곡선을 적용한 열전달 해석을 수행한 결과 195.4℃의 낮은 후면온도를 나타내는 것으로 확인되었다. 이를 통해 본 연구에서 제시한 내화재료를 고강도 콘크리트 구조물에 적용 시 구조물의 안정성, 내구성, 내화성능의 확보가 가능함을 확인 할 수 있었다.
The high strength concrete structures might reach up to the highest inner temperature 1,200℃ of the structures when there is a fire. At this time, there could be spalling phenomenon as a feature of high strength concrete and fatal damages like falling off in structure stability and durability becaus...
The high strength concrete structures might reach up to the highest inner temperature 1,200℃ of the structures when there is a fire. At this time, there could be spalling phenomenon as a feature of high strength concrete and fatal damages like falling off in structure stability and durability because of the temperature increase in main reinforced bar. In the study, by using fireproof materials containing silicone compound as a base with flame retardants has been tried to verify the possibilities of securing the structural stability, durability, and fire resistance. To make it possible, analysis on thermal feature and the performance of fire resistant were performed with manufactured specimens which is silicone compounds produced through the changes of weight ratio of 25~40wt% with flame retardants like ATH, MDH, and MC. As the result, all the specimens were separately verified as to its excellence for fire resistance. Especially, specimen which is silicone compounds with ATH 35wt% is verified as the best specimen of the other specimens used in this study. Based on this, performed the heat transfer analysis applied with ISO-834 curve of a silicone/ATH 35wt% complex by using Midas-FEA. As a result, temperature of back of specimen is 195.4℃. Through this study, the possibility that could make stability, durability, and performance of fire resistance secured as a fireproof materials were verified when they are applied to high strength concrete structures.
The high strength concrete structures might reach up to the highest inner temperature 1,200℃ of the structures when there is a fire. At this time, there could be spalling phenomenon as a feature of high strength concrete and fatal damages like falling off in structure stability and durability because of the temperature increase in main reinforced bar. In the study, by using fireproof materials containing silicone compound as a base with flame retardants has been tried to verify the possibilities of securing the structural stability, durability, and fire resistance. To make it possible, analysis on thermal feature and the performance of fire resistant were performed with manufactured specimens which is silicone compounds produced through the changes of weight ratio of 25~40wt% with flame retardants like ATH, MDH, and MC. As the result, all the specimens were separately verified as to its excellence for fire resistance. Especially, specimen which is silicone compounds with ATH 35wt% is verified as the best specimen of the other specimens used in this study. Based on this, performed the heat transfer analysis applied with ISO-834 curve of a silicone/ATH 35wt% complex by using Midas-FEA. As a result, temperature of back of specimen is 195.4℃. Through this study, the possibility that could make stability, durability, and performance of fire resistance secured as a fireproof materials were verified when they are applied to high strength concrete structures.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.