國文抄錄 공동주택 건설현장의 화재안전 문제점 분석 및 대응 방안 Problem Analysis and Response of Securing Fire Protection of Apartment Building Projects 오 영 택 慶熙大學校 테크노經營大學院 建設安全經營學科 指導敎授 元 瑞 卿 건설공사중의 현장 산업재해 중 화재에 의한 재해는 대부분 방수작업, 도장작업, 보온 및 단열작업등의 마감작업에서의 용접 및 용단 작업, 동절기 난방 및 전열기구 사용, 전기의 누전 및 합선에 의해 발생되고 있다. 건설현장에서 발생되는 화재사고는 추락, 낙하, 감전 등 다른 위험요소에 비하여 발생비율은 매우 적지만 만일의 화재사고시 다수의 중대재해가 발생하여 강도율이 높다는 문제점이 있다 건설현장의 화재에 의한 재해는 공정 작업상 대부분 방수작업, 도장작업, 설비배관 용접작업, 보온 및 단열작업, 동절기의 난방 및 전열기구사용, 전기의 누전 및 합선에 의해 발생되고 있다. 이와 같은 건설현장에서의 화재로 인한 재해는 그 빈도수는 높지 않지만 많은 인명피해 및 구조물의 손상을 동반하는 대형재해로 연결되는 등 사회적으로 큰 물의를 일으킨다. 건설현장은 많은 건설근로자가 동일 장소에서 동시에 여러 공정을 진행하고 있으므로 화재 발생을 일으킬 수 있는 점화원을 취급하거나, 인화성, 가연성물질을 사용하는 위험작업과 타 공정간 중복으로 화재예방을 위한 중점 안전관리가 어렵다. 작업개시 전 화재예방 및 ...
國文抄錄 공동주택 건설현장의 화재안전 문제점 분석 및 대응 방안 Problem Analysis and Response of Securing Fire Protection of Apartment Building Projects 오 영 택 慶熙大學校 테크노經營大學院 建設安全經營學科 指導敎授 元 瑞 卿 건설공사중의 현장 산업재해 중 화재에 의한 재해는 대부분 방수작업, 도장작업, 보온 및 단열작업등의 마감작업에서의 용접 및 용단 작업, 동절기 난방 및 전열기구 사용, 전기의 누전 및 합선에 의해 발생되고 있다. 건설현장에서 발생되는 화재사고는 추락, 낙하, 감전 등 다른 위험요소에 비하여 발생비율은 매우 적지만 만일의 화재사고시 다수의 중대재해가 발생하여 강도율이 높다는 문제점이 있다 건설현장의 화재에 의한 재해는 공정 작업상 대부분 방수작업, 도장작업, 설비배관 용접작업, 보온 및 단열작업, 동절기의 난방 및 전열기구사용, 전기의 누전 및 합선에 의해 발생되고 있다. 이와 같은 건설현장에서의 화재로 인한 재해는 그 빈도수는 높지 않지만 많은 인명피해 및 구조물의 손상을 동반하는 대형재해로 연결되는 등 사회적으로 큰 물의를 일으킨다. 건설현장은 많은 건설근로자가 동일 장소에서 동시에 여러 공정을 진행하고 있으므로 화재 발생을 일으킬 수 있는 점화원을 취급하거나, 인화성, 가연성물질을 사용하는 위험작업과 타 공정간 중복으로 화재예방을 위한 중점 안전관리가 어렵다. 작업개시 전 화재예방 및 안전교육을 실시 후 작업자는 반드시 이를 준수해야 하며 현장 내에서는 모닥불 점화 및 흡연 등 화재원인이 될 수 있는 행위를 일체 금해야 한다. 가설 사무실, 창고 및 유류, 가스 등 위험물질은 반드시 지상에 설치 관리한다. 또한 작업장 내 인접장소에서 용접 및 용단 작업과 도장 및 우레탄 발포 등을 동시에 작업하는 행위를 엄격히 통제하여 인화성, 발화성, 가연물질을 제거·격리·차단하고 유증기 배출을 위한 충분한 환기시설을 설치 운영한다. 근로자들이 비상사태대비 대피를 위한 훈련을 연중 실시하며 유도등, 대피로, 화재를 전파할 수 있는 방송시설을 설치하며 적정한 소화기와 방화수를 비치, 연결송수관 및 소화전을 조기설치 운영하여 화재예방에 힘을 써야 한다. 화재발생을 원천적으로 억제하기 위하여 화재발생 3요소인 가연물, 산소, 점화원이 공존하지 않도록 하는 것이 매우 중요하다. 건설공사의 특성상 용접 및 용단작업 등이 이루어지는 경우 인화성, 가연성 물질 반입 신청 및 관리, 보관, 격리와 사전 작업허가제를 통한 엄격한 통제를 실시하여야 한다. 설비 작업시 가장 많이 사용되는 용접, 용단 작업을 최소화하기 위한 공법변경 등을 통하여 이를 최소화함으로써 화재위험요소를 최대한 경감시킬 수 있다. 소방안전교육은 반복적, 지속적으로 실시하여야 하는데 대부분의 건설현장은 각종 안전교육 시 법규상의 내용 중 화재예방에 대한 언급이 없어 화재예방대책 ,비상사태 시 대처능력, 소화장비 사용 방법, 대피방법 등에 대해 소방안전교육을 실시하지 않은 상태에서 근로자들이 투입 작업을 하고 있는 실정이다. 또한 건설현장에서 점차 비중이 높아지고 있는 외국인 근로자들을 위한 추락, 낙하, 감전 등 발생빈도가 높은 산업재해에 대한 교육용 교재 및 동영상 등은 많이 개발·보급되고 있지만 소방관서 및 안전관계기관 등 외국인 근로자들에 대한 화재예방 교재는 아직 초보적 수준에 머무르고 있는 실정이다. 따라서 본 논문은 공동주택 건설현장을 중심으로 7개 주요 공종별 화재위험요인 및 예방대책을 수립하고자 하였다. 이를 위해 재해사례 분석을 통하여 대책을 마련하였으며, 공사진척도 및 공종별 화재발생 위험요소, 인화성 및 가연성 물질을 파악하고 예방대책을 제시하였다. 본 연구의 결과는 공사장의 공종별 인화성·가연성 물질의 사용 현황 파악과 시공공정에 따른 공정별 화재위험 요소파악, 작업공정별 화재위험요인 및 예방대책을 마련하여 근로자들에 대한 안전교육 과정 중 화재예방교육을 개선함으로써 다양한 교육적 요구와 기대에 부응하는 정책 개선방향을 수립하는데 활용할 수 있을 것이다.
國文抄錄 공동주택 건설현장의 화재안전 문제점 분석 및 대응 방안 Problem Analysis and Response of Securing Fire Protection of Apartment Building Projects 오 영 택 慶熙大學校 테크노經營大學院 建設安全經營學科 指導敎授 元 瑞 卿 건설공사중의 현장 산업재해 중 화재에 의한 재해는 대부분 방수작업, 도장작업, 보온 및 단열작업등의 마감작업에서의 용접 및 용단 작업, 동절기 난방 및 전열기구 사용, 전기의 누전 및 합선에 의해 발생되고 있다. 건설현장에서 발생되는 화재사고는 추락, 낙하, 감전 등 다른 위험요소에 비하여 발생비율은 매우 적지만 만일의 화재사고시 다수의 중대재해가 발생하여 강도율이 높다는 문제점이 있다 건설현장의 화재에 의한 재해는 공정 작업상 대부분 방수작업, 도장작업, 설비배관 용접작업, 보온 및 단열작업, 동절기의 난방 및 전열기구사용, 전기의 누전 및 합선에 의해 발생되고 있다. 이와 같은 건설현장에서의 화재로 인한 재해는 그 빈도수는 높지 않지만 많은 인명피해 및 구조물의 손상을 동반하는 대형재해로 연결되는 등 사회적으로 큰 물의를 일으킨다. 건설현장은 많은 건설근로자가 동일 장소에서 동시에 여러 공정을 진행하고 있으므로 화재 발생을 일으킬 수 있는 점화원을 취급하거나, 인화성, 가연성물질을 사용하는 위험작업과 타 공정간 중복으로 화재예방을 위한 중점 안전관리가 어렵다. 작업개시 전 화재예방 및 안전교육을 실시 후 작업자는 반드시 이를 준수해야 하며 현장 내에서는 모닥불 점화 및 흡연 등 화재원인이 될 수 있는 행위를 일체 금해야 한다. 가설 사무실, 창고 및 유류, 가스 등 위험물질은 반드시 지상에 설치 관리한다. 또한 작업장 내 인접장소에서 용접 및 용단 작업과 도장 및 우레탄 발포 등을 동시에 작업하는 행위를 엄격히 통제하여 인화성, 발화성, 가연물질을 제거·격리·차단하고 유증기 배출을 위한 충분한 환기시설을 설치 운영한다. 근로자들이 비상사태대비 대피를 위한 훈련을 연중 실시하며 유도등, 대피로, 화재를 전파할 수 있는 방송시설을 설치하며 적정한 소화기와 방화수를 비치, 연결송수관 및 소화전을 조기설치 운영하여 화재예방에 힘을 써야 한다. 화재발생을 원천적으로 억제하기 위하여 화재발생 3요소인 가연물, 산소, 점화원이 공존하지 않도록 하는 것이 매우 중요하다. 건설공사의 특성상 용접 및 용단작업 등이 이루어지는 경우 인화성, 가연성 물질 반입 신청 및 관리, 보관, 격리와 사전 작업허가제를 통한 엄격한 통제를 실시하여야 한다. 설비 작업시 가장 많이 사용되는 용접, 용단 작업을 최소화하기 위한 공법변경 등을 통하여 이를 최소화함으로써 화재위험요소를 최대한 경감시킬 수 있다. 소방안전교육은 반복적, 지속적으로 실시하여야 하는데 대부분의 건설현장은 각종 안전교육 시 법규상의 내용 중 화재예방에 대한 언급이 없어 화재예방대책 ,비상사태 시 대처능력, 소화장비 사용 방법, 대피방법 등에 대해 소방안전교육을 실시하지 않은 상태에서 근로자들이 투입 작업을 하고 있는 실정이다. 또한 건설현장에서 점차 비중이 높아지고 있는 외국인 근로자들을 위한 추락, 낙하, 감전 등 발생빈도가 높은 산업재해에 대한 교육용 교재 및 동영상 등은 많이 개발·보급되고 있지만 소방관서 및 안전관계기관 등 외국인 근로자들에 대한 화재예방 교재는 아직 초보적 수준에 머무르고 있는 실정이다. 따라서 본 논문은 공동주택 건설현장을 중심으로 7개 주요 공종별 화재위험요인 및 예방대책을 수립하고자 하였다. 이를 위해 재해사례 분석을 통하여 대책을 마련하였으며, 공사진척도 및 공종별 화재발생 위험요소, 인화성 및 가연성 물질을 파악하고 예방대책을 제시하였다. 본 연구의 결과는 공사장의 공종별 인화성·가연성 물질의 사용 현황 파악과 시공공정에 따른 공정별 화재위험 요소파악, 작업공정별 화재위험요인 및 예방대책을 마련하여 근로자들에 대한 안전교육 과정 중 화재예방교육을 개선함으로써 다양한 교육적 요구와 기대에 부응하는 정책 개선방향을 수립하는데 활용할 수 있을 것이다.
ABSTRACT Problem Analysis and Response of Securing Fire Protection of Apartment Building Projects Oh, Young Taek Dept. of Construction Safety Management Graduate School of Technology Management Kyung Hee University Advised by Professor Won, Seo Kyung Fire accidents in site industrial disaster during...
ABSTRACT Problem Analysis and Response of Securing Fire Protection of Apartment Building Projects Oh, Young Taek Dept. of Construction Safety Management Graduate School of Technology Management Kyung Hee University Advised by Professor Won, Seo Kyung Fire accidents in site industrial disaster during construction works are caused by finishing works such as waterproof work, coating work, heating and insulation work, welding and cutting work, heating and heater use during winter season, short circuit and of electricity. While fire accident in the construction site has less occurrence rate than other risk factors such as dropping, falling and electric shock, it has severity rate of injury once fire accident takes place. Fire disaster at the construction site are caused by water proof, coating, piping, welding, heating and insulating, heating and heater use of winter season, and short circuit of electricity. While its frequency is not high at the construction site, it causes huge social issues due to accompanying large accident such as injury and death and damage of structure. As many workers progress many process at the same time in the construction site, it is hard to make key safety management to prevent fire accident due to overlap of risk works such as handling ignite, and use of inflammable and combustible materials with other processes. Before the work, fire prevention and safety education must be performed and workers should observe it at the site. Bonfire and smoking in the site can be cause of fire. Thus, such must be strictly prohibited. Temporary office, warehouse and hazardous materials such as fuel and gas must be installed on the ground. And, welding, cutting, coating and urethane forming works must be strictly controlled and inflammable, combustible and igniting materials must be removed, isolated and blocked. Sufficient ventilation facilities must be operated to release oil mist. Emergency evacuation training for workers must be performed regularly and exit sign, fire escape and broadcasting facilities to announce fire must be installed. Sufficient number of fire extinguishers and fire water must be equipped and water pipe and hydrant must be operated to prevent fire. To prevent fire, it is important not to place 3 factors of fire such as flammable, oxygen and ignition source at the same place. If welding and cutting work are carried out in the construction work, strict access control must be performed for introducing, application, management, storage, isolation and advanced permission of inflammable and combustible material. To minimize welding and cutting works which are the most frequent works, it is necessary to change construction method to reduce risk of fire to the full extent. Fire safety education must be performed repeatedly and continuously. Most construction sites have no statement of fire prevention on legal contents during safety education. So, workers begin to work without having knowledge on fire prevention measure, countermeasure in event of emergency, instruction of use of fire equipment and evacuation method. While education text book and video on high frequency disasters such as falling, drop and electric shock for foreign workers whose number continues to increase, the fire prevention textbook for foreign workers by the fire station and safety institutions are still elementary level. Accordingly, this study aimed to examine fire disaster factors of 7 major industries and to establish a preventive measure with special reference to apartment building project. For this purpose, countermeasure was planned by analyzing disaster cases and preventive measure was suggested by figuring out progression of work, risk factors of fire by industrial type and inflammable and combustible materials. The result of this study would be used to improve fire prevention education during safety education to workers and to improve policy direction to meet educational needs and expectation by examining the status of inflammable and combustible material use by industrial type, fire risk factors per process in the construction process, fire risk factors by work process and preventive measures.
ABSTRACT Problem Analysis and Response of Securing Fire Protection of Apartment Building Projects Oh, Young Taek Dept. of Construction Safety Management Graduate School of Technology Management Kyung Hee University Advised by Professor Won, Seo Kyung Fire accidents in site industrial disaster during construction works are caused by finishing works such as waterproof work, coating work, heating and insulation work, welding and cutting work, heating and heater use during winter season, short circuit and of electricity. While fire accident in the construction site has less occurrence rate than other risk factors such as dropping, falling and electric shock, it has severity rate of injury once fire accident takes place. Fire disaster at the construction site are caused by water proof, coating, piping, welding, heating and insulating, heating and heater use of winter season, and short circuit of electricity. While its frequency is not high at the construction site, it causes huge social issues due to accompanying large accident such as injury and death and damage of structure. As many workers progress many process at the same time in the construction site, it is hard to make key safety management to prevent fire accident due to overlap of risk works such as handling ignite, and use of inflammable and combustible materials with other processes. Before the work, fire prevention and safety education must be performed and workers should observe it at the site. Bonfire and smoking in the site can be cause of fire. Thus, such must be strictly prohibited. Temporary office, warehouse and hazardous materials such as fuel and gas must be installed on the ground. And, welding, cutting, coating and urethane forming works must be strictly controlled and inflammable, combustible and igniting materials must be removed, isolated and blocked. Sufficient ventilation facilities must be operated to release oil mist. Emergency evacuation training for workers must be performed regularly and exit sign, fire escape and broadcasting facilities to announce fire must be installed. Sufficient number of fire extinguishers and fire water must be equipped and water pipe and hydrant must be operated to prevent fire. To prevent fire, it is important not to place 3 factors of fire such as flammable, oxygen and ignition source at the same place. If welding and cutting work are carried out in the construction work, strict access control must be performed for introducing, application, management, storage, isolation and advanced permission of inflammable and combustible material. To minimize welding and cutting works which are the most frequent works, it is necessary to change construction method to reduce risk of fire to the full extent. Fire safety education must be performed repeatedly and continuously. Most construction sites have no statement of fire prevention on legal contents during safety education. So, workers begin to work without having knowledge on fire prevention measure, countermeasure in event of emergency, instruction of use of fire equipment and evacuation method. While education text book and video on high frequency disasters such as falling, drop and electric shock for foreign workers whose number continues to increase, the fire prevention textbook for foreign workers by the fire station and safety institutions are still elementary level. Accordingly, this study aimed to examine fire disaster factors of 7 major industries and to establish a preventive measure with special reference to apartment building project. For this purpose, countermeasure was planned by analyzing disaster cases and preventive measure was suggested by figuring out progression of work, risk factors of fire by industrial type and inflammable and combustible materials. The result of this study would be used to improve fire prevention education during safety education to workers and to improve policy direction to meet educational needs and expectation by examining the status of inflammable and combustible material use by industrial type, fire risk factors per process in the construction process, fire risk factors by work process and preventive measures.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.