최근 다양한 정보통신 기술의 급격한 발달로 새로운 정보화 사회가 도래하고 있다. 따라서 가볍고 얇아서 휴대하기 편리한 모바일 기기, 빠른 응답 속도, 낮은 소비 전력 및 넓은 시야각의 대형 디스플레이가 개발되고 있다. 현재 디스플레이 재료로 가장 많이 연구되고 있는 유기발광다이오드(Organic Light- emitting Diodes; OLEDs)는 기존의 디스플레이 시장을 점유하고 있는 액정표시장치(Liquid Crystal Display; LCD) 대비 응답속도가 천 배 이상 빠르고, 백라이트가 필요 없으며, ...
최근 다양한 정보통신 기술의 급격한 발달로 새로운 정보화 사회가 도래하고 있다. 따라서 가볍고 얇아서 휴대하기 편리한 모바일 기기, 빠른 응답 속도, 낮은 소비 전력 및 넓은 시야각의 대형 디스플레이가 개발되고 있다. 현재 디스플레이 재료로 가장 많이 연구되고 있는 유기발광다이오드(Organic Light- emitting Diodes; OLEDs)는 기존의 디스플레이 시장을 점유하고 있는 액정표시장치(Liquid Crystal Display; LCD) 대비 응답속도가 천 배 이상 빠르고, 백라이트가 필요 없으며, 구동전압도 낮고 시야각에 제한을 받지 않는다. 또한 높은 휘도와 효율 및 우수한 내구성과 내환경성 등의 장점과 무기 LED 광원과는 달리 점 광원, 선 광원, 면 광원 등 다양한 모양의 광원 제작이 가능하고 소자 구조가 간단하여 제작이 용이하므로 차세대 조명 및 디스플레이 장치로 활용 가치가 높다. 기존의 유리 기판 대신 플라스틱 기판을 이용한 제작이 가능하여 얇고, 또 필요할 때 펼치거나 구부릴 수 있는 가요(Flexible) 디스플레이로써 적합하여 이에 관한 다양한 연구가 활발하게 진행되고 있다. 본 논문에서는 OLEDs 층수 변화가 소자의 특성에 미치는 영향을 조사하기 위하여 저분자 유기 재료 시료를 정공 주입층(HIL) 물질인 Teflon-AF, 정공 수송층(HTL) 물질인 TPD, 발광층(EML) 물질인 Alq3, 전자 수송층(ETL) 물질인 BCP를 사용 하였다. 또한 전자 주입층(EIL) 물질은 Li2CO3(Lithium carbonate)와 LiF(Lithiumfluoride) 2종류 중 하나를 선택하여 제작하였다. 그리고 층수를 2층에서 5층으로 삽입하면 각 층에 삽입된 유기물질이 에너지 장벽을 낮추어 정공과 전자의 이동을 용이하게 하여 낮은 전압에서도 정공과 전자의 재결합을 향상시켜 휘도특성은 34.92배, 발광 효율은 11.39배, 외부양자 효율은 5.8배 우수함을 확인하였다.
최근 다양한 정보통신 기술의 급격한 발달로 새로운 정보화 사회가 도래하고 있다. 따라서 가볍고 얇아서 휴대하기 편리한 모바일 기기, 빠른 응답 속도, 낮은 소비 전력 및 넓은 시야각의 대형 디스플레이가 개발되고 있다. 현재 디스플레이 재료로 가장 많이 연구되고 있는 유기발광다이오드(Organic Light- emitting Diodes; OLEDs)는 기존의 디스플레이 시장을 점유하고 있는 액정표시장치(Liquid Crystal Display; LCD) 대비 응답속도가 천 배 이상 빠르고, 백라이트가 필요 없으며, 구동전압도 낮고 시야각에 제한을 받지 않는다. 또한 높은 휘도와 효율 및 우수한 내구성과 내환경성 등의 장점과 무기 LED 광원과는 달리 점 광원, 선 광원, 면 광원 등 다양한 모양의 광원 제작이 가능하고 소자 구조가 간단하여 제작이 용이하므로 차세대 조명 및 디스플레이 장치로 활용 가치가 높다. 기존의 유리 기판 대신 플라스틱 기판을 이용한 제작이 가능하여 얇고, 또 필요할 때 펼치거나 구부릴 수 있는 가요(Flexible) 디스플레이로써 적합하여 이에 관한 다양한 연구가 활발하게 진행되고 있다. 본 논문에서는 OLEDs 층수 변화가 소자의 특성에 미치는 영향을 조사하기 위하여 저분자 유기 재료 시료를 정공 주입층(HIL) 물질인 Teflon-AF, 정공 수송층(HTL) 물질인 TPD, 발광층(EML) 물질인 Alq3, 전자 수송층(ETL) 물질인 BCP를 사용 하였다. 또한 전자 주입층(EIL) 물질은 Li2CO3(Lithium carbonate)와 LiF(Lithium fluoride) 2종류 중 하나를 선택하여 제작하였다. 그리고 층수를 2층에서 5층으로 삽입하면 각 층에 삽입된 유기물질이 에너지 장벽을 낮추어 정공과 전자의 이동을 용이하게 하여 낮은 전압에서도 정공과 전자의 재결합을 향상시켜 휘도특성은 34.92배, 발광 효율은 11.39배, 외부양자 효율은 5.8배 우수함을 확인하였다.
A new information society has came by the rapid development of various information & communications technologies. Accordingly, mobile devices which are light and thin, easy and convenient to carry on the market and the requirements for the large television sets such as fast response speed, low-cost ...
A new information society has came by the rapid development of various information & communications technologies. Accordingly, mobile devices which are light and thin, easy and convenient to carry on the market and the requirements for the large television sets such as fast response speed, low-cost electric power, and wide visual angle display are sufficiently satisfied. Currently widely studied display material, Organic Light-emitting Diodes (OLEDs) overwhelms the Liquid Crystal Display (LCD), the main occupier of the market. This new material features a response speed of more than a thousand times faster, no need of backlight, a low driving voltage, and no limit of view angle. And the OLEDs has high luminance efficiency, excellent durability, and environment resistance, quite different from the inorganic LED light source. The OLEDs with simple device structure and easy production can be manufactured in various shapes such as a point light source, a linear light source, a plane light source and etc. This will surely dominate the market for the next generation lighting and display device. The new display utilizes not the glass substrate but the plastic one, resulting in the thin and flexible substrate that can be curved and flattened out as needed. In this thesis, the specimens of the low-molecular organic materials are produced to investigate the effects on the characteristics of the OLEDs device depending on the number of layer by using hole-injection layer (HIL) material Teflon-AF, hole-transport layer (HTL) material TPD, emission layer (EML) Alq3, electron transport layer (ETL) material BCP and electron injection layer (EIL) material Li2CO3(Lithium carbonate) and two types of LiF. And insertion the number of layers from 2 layers to 5 layers, lowers the energy barrier and facilitates the movement of hole and electron, improving also the recombination of holes and electrons at low voltage. And it is confirmed that there is an improvement of luminance characteristics by 34.92 times, the luminance efficiency by 11.39 times, and the external quantum efficiency by 5.8 times.
A new information society has came by the rapid development of various information & communications technologies. Accordingly, mobile devices which are light and thin, easy and convenient to carry on the market and the requirements for the large television sets such as fast response speed, low-cost electric power, and wide visual angle display are sufficiently satisfied. Currently widely studied display material, Organic Light-emitting Diodes (OLEDs) overwhelms the Liquid Crystal Display (LCD), the main occupier of the market. This new material features a response speed of more than a thousand times faster, no need of backlight, a low driving voltage, and no limit of view angle. And the OLEDs has high luminance efficiency, excellent durability, and environment resistance, quite different from the inorganic LED light source. The OLEDs with simple device structure and easy production can be manufactured in various shapes such as a point light source, a linear light source, a plane light source and etc. This will surely dominate the market for the next generation lighting and display device. The new display utilizes not the glass substrate but the plastic one, resulting in the thin and flexible substrate that can be curved and flattened out as needed. In this thesis, the specimens of the low-molecular organic materials are produced to investigate the effects on the characteristics of the OLEDs device depending on the number of layer by using hole-injection layer (HIL) material Teflon-AF, hole-transport layer (HTL) material TPD, emission layer (EML) Alq3, electron transport layer (ETL) material BCP and electron injection layer (EIL) material Li2CO3(Lithium carbonate) and two types of LiF. And insertion the number of layers from 2 layers to 5 layers, lowers the energy barrier and facilitates the movement of hole and electron, improving also the recombination of holes and electrons at low voltage. And it is confirmed that there is an improvement of luminance characteristics by 34.92 times, the luminance efficiency by 11.39 times, and the external quantum efficiency by 5.8 times.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.