기존의 전부도재관에 비해 단일구조 지르코니아는 물리적·기계적 성질이 우수하며 자연스러운 색조 재현이 가능하여 임상적으로 많은 관심을 받고 있는 소재이다. 지르코니아 색조 재현을 위해 다양한 착색제와 유색 지르코니아 블록이 소개되고 있다. 그러나 색조 부여가 지르코니아 성질에 미치는 영향에 대한 연구는 부족한 실정이다. 최근에는 지르코니아의 성질을 변화시키지 않는 범위에서 자연스러운 색조를 부여할 수 있는 유색 지르코니아 연구에 대한 필요성이 중...
기존의 전부도재관에 비해 단일구조 지르코니아는 물리적·기계적 성질이 우수하며 자연스러운 색조 재현이 가능하여 임상적으로 많은 관심을 받고 있는 소재이다. 지르코니아 색조 재현을 위해 다양한 착색제와 유색 지르코니아 블록이 소개되고 있다. 그러나 색조 부여가 지르코니아 성질에 미치는 영향에 대한 연구는 부족한 실정이다. 최근에는 지르코니아의 성질을 변화시키지 않는 범위에서 자연스러운 색조를 부여할 수 있는 유색 지르코니아 연구에 대한 필요성이 중시되고 있다. 본 연구에서는 수성 착색제가 지르코니아의 색조와 경도에 미치는 영향을 알아보고자 지르코니아 시편에 색조를 부여한 후 CIE L*, a*, b*, c*, h* 색체계를 이용하여 각 시편군의 색조를 측색기로 측정하고, 비커스 경도기로 경도 값을 측정한 후 분석하여 다음과 같은 결론을 얻었다. 1. ZW 시편군의 CIE a*, b*, c*, h*값이 ZA 시편군에 비해 통계적으로 유의하게 높았다 (P<0.001). 이는 ZW 시편군이 ZA 시편군에 비해 채도가 높고 적색, 황색 경향을 띤다는 것을 의미한다. 2. 모든 시편군에서 도포 횟수가 증가할수록 CIE L*, h*값은 통계적으로 유의하게 감소하였고, CIE a*, b*, c*값은 통계적으로 유의하게 높아졌다 (P<0.001). 이는 무색 지르코니아에 색조를 부여하면 명도는 낮아지며 채도는 높아지고, 적색과 황색을 띤다는 것을 의미한다. 3. 착색하지 않은 지르코니아 시편군의 경도 값이 가장 높았으며, 색조를 부여한 경우, 모든 시편군에서 경도 값이 통계적으로 유의하게 낮아졌다 (P<0.001). 4. ZA 시편군의 경도 값이 ZW 시편군에 비해 통계적으로 유의하게 낮았다 (P<0.001). 5. ZA 시편군에서는 도포횟수가 증가함에 따라 경도 값이 유의하게 감소하였으나 (P<0.001), ZW 시편군에서는 통계적으로 유의한 차이가 나타나지 않았다 (P>0.05). 6. 색조를 부여한 모든 시편군에서 결정립 크기변화는 관찰되지 않았다.
기존의 전부도재관에 비해 단일구조 지르코니아는 물리적·기계적 성질이 우수하며 자연스러운 색조 재현이 가능하여 임상적으로 많은 관심을 받고 있는 소재이다. 지르코니아 색조 재현을 위해 다양한 착색제와 유색 지르코니아 블록이 소개되고 있다. 그러나 색조 부여가 지르코니아 성질에 미치는 영향에 대한 연구는 부족한 실정이다. 최근에는 지르코니아의 성질을 변화시키지 않는 범위에서 자연스러운 색조를 부여할 수 있는 유색 지르코니아 연구에 대한 필요성이 중시되고 있다. 본 연구에서는 수성 착색제가 지르코니아의 색조와 경도에 미치는 영향을 알아보고자 지르코니아 시편에 색조를 부여한 후 CIE L*, a*, b*, c*, h* 색체계를 이용하여 각 시편군의 색조를 측색기로 측정하고, 비커스 경도기로 경도 값을 측정한 후 분석하여 다음과 같은 결론을 얻었다. 1. ZW 시편군의 CIE a*, b*, c*, h*값이 ZA 시편군에 비해 통계적으로 유의하게 높았다 (P<0.001). 이는 ZW 시편군이 ZA 시편군에 비해 채도가 높고 적색, 황색 경향을 띤다는 것을 의미한다. 2. 모든 시편군에서 도포 횟수가 증가할수록 CIE L*, h*값은 통계적으로 유의하게 감소하였고, CIE a*, b*, c*값은 통계적으로 유의하게 높아졌다 (P<0.001). 이는 무색 지르코니아에 색조를 부여하면 명도는 낮아지며 채도는 높아지고, 적색과 황색을 띤다는 것을 의미한다. 3. 착색하지 않은 지르코니아 시편군의 경도 값이 가장 높았으며, 색조를 부여한 경우, 모든 시편군에서 경도 값이 통계적으로 유의하게 낮아졌다 (P<0.001). 4. ZA 시편군의 경도 값이 ZW 시편군에 비해 통계적으로 유의하게 낮았다 (P<0.001). 5. ZA 시편군에서는 도포횟수가 증가함에 따라 경도 값이 유의하게 감소하였으나 (P<0.001), ZW 시편군에서는 통계적으로 유의한 차이가 나타나지 않았다 (P>0.05). 6. 색조를 부여한 모든 시편군에서 결정립 크기변화는 관찰되지 않았다.
The purpose of this study was to evaluate effect of water based coloring liquid on the color and hardness of zirconia. Eighty monolithic zirconia specimens (10 mm × 10 mm × 2 mm) were fabricated and divided into 4 groups according to the coloring (unshaded zirconia (control), pre colored zirconia, w...
The purpose of this study was to evaluate effect of water based coloring liquid on the color and hardness of zirconia. Eighty monolithic zirconia specimens (10 mm × 10 mm × 2 mm) were fabricated and divided into 4 groups according to the coloring (unshaded zirconia (control), pre colored zirconia, water based coloring liquid shaded zirconia, acid based coloring liquid shaded zirconia), shade zirconia was divided into three subgroups according to the number of coloring (1, 3 and 6). Color coordinates (CIE a*, b*, c*, h*) were measured with a spectrophotometer and hardness test and microstructure observation were performed. 1. Significant differences in the CIE a*, b*, c*, h* value between water based coloring liquid shaded group and acid based coloring liquid shaded group was observed (P<0.001). 2. Increasing the number of colorings resulted in an increase in the CIE a*, b* and c* value and a decrease in the CIE L*, h* value in all groups (P<0.001). 3. Coloring caused a decrease in the hardness (P<0.001). 4. Significant differences in the hardness value between water based coloring liquid shaded group and acid based coloring liquid shaded group was observed (P<0.001). 5. Coloring did not caused a change of zirconia grain size.
The purpose of this study was to evaluate effect of water based coloring liquid on the color and hardness of zirconia. Eighty monolithic zirconia specimens (10 mm × 10 mm × 2 mm) were fabricated and divided into 4 groups according to the coloring (unshaded zirconia (control), pre colored zirconia, water based coloring liquid shaded zirconia, acid based coloring liquid shaded zirconia), shade zirconia was divided into three subgroups according to the number of coloring (1, 3 and 6). Color coordinates (CIE a*, b*, c*, h*) were measured with a spectrophotometer and hardness test and microstructure observation were performed. 1. Significant differences in the CIE a*, b*, c*, h* value between water based coloring liquid shaded group and acid based coloring liquid shaded group was observed (P<0.001). 2. Increasing the number of colorings resulted in an increase in the CIE a*, b* and c* value and a decrease in the CIE L*, h* value in all groups (P<0.001). 3. Coloring caused a decrease in the hardness (P<0.001). 4. Significant differences in the hardness value between water based coloring liquid shaded group and acid based coloring liquid shaded group was observed (P<0.001). 5. Coloring did not caused a change of zirconia grain size.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.