LCD를 적용한 제품들의 개발로 폐기된 LCD 제품들이 재활용 되지 못하고 매립 또는 소각되어 발생한 환경오염과 천연모래의 공급이 부족하여 대체골재의 일환으로 사용했던 바닷모래의 수급도 환경보호 및 민원증가로 인한 공급이 어려운 상황이다. 본 연구에서는 설계강도 24MPa에서 잔골재 대신 LCD 폐유리를 사용한 LCD 폐유리 콘크리트의 특성을 통해 LCD 폐유리의 잔골재 대체 가능성을 확인하고자 하였다. 이를 위해 24MPa 배합비에 LCD 폐유리를 혼입하지 않은 콘크리트와 LCD 폐유리를 30∼100% 까지 15%씩 증가시킨 총 6가지 계열의 공시체를 제작하여 슬럼프와 공기량 시험을 수행하였고, 재령 3, 7, 28일의 압축강도와 쪼갬 ...
LCD를 적용한 제품들의 개발로 폐기된 LCD 제품들이 재활용 되지 못하고 매립 또는 소각되어 발생한 환경오염과 천연모래의 공급이 부족하여 대체골재의 일환으로 사용했던 바닷모래의 수급도 환경보호 및 민원증가로 인한 공급이 어려운 상황이다. 본 연구에서는 설계강도 24MPa에서 잔골재 대신 LCD 폐유리를 사용한 LCD 폐유리 콘크리트의 특성을 통해 LCD 폐유리의 잔골재 대체 가능성을 확인하고자 하였다. 이를 위해 24MPa 배합비에 LCD 폐유리를 혼입하지 않은 콘크리트와 LCD 폐유리를 30∼100% 까지 15%씩 증가시킨 총 6가지 계열의 공시체를 제작하여 슬럼프와 공기량 시험을 수행하였고, 재령 3, 7, 28일의 압축강도와 쪼갬 인장강도, 탄성계수 시험을 수행하였다. 이러한 시험결과로 LCD 폐유리 콘크리트에서 강도가 증진되는 것이 확인되었으며, 콘크리트 잔골재의 조립률을 만족할 경우 LCD 폐유리의 잔골재 대체가 가능함을 확인 할 수 있었다.
LCD를 적용한 제품들의 개발로 폐기된 LCD 제품들이 재활용 되지 못하고 매립 또는 소각되어 발생한 환경오염과 천연모래의 공급이 부족하여 대체골재의 일환으로 사용했던 바닷모래의 수급도 환경보호 및 민원증가로 인한 공급이 어려운 상황이다. 본 연구에서는 설계강도 24MPa에서 잔골재 대신 LCD 폐유리를 사용한 LCD 폐유리 콘크리트의 특성을 통해 LCD 폐유리의 잔골재 대체 가능성을 확인하고자 하였다. 이를 위해 24MPa 배합비에 LCD 폐유리를 혼입하지 않은 콘크리트와 LCD 폐유리를 30∼100% 까지 15%씩 증가시킨 총 6가지 계열의 공시체를 제작하여 슬럼프와 공기량 시험을 수행하였고, 재령 3, 7, 28일의 압축강도와 쪼갬 인장강도, 탄성계수 시험을 수행하였다. 이러한 시험결과로 LCD 폐유리 콘크리트에서 강도가 증진되는 것이 확인되었으며, 콘크리트 잔골재의 조립률을 만족할 경우 LCD 폐유리의 잔골재 대체가 가능함을 확인 할 수 있었다.
LCD products have not been discarded in the development of products applied to LCD recycling is buried or incinerated due to insufficient supply of environmental pollution and use of natural sand that occurs as part of alternative aggregate. The supply of sea sand is also environmental protection an...
LCD products have not been discarded in the development of products applied to LCD recycling is buried or incinerated due to insufficient supply of environmental pollution and use of natural sand that occurs as part of alternative aggregate. The supply of sea sand is also environmental protection and supply of a difficult situation due to the increase in complaints. In this study, through the characteristics of the LCD waste glass aggregate concrete using waste glass in the LCD the design strength 24MPa LCD was to determine the potential of alternative waste glass aggregate. LCD waste glass, concrete and not incorporation ratio for the LCD waste glass to 24MPa them one by 15% to 30∼100% was increased to produce a total of six specimens series perform the slump and air content test, age of 3, 7 or 28 days pressure and splitting tensile strength, modulus of elasticity tests were performed. such was found to result in strength is promoted on the LCD waste glass concrete testing, if you are satisfied with the rate of fine aggregate concrete has replaced the LCD waste glass aggregate could determine the possible.
LCD products have not been discarded in the development of products applied to LCD recycling is buried or incinerated due to insufficient supply of environmental pollution and use of natural sand that occurs as part of alternative aggregate. The supply of sea sand is also environmental protection and supply of a difficult situation due to the increase in complaints. In this study, through the characteristics of the LCD waste glass aggregate concrete using waste glass in the LCD the design strength 24MPa LCD was to determine the potential of alternative waste glass aggregate. LCD waste glass, concrete and not incorporation ratio for the LCD waste glass to 24MPa them one by 15% to 30∼100% was increased to produce a total of six specimens series perform the slump and air content test, age of 3, 7 or 28 days pressure and splitting tensile strength, modulus of elasticity tests were performed. such was found to result in strength is promoted on the LCD waste glass concrete testing, if you are satisfied with the rate of fine aggregate concrete has replaced the LCD waste glass aggregate could determine the possible.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.