미용분야에서 가발 및 수염을 부착할 때 사용하고 있는 스프리트 검의 성분 중 로진(rosin)과 콜로포니(colophony)는 피부에 자극을 일으켜 통증과 알레르기를 유발하고 피부 부작용을 일으킨다. 이러한 부작용을 줄일 수 있는 접착제 개발이 필요한 실정으로 이 연구에서는 미용용 접착제로 사용되고 있는 스프리트 검을 대체할 수 있는 접착제를 천연성분을 이용하여 제조하였다. 접착제에 사용된 천연 성분은 키토산, 카제인, 구아 검이며 제조된 미용용 접착제는 안전성, 안정성, 효능, 사용감을 평가하였다. 접착제의 제조 방법은 증류수와 점증제, ...
미용분야에서 가발 및 수염을 부착할 때 사용하고 있는 스프리트 검의 성분 중 로진(rosin)과 콜로포니(colophony)는 피부에 자극을 일으켜 통증과 알레르기를 유발하고 피부 부작용을 일으킨다. 이러한 부작용을 줄일 수 있는 접착제 개발이 필요한 실정으로 이 연구에서는 미용용 접착제로 사용되고 있는 스프리트 검을 대체할 수 있는 접착제를 천연성분을 이용하여 제조하였다. 접착제에 사용된 천연 성분은 키토산, 카제인, 구아 검이며 제조된 미용용 접착제는 안전성, 안정성, 효능, 사용감을 평가하였다. 접착제의 제조 방법은 증류수와 점증제, 산화방지제, 실리카, 에탄올, 유화제 등이 포함된 베이스에 키토산, 카제인, 구아 검을 각각 넣어 제조하였다. 제조된 접착제의 안전성을 평가하기위해 섬유아세포를 사용한 MTT-assay 방법으로 세포독성을 실험하였으며, 피부 첩포 실험은 Iq ultra chambers를 사용하여 인체 폐쇄 첩포 시험을 하였다. 안정성 평가로는 제조된 접착제를 원심분리기에 넣어 4시간 동안 분리 상태를 평가하였다. 저온과 고온에서의 사이클링 테스트를 통해 제형 변화와 분리 상태를 실험하였고, 점도 측정기(DV-E Viscomerter, Brookfied, U.S.A)를 이용하여 제조된 미용용 접착제의 점도를 측정하였다. 성능평가를 위해 접착제의 인장강도를 Testing Machine(STM-5, United Calibration, Instron, USA)을 사용하여 실험하였고, 사용성 평가는 전문가 집단을 대상으로 발림성(spreadability), 접착성(adhesiveness), 적용감(applicability), 지속성(persistence), 제거능(removability)에 관한 항목으로 설문 평가를 하였다.
천연 성분을 이용한 미용용 접착제의 제조 및 평가 결과는 다음과 같다. 1. 접착제의 조성으로는 D. I. water 70 g을 기본으로 NA-CMC 0.2 g, EDTA-2NA 0.03 g, Glycerin 3 g, PVA 14.8 g을 용해하여 A상을 제조하였다. B상의 원료로 Ethanol 9 g, PYP-K30 0.5 g, M.P 0.2 g, Histoacryl 0.02 g, Polybutene 5 g로 제조하였다. 제조된 A상과 B상을 혼합하여 접착제의 기본 베이스 제형을 제조하였고, 제조된 제형에 천연 성분인 키토산, 카제인, 구아 검을 5 g씩 각각 혼합하여 천연 접착제를 제조하였다. 대조제품으로는 가발과 수염 접착에 가장 일반적으로 사용되고 있는 미용용 접착제인 스프리트 검으로 선정하였다. 2. 키토산, 카제인, 구아 검의 천연 성분을 함유한 접착제와 대조 제품인 스프리트 검의 항균활성을 실험한 결과 키토산을 이용한 접착제에서 저해환이 생성되어 항균활성을 확인하였다. 키토산 외에 다른 제품에서는 항균활성이 나타나지 않았다. 3. 접착제의 안전성 평가 결과 천연 성분을 이용한 접착제에서 스프리트 검에 비해 세포 생존율이 높게 나타났다. 제조된 접착제 중에서는 구아 검을 함유한 접착제가 가장 높은 세포 생존율을 보였고, MTT-assay 방법에서 안전성이 가장 우수하게 평가되었다. 첩포 실험 결과 실험대상자 중 스프리트 검 2.4%의 의양성(-/+)반응을 보였고, 키토산은 7.2%로 의양성(-/+)반응이 4.8%, 약양성(+)반응이 2.4%으로 양성반응을 보였다. 카제인과 구아 검을 함유한 접착제에서는 알레르기 반응이 나타나지 않아 안전성을 확인하였다. 4. 성능 평가 결과 천연 성분을 함유한 각각의 접착제가 스프리트 검보다 높은 인장강도를 보였고, 이 중 구아 검이 함유된 접착제가 2.54±0.12 MPa로 가장 높은 인장강도를 나타내어 접착성능이 가장 우수하게 평가되었다. 5. 원심분리 테스트와 사이클링 테스트 결과 제조된 접착제 모두 분리와 성상의 변화가 없었다. 점도 측정에서는 스프리트 검에 비해 천연 성분으로 제조한 접착제가 점성이 높게 나타났다. 이 중에서 구아 검의 점성이 가장 높게 측정되었다. 6. 미용 분야에서 접착제를 사용하고 있는 전문가 집단을 대상으로 키토산, 카제인, 구아 검을 이용하여 제조한 접착제와 스프리트 검의 사용성을 평가한 결과 천연 성분을 이용한 접착제가 스프리트 검보다 발림성 항목을 제외한 접착성, 적용감, 지속성, 제거능 항목에서 사용성이 높게 평가 되었다.
이 연구에서 천연 성분을 이용하여 미용용 접착제를 제조하고 제조된 접착제를 시판제품과 비교한 결과 시판제품인 스프리트 검보다 항균, 안전성, 안정성, 성능 평가에 대해 우수한 결과를 확인하였다. 제조한 접착제 중 구아 검을 이용한 접착제가 안정성과 효능 평가 결과 가장 우수하게 나타나 개발 및 시판 가능성을 확인할 수 있었다.
미용분야에서 가발 및 수염을 부착할 때 사용하고 있는 스프리트 검의 성분 중 로진(rosin)과 콜로포니(colophony)는 피부에 자극을 일으켜 통증과 알레르기를 유발하고 피부 부작용을 일으킨다. 이러한 부작용을 줄일 수 있는 접착제 개발이 필요한 실정으로 이 연구에서는 미용용 접착제로 사용되고 있는 스프리트 검을 대체할 수 있는 접착제를 천연성분을 이용하여 제조하였다. 접착제에 사용된 천연 성분은 키토산, 카제인, 구아 검이며 제조된 미용용 접착제는 안전성, 안정성, 효능, 사용감을 평가하였다. 접착제의 제조 방법은 증류수와 점증제, 산화방지제, 실리카, 에탄올, 유화제 등이 포함된 베이스에 키토산, 카제인, 구아 검을 각각 넣어 제조하였다. 제조된 접착제의 안전성을 평가하기위해 섬유아세포를 사용한 MTT-assay 방법으로 세포독성을 실험하였으며, 피부 첩포 실험은 Iq ultra chambers를 사용하여 인체 폐쇄 첩포 시험을 하였다. 안정성 평가로는 제조된 접착제를 원심분리기에 넣어 4시간 동안 분리 상태를 평가하였다. 저온과 고온에서의 사이클링 테스트를 통해 제형 변화와 분리 상태를 실험하였고, 점도 측정기(DV-E Viscomerter, Brookfied, U.S.A)를 이용하여 제조된 미용용 접착제의 점도를 측정하였다. 성능평가를 위해 접착제의 인장강도를 Testing Machine(STM-5, United Calibration, Instron, USA)을 사용하여 실험하였고, 사용성 평가는 전문가 집단을 대상으로 발림성(spreadability), 접착성(adhesiveness), 적용감(applicability), 지속성(persistence), 제거능(removability)에 관한 항목으로 설문 평가를 하였다.
천연 성분을 이용한 미용용 접착제의 제조 및 평가 결과는 다음과 같다. 1. 접착제의 조성으로는 D. I. water 70 g을 기본으로 NA-CMC 0.2 g, EDTA-2NA 0.03 g, Glycerin 3 g, PVA 14.8 g을 용해하여 A상을 제조하였다. B상의 원료로 Ethanol 9 g, PYP-K30 0.5 g, M.P 0.2 g, Histoacryl 0.02 g, Polybutene 5 g로 제조하였다. 제조된 A상과 B상을 혼합하여 접착제의 기본 베이스 제형을 제조하였고, 제조된 제형에 천연 성분인 키토산, 카제인, 구아 검을 5 g씩 각각 혼합하여 천연 접착제를 제조하였다. 대조제품으로는 가발과 수염 접착에 가장 일반적으로 사용되고 있는 미용용 접착제인 스프리트 검으로 선정하였다. 2. 키토산, 카제인, 구아 검의 천연 성분을 함유한 접착제와 대조 제품인 스프리트 검의 항균활성을 실험한 결과 키토산을 이용한 접착제에서 저해환이 생성되어 항균활성을 확인하였다. 키토산 외에 다른 제품에서는 항균활성이 나타나지 않았다. 3. 접착제의 안전성 평가 결과 천연 성분을 이용한 접착제에서 스프리트 검에 비해 세포 생존율이 높게 나타났다. 제조된 접착제 중에서는 구아 검을 함유한 접착제가 가장 높은 세포 생존율을 보였고, MTT-assay 방법에서 안전성이 가장 우수하게 평가되었다. 첩포 실험 결과 실험대상자 중 스프리트 검 2.4%의 의양성(-/+)반응을 보였고, 키토산은 7.2%로 의양성(-/+)반응이 4.8%, 약양성(+)반응이 2.4%으로 양성반응을 보였다. 카제인과 구아 검을 함유한 접착제에서는 알레르기 반응이 나타나지 않아 안전성을 확인하였다. 4. 성능 평가 결과 천연 성분을 함유한 각각의 접착제가 스프리트 검보다 높은 인장강도를 보였고, 이 중 구아 검이 함유된 접착제가 2.54±0.12 MPa로 가장 높은 인장강도를 나타내어 접착성능이 가장 우수하게 평가되었다. 5. 원심분리 테스트와 사이클링 테스트 결과 제조된 접착제 모두 분리와 성상의 변화가 없었다. 점도 측정에서는 스프리트 검에 비해 천연 성분으로 제조한 접착제가 점성이 높게 나타났다. 이 중에서 구아 검의 점성이 가장 높게 측정되었다. 6. 미용 분야에서 접착제를 사용하고 있는 전문가 집단을 대상으로 키토산, 카제인, 구아 검을 이용하여 제조한 접착제와 스프리트 검의 사용성을 평가한 결과 천연 성분을 이용한 접착제가 스프리트 검보다 발림성 항목을 제외한 접착성, 적용감, 지속성, 제거능 항목에서 사용성이 높게 평가 되었다.
이 연구에서 천연 성분을 이용하여 미용용 접착제를 제조하고 제조된 접착제를 시판제품과 비교한 결과 시판제품인 스프리트 검보다 항균, 안전성, 안정성, 성능 평가에 대해 우수한 결과를 확인하였다. 제조한 접착제 중 구아 검을 이용한 접착제가 안정성과 효능 평가 결과 가장 우수하게 나타나 개발 및 시판 가능성을 확인할 수 있었다.
Rosin and Colophony, the main ingredients of spirit gum, are often used to paste wigs and mustaches in the cosmetics industry. At the same time, however, they raise skin stimulation accompanied by some side effects like pains and allergy. Due to the side effects, the needs for alternative adhesives ...
Rosin and Colophony, the main ingredients of spirit gum, are often used to paste wigs and mustaches in the cosmetics industry. At the same time, however, they raise skin stimulation accompanied by some side effects like pains and allergy. Due to the side effects, the needs for alternative adhesives to reduce such side effects are gradually growing. To find out an alternative of the current adhesive; spirit gum, adhesives were manufactured with natural ingredients such as chitosan, casein and guar gum in this study. Thus, the manufactured adhesives were analyzed about their safety, efficacy and usability by comparison with the spirit gum to assess the possibility of the alternative. The adhesives were manufactured by combining adhesives base and natural ingredients. The components of the base were distilled water, thickener, antioxidant, silica, ethanol, and emulsifiers. With the base, three types of adhesives were manufactured by mixing the natural ingredients; chitosan, casein and guar gum. Several testing methods were performed to compare and evaluate the adhesives containing natural ingredients and the spirit gum in various areas. Firstly, Cell viability test by MTT-assay and patch test were conducted for safety evaluation. Secondly, centrifugation test was used for testing of cycling and viscosity. Thirdly, tensile strength experiment was done for performance evaluation. Lastly, the usability evaluation was performed by the likert scale and question to expert group as well.
The following are the evaluation results of the adhesives containing natural ingredients. 1. The composition of the manufactured adhesives is as below; At first, a base of adhesives was prepared. Phase A was made by dissolving NA-CMC(0.2g), EDTA-2NA(0.03g), Glycerin(3g), and PVA 14.8 g in D.I. water(70g). Phase B was made by combining Ethanol(9g), PYP-K30(0.5g), M.P(0.2g), Histoacryl(0.02g), and Polybutene(5g). The mixture of Phase A and B came out of the base of adhesives. And then, 5g of each chitosan, casein and guar gum were dissolved to the prepared base. For a comparable product, the sprit gum, known as a common adhesive for cosmetic, was selected. 2. The result of antimicrobial activity test on the comparable objects identified that the antimicrobial activity was occurred in the adhesive containing chitosan by creating clear zone, whereas this phenomenon was not appeared in other adhesives. 3. In the safety evaluation, it was resulted that the adhesives containing natural ingredients kept higher cell viability than the spirit gum. Among the manufactured products, adhesive containing guar gum showed the highest cell viability and it also showed the superior stability to others by MTT-assay test. By patch test, it was figured out that 2.4% of the spirit gum and 7.2% of chitosan reacted to allergy. Whereas, there was no allergy reaction in the adhesives containing casein and guar gum which means casein and guar gum adhesives had superior safety requirement to others. 4. Finding of tensile strength, it was indicated that all manufactured adhesives containing natural ingredients are showed tensile strength than the spirit gum. The adhesive containing guar gum was evaluated the most excellent product among the testing objects with the measure of 2.54±0.12 MPa which was the strongest of the tensile strength. 5. A centrifuge test and a cycling test were conducted to evaluate the formulation stability of the adhesives. It was observed that the adhesives containing natural ingredients had higher viscosity compared to the spirit gum. The adhesive containing guar gum had the highest viscosity among all tested products. Through the several positive results from the adhesive containing guar gum, it may be proposed to use the adhesive containing guar gum as the alternative of the spirit gum. 6. The usability evaluation was researched to an expert group who was using adhesives in the beauty industry. As a result of comparing usability of the spirit gum and the manufactured adhesives containing chitosan, casein and guar gum, it was identified that the adhesives containing natural ingredients were better on adhesiveness, application sense, persistence, and removability than the spirit gum. On the other hand, the spirit gum was researched as a better product on spreadability.
In conclusion, it is verified that the adhesives with containing natural ingredients have a comparable advantage on antimicrobial activity, cell viability, patch test and researched evaluation than the current commercial product; the spirit gum. The adhesive containing guar gum showed the highest performance result on safety and cell viability among all manufactured adhesives. Therefore, it may be suggested that the adhesive containing guar gum has a high possibility to replace the spirit gum for cosmetic purpose.
Rosin and Colophony, the main ingredients of spirit gum, are often used to paste wigs and mustaches in the cosmetics industry. At the same time, however, they raise skin stimulation accompanied by some side effects like pains and allergy. Due to the side effects, the needs for alternative adhesives to reduce such side effects are gradually growing. To find out an alternative of the current adhesive; spirit gum, adhesives were manufactured with natural ingredients such as chitosan, casein and guar gum in this study. Thus, the manufactured adhesives were analyzed about their safety, efficacy and usability by comparison with the spirit gum to assess the possibility of the alternative. The adhesives were manufactured by combining adhesives base and natural ingredients. The components of the base were distilled water, thickener, antioxidant, silica, ethanol, and emulsifiers. With the base, three types of adhesives were manufactured by mixing the natural ingredients; chitosan, casein and guar gum. Several testing methods were performed to compare and evaluate the adhesives containing natural ingredients and the spirit gum in various areas. Firstly, Cell viability test by MTT-assay and patch test were conducted for safety evaluation. Secondly, centrifugation test was used for testing of cycling and viscosity. Thirdly, tensile strength experiment was done for performance evaluation. Lastly, the usability evaluation was performed by the likert scale and question to expert group as well.
The following are the evaluation results of the adhesives containing natural ingredients. 1. The composition of the manufactured adhesives is as below; At first, a base of adhesives was prepared. Phase A was made by dissolving NA-CMC(0.2g), EDTA-2NA(0.03g), Glycerin(3g), and PVA 14.8 g in D.I. water(70g). Phase B was made by combining Ethanol(9g), PYP-K30(0.5g), M.P(0.2g), Histoacryl(0.02g), and Polybutene(5g). The mixture of Phase A and B came out of the base of adhesives. And then, 5g of each chitosan, casein and guar gum were dissolved to the prepared base. For a comparable product, the sprit gum, known as a common adhesive for cosmetic, was selected. 2. The result of antimicrobial activity test on the comparable objects identified that the antimicrobial activity was occurred in the adhesive containing chitosan by creating clear zone, whereas this phenomenon was not appeared in other adhesives. 3. In the safety evaluation, it was resulted that the adhesives containing natural ingredients kept higher cell viability than the spirit gum. Among the manufactured products, adhesive containing guar gum showed the highest cell viability and it also showed the superior stability to others by MTT-assay test. By patch test, it was figured out that 2.4% of the spirit gum and 7.2% of chitosan reacted to allergy. Whereas, there was no allergy reaction in the adhesives containing casein and guar gum which means casein and guar gum adhesives had superior safety requirement to others. 4. Finding of tensile strength, it was indicated that all manufactured adhesives containing natural ingredients are showed tensile strength than the spirit gum. The adhesive containing guar gum was evaluated the most excellent product among the testing objects with the measure of 2.54±0.12 MPa which was the strongest of the tensile strength. 5. A centrifuge test and a cycling test were conducted to evaluate the formulation stability of the adhesives. It was observed that the adhesives containing natural ingredients had higher viscosity compared to the spirit gum. The adhesive containing guar gum had the highest viscosity among all tested products. Through the several positive results from the adhesive containing guar gum, it may be proposed to use the adhesive containing guar gum as the alternative of the spirit gum. 6. The usability evaluation was researched to an expert group who was using adhesives in the beauty industry. As a result of comparing usability of the spirit gum and the manufactured adhesives containing chitosan, casein and guar gum, it was identified that the adhesives containing natural ingredients were better on adhesiveness, application sense, persistence, and removability than the spirit gum. On the other hand, the spirit gum was researched as a better product on spreadability.
In conclusion, it is verified that the adhesives with containing natural ingredients have a comparable advantage on antimicrobial activity, cell viability, patch test and researched evaluation than the current commercial product; the spirit gum. The adhesive containing guar gum showed the highest performance result on safety and cell viability among all manufactured adhesives. Therefore, it may be suggested that the adhesive containing guar gum has a high possibility to replace the spirit gum for cosmetic purpose.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.