Flexible OLED용 신규 발광 소재 및 전도성 고분자를 이용한 복합전극에 관한 연구 A Study on New Emitting Materials and Hybrid Electrodes using Conducting Polymer for Flexible OLED원문보기
본 연구에서는 거울상 이성질체를 가지는 신규 발광 물질 4,4'6,6’- Tetrabenzothiophenyl-2,2'-hexyloxy -1,1’-binaphthyl(4BzTP BNP OMe)을 합성하고 이를 발광층으로 사용하여 organic light-emitting diode(OLED) 소자를 제작하였다. 각각 enantiomerically pure상태와 ...
본 연구에서는 거울상 이성질체를 가지는 신규 발광 물질 4,4'6,6’- Tetrabenzothiophenyl-2,2'-hexyloxy -1,1’-binaphthyl(4BzTP BNP OMe)을 합성하고 이를 발광층으로 사용하여 organic light-emitting diode(OLED) 소자를 제작하였다. 각각 enantiomerically pure상태와 racemic mixture 상태의 발광물질의 물리적, 광학적, 전기화학적 특성을 분석하고, 각각 OLED 소자의 발광층으로 사용하여 이에 따른 전기발광 특성을 분석하였다. OLED 소자는 구조 최적화를 통해 [ITO/NPB(40 nm)/EML(30 nm)/TPBi(20 nm)/Bebq2(10nm)/ LiF(1 nm)/Al(100 nm)]의 구조로 제작하였으며, enantiomerically pure 발광물질을 사용한 소자와 racemic mixture 발광물질을 사용한 소자는 각각 486 nm(pure)와 475 nm(mixture)의 최대 발광파장을 가지는 청색발광을 보였다. Enantiomerically pure 발광물질을 사용한 소자(3.1 cd/A)에서 더 높은 전류효율과 휘도를 보이며 racemic mixture 발광물질을 사용한 소자(1.4 cd/A)와 전기발광특성의 차이를 보였다. 은 나노 와이어와 PEDOT: PSS를 복합화하고 전도성 고분자에 PFI를 도입함으로써 flexible OLED 제작에 적합한 특성을 갖는 전극을 제작하였다. 0.1 vol% PFI를 도입하여 제작된 전극은 550 nm 파장에서 89% 투과도와 50 Ω/□의 면저항, 그리고 5.77 eV의 일함수 특성을 나타내었다. PFI 함량에 따라 제작하고자 하는 OLED의 소자 구조에 맞게 전극의 일함수를 조절 할 수 있으며 전기전도성이 없는 PFI를 도입한다 하더라도 일함수 값 변화가 거의 최대에 이르는 0.5 vol% 에서도 플라스틱 기준 ITO와 유사한 면저항을 갖는다. 따라서 제작된 전극을 적용하여 flexible OLED를 제작 하였을 때 ITO를 사용한 flexible OLED 보다 기계적 내구성이 좋고 전극의 일함수 조절로 인한 높은 효율의 소자를 제작할 수 있을 것으로 생각된다.
본 연구에서는 거울상 이성질체를 가지는 신규 발광 물질 4,4'6,6’- Tetrabenzothiophenyl-2,2'-hexyloxy -1,1’-binaphthyl(4BzTP BNP OMe)을 합성하고 이를 발광층으로 사용하여 organic light-emitting diode(OLED) 소자를 제작하였다. 각각 enantiomerically pure상태와 racemic mixture 상태의 발광물질의 물리적, 광학적, 전기화학적 특성을 분석하고, 각각 OLED 소자의 발광층으로 사용하여 이에 따른 전기발광 특성을 분석하였다. OLED 소자는 구조 최적화를 통해 [ITO/NPB(40 nm)/EML(30 nm)/TPBi(20 nm)/Bebq2(10nm)/ LiF(1 nm)/Al(100 nm)]의 구조로 제작하였으며, enantiomerically pure 발광물질을 사용한 소자와 racemic mixture 발광물질을 사용한 소자는 각각 486 nm(pure)와 475 nm(mixture)의 최대 발광파장을 가지는 청색발광을 보였다. Enantiomerically pure 발광물질을 사용한 소자(3.1 cd/A)에서 더 높은 전류효율과 휘도를 보이며 racemic mixture 발광물질을 사용한 소자(1.4 cd/A)와 전기발광특성의 차이를 보였다. 은 나노 와이어와 PEDOT: PSS를 복합화하고 전도성 고분자에 PFI를 도입함으로써 flexible OLED 제작에 적합한 특성을 갖는 전극을 제작하였다. 0.1 vol% PFI를 도입하여 제작된 전극은 550 nm 파장에서 89% 투과도와 50 Ω/□의 면저항, 그리고 5.77 eV의 일함수 특성을 나타내었다. PFI 함량에 따라 제작하고자 하는 OLED의 소자 구조에 맞게 전극의 일함수를 조절 할 수 있으며 전기전도성이 없는 PFI를 도입한다 하더라도 일함수 값 변화가 거의 최대에 이르는 0.5 vol% 에서도 플라스틱 기준 ITO와 유사한 면저항을 갖는다. 따라서 제작된 전극을 적용하여 flexible OLED를 제작 하였을 때 ITO를 사용한 flexible OLED 보다 기계적 내구성이 좋고 전극의 일함수 조절로 인한 높은 효율의 소자를 제작할 수 있을 것으로 생각된다.
In this study, we analyzed physical, optical and electrochemical properties of the synthesized new emitting material, 4,4'6,6’- Tetrabenzothiophenyl-2,2'-hexyloxy -1,1’-binaphthyl(4BzTP BNP OMe) with optical isomerism. In addition, we fabricated organic light-emitting diodes (OLEDs) using enantiomer...
In this study, we analyzed physical, optical and electrochemical properties of the synthesized new emitting material, 4,4'6,6’- Tetrabenzothiophenyl-2,2'-hexyloxy -1,1’-binaphthyl(4BzTP BNP OMe) with optical isomerism. In addition, we fabricated organic light-emitting diodes (OLEDs) using enantiomerically pure molecules and racemic mixture of 4BzTP BNP OMe as an emitting layer. Through the optimization of OLED structure, the device was fabricated with a structure of [ITO/ NPB (40 nm)/ EML (30 nm)/ TPBi (20 nm)/ Bebq2 (10nm)/LiF (1 nm)/Al (100 nm)]. The OLED device with enantiomerically pure molecules and racemic mixture showed different EL properties. The maximum efficiency and luminance of the device with enantiomerically pure molecules (3.1 cd/A, 1700 cd/m2) are higher than that of the device with racemic mixture (1.4 cd/A, 1100 cd/m2). We fabricated flexible transparent electrodes with suitable properties for flexible OLED through comprising silver nanowire and PEDOT: PSS added perfluorinated ionomer (PFI). The polymer matrix provided not only high workfunction but also topographically and electrically uniform surface by filling the empty space in between the Ag nanowire networks. The fabricated electrode with 0.1 vol% of PFI gave outstanding opto-electrical properties with a surface resistance of ~50 Ω/□, transmittance of ~89% at 550 nm and workfunction of 5.77 eV. The workfunction of electrode can be controlled depending on PFI content according to the device structure of the OLED. Even if PFI introduced, the electrode has similar sheet resistance with a plastic based ITO. Therefore, we consider that we can fabricate OLED using the hybrid electrode with good mechanical durability and high efficiency.
In this study, we analyzed physical, optical and electrochemical properties of the synthesized new emitting material, 4,4'6,6’- Tetrabenzothiophenyl-2,2'-hexyloxy -1,1’-binaphthyl(4BzTP BNP OMe) with optical isomerism. In addition, we fabricated organic light-emitting diodes (OLEDs) using enantiomerically pure molecules and racemic mixture of 4BzTP BNP OMe as an emitting layer. Through the optimization of OLED structure, the device was fabricated with a structure of [ITO/ NPB (40 nm)/ EML (30 nm)/ TPBi (20 nm)/ Bebq2 (10nm)/LiF (1 nm)/Al (100 nm)]. The OLED device with enantiomerically pure molecules and racemic mixture showed different EL properties. The maximum efficiency and luminance of the device with enantiomerically pure molecules (3.1 cd/A, 1700 cd/m2) are higher than that of the device with racemic mixture (1.4 cd/A, 1100 cd/m2). We fabricated flexible transparent electrodes with suitable properties for flexible OLED through comprising silver nanowire and PEDOT: PSS added perfluorinated ionomer (PFI). The polymer matrix provided not only high workfunction but also topographically and electrically uniform surface by filling the empty space in between the Ag nanowire networks. The fabricated electrode with 0.1 vol% of PFI gave outstanding opto-electrical properties with a surface resistance of ~50 Ω/□, transmittance of ~89% at 550 nm and workfunction of 5.77 eV. The workfunction of electrode can be controlled depending on PFI content according to the device structure of the OLED. Even if PFI introduced, the electrode has similar sheet resistance with a plastic based ITO. Therefore, we consider that we can fabricate OLED using the hybrid electrode with good mechanical durability and high efficiency.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.