닌히드린 작업용액의 보존연한에 따른 잠재지문 현출능력 비교 및 새로운 이송용매에 관한 연구 The shelf life study of the fingermark developing ninhydrin working solution, and formulation of new carrier solvent원문보기
닌히드린은 다공성 표면에 남은 잠재지문을 현출하는 아미노산 감응성 시약이며, 단독으로 사용하지 않고 이송용매에 녹여 사용하고 있다. 현재 이 이송용매의 성분이나 적용 방법, aging에 대해서는 많은 연구가 이루어지고 있으나 보존연한에 대한 연구는 거의 미비한 편이다. 따라서 본 연구에서는 인공표준지문을 이용하여 닌히드린 작업용액에 사용되는 이송용매의 보존연한을 비교하였다. FBI에서 발간된 “Processing Guide for Developing ...
닌히드린은 다공성 표면에 남은 잠재지문을 현출하는 아미노산 감응성 시약이며, 단독으로 사용하지 않고 이송용매에 녹여 사용하고 있다. 현재 이 이송용매의 성분이나 적용 방법, aging에 대해서는 많은 연구가 이루어지고 있으나 보존연한에 대한 연구는 거의 미비한 편이다. 따라서 본 연구에서는 인공표준지문을 이용하여 닌히드린 작업용액에 사용되는 이송용매의 보존연한을 비교하였다. FBI에서 발간된 “Processing Guide for Developing Latent Prints”나 NCFS의 “Fingermark Detection & Enhancement”에 따르면 아세톤과 석유 에테르, HFE-7100 (CAST)를 기반으로 하는 닌히드린 작업용액의 보존연한은 각 1년, HFE-7100 (AFP)를 기반으로 하는 닌히드린 작업용액의 보존연한은 6개월로 제시되어 있다. 따라서 닌히드린 작업용액의 제조에 널리 사용되는 아세톤, 석유 에테르, HFE-7100과 메틸 삼차 부틸 에테르, PF-5060을 기반으로 하는 닌히드린 작업용액의 보존연한에 따른 잠재지문 현출 능력을 인공땀을 채운 잉크젯카트리지로 출력한 인공 표준 잠재지문을 사용하여 비교하였다. 메틸 삼차 부틸 에테르와 PF-5060을 기반으로 하는 닌히드린 작업용액은 제조한 후 1개월 이내, 석유 에테르, 아세트산이 첨가된 석유 에테르를 기반으로 하는 닌히드린 작업용액은 제조한 후 2개월 이내, 아세톤을 기반으로 하는 닌히드린 작업용액은 제조한 후 3개월 이내, 아세트산이 첨가된 아세톤, AFP에서 제시한 방법으로 제조한 HFE-7100을 기반으로 하는 닌히드린 작업용액은 4개월 이내, CAST에서 제시한 방법으로 제조한 HFE-7100을 기반으로 하는 닌히드린 작업용액은 5개월 이내에 사용해야 같은 품질의 잠재지문을 현출할 수 있다. 이송용매별로 차이는 있지만, 문헌에 제시된 보존연한보다는 최적으로 사용할 수 있는 기간이 짧았다. 닌히드린 작업용액으로 현출한 잠재지문은 이송용매에 따른 차이없이 6개월까지는 색이 바래는 현상 없이 처음 상태를 유지하였다. 또한, 잉크 용해도 실험 결과 아세톤은 실험에 사용한 모든 필기구의 잉크를 용해하였으며, HFE-7100은 모든 필기구에서 잉크를 용해하지 않았다. 닌히드린 작업용액의 이송용매로 처음 사용한 메틸 삼차 부틸 에테르는 석유 에테르를 기반으로 하는 닌히드린 작업용액과 비슷한 감도로 잠재지문을 현출하고, 잉크 용해도도 비슷하였으며, 아세톤을 기반으로 하는 닌히드린 작업용액처럼 제조방법이 간단한 장점이 있다.
닌히드린은 다공성 표면에 남은 잠재지문을 현출하는 아미노산 감응성 시약이며, 단독으로 사용하지 않고 이송용매에 녹여 사용하고 있다. 현재 이 이송용매의 성분이나 적용 방법, aging에 대해서는 많은 연구가 이루어지고 있으나 보존연한에 대한 연구는 거의 미비한 편이다. 따라서 본 연구에서는 인공표준지문을 이용하여 닌히드린 작업용액에 사용되는 이송용매의 보존연한을 비교하였다. FBI에서 발간된 “Processing Guide for Developing Latent Prints”나 NCFS의 “Fingermark Detection & Enhancement”에 따르면 아세톤과 석유 에테르, HFE-7100 (CAST)를 기반으로 하는 닌히드린 작업용액의 보존연한은 각 1년, HFE-7100 (AFP)를 기반으로 하는 닌히드린 작업용액의 보존연한은 6개월로 제시되어 있다. 따라서 닌히드린 작업용액의 제조에 널리 사용되는 아세톤, 석유 에테르, HFE-7100과 메틸 삼차 부틸 에테르, PF-5060을 기반으로 하는 닌히드린 작업용액의 보존연한에 따른 잠재지문 현출 능력을 인공땀을 채운 잉크젯 카트리지로 출력한 인공 표준 잠재지문을 사용하여 비교하였다. 메틸 삼차 부틸 에테르와 PF-5060을 기반으로 하는 닌히드린 작업용액은 제조한 후 1개월 이내, 석유 에테르, 아세트산이 첨가된 석유 에테르를 기반으로 하는 닌히드린 작업용액은 제조한 후 2개월 이내, 아세톤을 기반으로 하는 닌히드린 작업용액은 제조한 후 3개월 이내, 아세트산이 첨가된 아세톤, AFP에서 제시한 방법으로 제조한 HFE-7100을 기반으로 하는 닌히드린 작업용액은 4개월 이내, CAST에서 제시한 방법으로 제조한 HFE-7100을 기반으로 하는 닌히드린 작업용액은 5개월 이내에 사용해야 같은 품질의 잠재지문을 현출할 수 있다. 이송용매별로 차이는 있지만, 문헌에 제시된 보존연한보다는 최적으로 사용할 수 있는 기간이 짧았다. 닌히드린 작업용액으로 현출한 잠재지문은 이송용매에 따른 차이없이 6개월까지는 색이 바래는 현상 없이 처음 상태를 유지하였다. 또한, 잉크 용해도 실험 결과 아세톤은 실험에 사용한 모든 필기구의 잉크를 용해하였으며, HFE-7100은 모든 필기구에서 잉크를 용해하지 않았다. 닌히드린 작업용액의 이송용매로 처음 사용한 메틸 삼차 부틸 에테르는 석유 에테르를 기반으로 하는 닌히드린 작업용액과 비슷한 감도로 잠재지문을 현출하고, 잉크 용해도도 비슷하였으며, 아세톤을 기반으로 하는 닌히드린 작업용액처럼 제조방법이 간단한 장점이 있다.
Ninhydrin is an amino acid sensitive reagent to develop the latent fingermark remaining on the porous surface, and some carrier solvents are required for the formulation on the working solution. The optimal formulation and applying method of the ninhydrin working solution had been studied by many pr...
Ninhydrin is an amino acid sensitive reagent to develop the latent fingermark remaining on the porous surface, and some carrier solvents are required for the formulation on the working solution. The optimal formulation and applying method of the ninhydrin working solution had been studied by many previous researchers. However, in the limitation of the author’s knowledge, the researches on the shelf life is limited. Therefore, the shelf life of the ninhydrin formulation had studied using artificial latent fingermark. According to "Processing Guide for Developing Latent Prints" of the FBI and "Fingermark Detection & Enhancement" of the NCFS, the shelf life of the ninhydrin working solution based on acetone, petroleum ether and HFE-7100 (CAST) is each 1 year and another reagent based on HFE-7100 (AFP) is 6 months. Therefore, the capability of developing latent fingermark ninhydrin working solution, based on acetone, petroleum ether, HFE-7100, methyl tert-butyl ether and PF-5060, was compared using the artificial latent fingermark printed with the inkjet print filled with the artificial sweat. The shelf life of the ninhydrin working solution formulated with methyl tert-butyl ether and PF-5060 was 1 month, formulated with petroleum ether and petroleum ether, acetic acid was 2 months, formulated with acetone was 3 months, formulated with acetone, acetic acid and HFE-7100 by AFP was 4 months, and formulated with HFE-7100 by CAST was 5 months. The shelf lives measured from this research were shorter than that in the literature. Regardless of the carrier solvent, latent fingermark developed by various ninhydrin working solution was maintained its original state up to 6 months without fading. Further, as a result of the solubility test of the ink, acetone dissolved all the ink of writing tools using the test, while the HFE-7100 didn’t dissolve all the ink. The solubility of ink and the intensities methyl tert-butyl ether formulation developed latent fingermark were similar to the petroleum ether formulation developed latent fingermark. The ease of preparation is another benefit of methyl tert-butyl ether formulation.
Ninhydrin is an amino acid sensitive reagent to develop the latent fingermark remaining on the porous surface, and some carrier solvents are required for the formulation on the working solution. The optimal formulation and applying method of the ninhydrin working solution had been studied by many previous researchers. However, in the limitation of the author’s knowledge, the researches on the shelf life is limited. Therefore, the shelf life of the ninhydrin formulation had studied using artificial latent fingermark. According to "Processing Guide for Developing Latent Prints" of the FBI and "Fingermark Detection & Enhancement" of the NCFS, the shelf life of the ninhydrin working solution based on acetone, petroleum ether and HFE-7100 (CAST) is each 1 year and another reagent based on HFE-7100 (AFP) is 6 months. Therefore, the capability of developing latent fingermark ninhydrin working solution, based on acetone, petroleum ether, HFE-7100, methyl tert-butyl ether and PF-5060, was compared using the artificial latent fingermark printed with the inkjet print filled with the artificial sweat. The shelf life of the ninhydrin working solution formulated with methyl tert-butyl ether and PF-5060 was 1 month, formulated with petroleum ether and petroleum ether, acetic acid was 2 months, formulated with acetone was 3 months, formulated with acetone, acetic acid and HFE-7100 by AFP was 4 months, and formulated with HFE-7100 by CAST was 5 months. The shelf lives measured from this research were shorter than that in the literature. Regardless of the carrier solvent, latent fingermark developed by various ninhydrin working solution was maintained its original state up to 6 months without fading. Further, as a result of the solubility test of the ink, acetone dissolved all the ink of writing tools using the test, while the HFE-7100 didn’t dissolve all the ink. The solubility of ink and the intensities methyl tert-butyl ether formulation developed latent fingermark were similar to the petroleum ether formulation developed latent fingermark. The ease of preparation is another benefit of methyl tert-butyl ether formulation.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.