태양광전원과 전기저장장치가 연계된 복합배전계통에 있어서 저압측 전압 특성에 관한 연구 A Study on the Characteristics of Secondly Voltage in Complex Distribution System With PV System and Energy Storage System원문보기
최근 정부에서는 차세대 성장 동력 산업의 하나로서 녹색성장 정책을 추진하여, 2030년까지 신재생 에너지전원의 비중을 전체 에너지전원의 11% 정도로 확대하는 보급 사업을 적극적으로 수행하고 있다. 이러한 신재생에너지 전원의 활성화 방안에 따라 지자체와 신재생 에너지 발전사업 자를 중심으로 대용량 태양광전원을 배전계통에 활발하게 연계하고 있는 실정이다. 하지만, 태양광전원이 배전계통에 도입되어 운용되는 경우, 급격한 출력변동에 의하여 저압측 전압은 규정치를 벗어날 염려가 있다. 이를 해결하기 위하여, 세계 각국의 전력회사에서는 태양광전원이 연계된 배전계통에 선로전압조정장치(step voltage regulator : ...
최근 정부에서는 차세대 성장 동력 산업의 하나로서 녹색성장 정책을 추진하여, 2030년까지 신재생 에너지전원의 비중을 전체 에너지전원의 11% 정도로 확대하는 보급 사업을 적극적으로 수행하고 있다. 이러한 신재생에너지 전원의 활성화 방안에 따라 지자체와 신재생 에너지 발전사업 자를 중심으로 대용량 태양광전원을 배전계통에 활발하게 연계하고 있는 실정이다. 하지만, 태양광전원이 배전계통에 도입되어 운용되는 경우, 급격한 출력변동에 의하여 저압측 전압은 규정치를 벗어날 염려가 있다. 이를 해결하기 위하여, 세계 각국의 전력회사에서는 태양광전원이 연계된 배전계통에 선로전압조정장치(step voltage regulator : SVR)를 설치하여 수용가의 전압을 적정한 범위로 유지시키고 있다. 하지만 이 방법은 미리 설정된 지연시간(30~180초) 이후에 탭이 동작하는 특성에 의하여, 지연시 간동안 저압측 전압은 규정치를 벗어날 가능성이 존재한다.[1-5] 따라서 본 논문에서는 수용가 전압이 규정치를 벗어날 가능성이 있는 지연시간 동안 전기저장장치(Energy Storage System: ESS)를 도입하여 운용하는 방안을 제시하고, 복합배전계통 모의장치를 구현하며 이를 바탕 으로 배전계통의 상용소프트웨어인 PSCAD/EMTDC를 이용하여 모델링을 수행하였다. 상기의 시험장치와 모델링을 바탕으로 배전계통에 SVR과 ESS운용에 따른 저압측 전압 특성을 시나리오별로 분석한다. 구체적으로 PSCAD/EMTDC를 이용하여 배전계통과 SVR 그리고 ESS를 모델링하 고, 실 배전계통을 1/100로 축약한 복합배전계통 모의장치를 설계 및 구현하여, SVR과 ESS 운용에 따른 저압측 전압을 분석한다. 상기의 시험 장치에 의한 시험 및 시뮬레이션 결과에 의하면, 저압측 전압이 규정치 이내로 항상 유지되어, 본 논문에서 제안한 운용방안이 전압조정에 유용 함을 확인하였다.
최근 정부에서는 차세대 성장 동력 산업의 하나로서 녹색성장 정책을 추진하여, 2030년까지 신재생 에너지전원의 비중을 전체 에너지전원의 11% 정도로 확대하는 보급 사업을 적극적으로 수행하고 있다. 이러한 신재생에너지 전원의 활성화 방안에 따라 지자체와 신재생 에너지 발전사업 자를 중심으로 대용량 태양광전원을 배전계통에 활발하게 연계하고 있는 실정이다. 하지만, 태양광전원이 배전계통에 도입되어 운용되는 경우, 급격한 출력변동에 의하여 저압측 전압은 규정치를 벗어날 염려가 있다. 이를 해결하기 위하여, 세계 각국의 전력회사에서는 태양광전원이 연계된 배전계통에 선로전압조정장치(step voltage regulator : SVR)를 설치하여 수용가의 전압을 적정한 범위로 유지시키고 있다. 하지만 이 방법은 미리 설정된 지연시간(30~180초) 이후에 탭이 동작하는 특성에 의하여, 지연시 간동안 저압측 전압은 규정치를 벗어날 가능성이 존재한다.[1-5] 따라서 본 논문에서는 수용가 전압이 규정치를 벗어날 가능성이 있는 지연시간 동안 전기저장장치(Energy Storage System: ESS)를 도입하여 운용하는 방안을 제시하고, 복합배전계통 모의장치를 구현하며 이를 바탕 으로 배전계통의 상용소프트웨어인 PSCAD/EMTDC를 이용하여 모델링을 수행하였다. 상기의 시험장치와 모델링을 바탕으로 배전계통에 SVR과 ESS운용에 따른 저압측 전압 특성을 시나리오별로 분석한다. 구체적으로 PSCAD/EMTDC를 이용하여 배전계통과 SVR 그리고 ESS를 모델링하 고, 실 배전계통을 1/100로 축약한 복합배전계통 모의장치를 설계 및 구현하여, SVR과 ESS 운용에 따른 저압측 전압을 분석한다. 상기의 시험 장치에 의한 시험 및 시뮬레이션 결과에 의하면, 저압측 전압이 규정치 이내로 항상 유지되어, 본 논문에서 제안한 운용방안이 전압조정에 유용 함을 확인하였다.
In order to maintain customer voltage within allowable limit(220±13V), tap operation of SVR(Step Voltage Regulator) installed in distribution system could be carried out according to the scheduled delay time(30~180sec) of SVR. However, the compensation of ESS(Energy Storage System) during the delay ...
In order to maintain customer voltage within allowable limit(220±13V), tap operation of SVR(Step Voltage Regulator) installed in distribution system could be carried out according to the scheduled delay time(30~180sec) of SVR. However, the compensation of ESS(Energy Storage System) during the delay time of SVR is being required because the customer voltages in distribution system interconnected with PV system have a difficultly to be kept within allowable limit. In this paper, during the delay time that is likely to suyongga voltage outside the specified value electrical storage devices (Energy Storage System: ESS) presented a plan to operate by introducing and implements a complex distribution system simulator PSCAD / EMTDC based on this the modeling was done by using it to the distribution system on the basis of modeling of the test apparatus and the analysis of the low-voltage side voltage characteristics according to the ESS and SVR by operational scenario. According to the test, and the simulation result of the test of the device, the low-pressure-side voltage is always kept within the specified value, it was confirmed that the operating scheme proposed in this paper useful in the adjustment voltage.
In order to maintain customer voltage within allowable limit(220±13V), tap operation of SVR(Step Voltage Regulator) installed in distribution system could be carried out according to the scheduled delay time(30~180sec) of SVR. However, the compensation of ESS(Energy Storage System) during the delay time of SVR is being required because the customer voltages in distribution system interconnected with PV system have a difficultly to be kept within allowable limit. In this paper, during the delay time that is likely to suyongga voltage outside the specified value electrical storage devices (Energy Storage System: ESS) presented a plan to operate by introducing and implements a complex distribution system simulator PSCAD / EMTDC based on this the modeling was done by using it to the distribution system on the basis of modeling of the test apparatus and the analysis of the low-voltage side voltage characteristics according to the ESS and SVR by operational scenario. According to the test, and the simulation result of the test of the device, the low-pressure-side voltage is always kept within the specified value, it was confirmed that the operating scheme proposed in this paper useful in the adjustment voltage.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.