역사적으로 독성가스는 과거 펠로폰네소스 전쟁에서부터 현재 말레이시아 암살 사건까지 전쟁 및 테러 수단으로 수 없이 인간을 위협하고 있다. 현재 독성가스 제거는 보편적으로 유기화합물 흡착성능이 뛰어난 다공성의 활성탄을 사용하고 있으며, 복합 독성가스를 제거하기 위하여 활성탄에 여러 물질을 첨착하는 연구가 진행되고 있다. 본 논문은 미군용 정화통 흡착제로 사용되는 ASZM-TEDA의 제조방법을 응용하여 대조군(...
역사적으로 독성가스는 과거 펠로폰네소스 전쟁에서부터 현재 말레이시아 암살 사건까지 전쟁 및 테러 수단으로 수 없이 인간을 위협하고 있다. 현재 독성가스 제거는 보편적으로 유기화합물 흡착성능이 뛰어난 다공성의 활성탄을 사용하고 있으며, 복합 독성가스를 제거하기 위하여 활성탄에 여러 물질을 첨착하는 연구가 진행되고 있다. 본 논문은 미군용 정화통 흡착제로 사용되는 ASZM-TEDA의 제조방법을 응용하여 대조군(ASC 첨착활성탄)보다 독성가스 테러시, 개인 및 집단의 호흡기를 좀 더 장시간 보호해 줄 첨착활성탄에 대하여 연구를 수행하였다. ASZM은 여러 함침방법으로 Cu, Ag, Zn 및 Mo 전구체를 활성탄에 첨착하여 제조하였다. 그리고 제조된 ASZM에 TEDA(Triethylenediamine), Au, Fe, Co 또는 Ni 전구체을 추가로 첨착였다. 전자현미경, ICP, XRD 및 BET비표면적 분석기기를 사용하여 물성조사를 수행하였고, 첨착활성탄의 흡착성능은 기상흐름흡착장치를 사용하였다. 이때, 사용된 가스는 GB화학작용제의 모의가스인 DMMP(Dimethyl methyl phosphonate)와 CK 화학작용제의 모의가스인 HCl(Hydrogen chloride)이었다. 제조한 ASZM의 물성조사 결과, 40~50μm이하의 좁은 슬릿형 미세기공을 갖고 있었고, 함침용액의 Mo 함량보다 첨착량은 낮았지만 대체로 Cu, Ag 및 Zn는 첨착이 잘되었다. XRD pattern에서 Cu와 Zn는 결정성이 나타나지 않았고, Ag과 Mo은 AgNO3와 MoO의 형태로 각각 존재하였다. DMMP 흡착성능은 증류수 정제 야자계 활성탄을 사용하여 pH를 조절하지 않은 함침용액에 초기습식법으로 함침 후 건조만 수행한 ASZM이 대조군보다 약 20% 뛰어났다. 그리고 이들 ASZM에 Au를 1wt% 첨착하면 기존 ASZM보다 약 15% 더 향상되었다. HCl 흡착성능은 ASZM에 Fe를 4wt% 첨착할 때, 대조군보다 약 150% 더 뛰어났다. 결과적으로, 제조한 첨착활성탄들의 DMMP 흡착은 Au의 첨착에 영향을 받았고, HCl 흡착은 Fe의 첨착에 영향을 받았다. 그리고 이들 모두 대조군보다 흡착성능이 뛰어났다. 따라서 GB와 CK 화학작용제의 흡착제로 개인 및 집단의 호흡기를 대조군보다 장시간 보호가 가능하여 대체 제품으로 사용이 가능할 것이다
역사적으로 독성가스는 과거 펠로폰네소스 전쟁에서부터 현재 말레이시아 암살 사건까지 전쟁 및 테러 수단으로 수 없이 인간을 위협하고 있다. 현재 독성가스 제거는 보편적으로 유기화합물 흡착성능이 뛰어난 다공성의 활성탄을 사용하고 있으며, 복합 독성가스를 제거하기 위하여 활성탄에 여러 물질을 첨착하는 연구가 진행되고 있다. 본 논문은 미군용 정화통 흡착제로 사용되는 ASZM-TEDA의 제조방법을 응용하여 대조군(ASC 첨착활성탄)보다 독성가스 테러시, 개인 및 집단의 호흡기를 좀 더 장시간 보호해 줄 첨착활성탄에 대하여 연구를 수행하였다. ASZM은 여러 함침방법으로 Cu, Ag, Zn 및 Mo 전구체를 활성탄에 첨착하여 제조하였다. 그리고 제조된 ASZM에 TEDA(Triethylenediamine), Au, Fe, Co 또는 Ni 전구체을 추가로 첨착였다. 전자현미경, ICP, XRD 및 BET비표면적 분석기기를 사용하여 물성조사를 수행하였고, 첨착활성탄의 흡착성능은 기상흐름흡착장치를 사용하였다. 이때, 사용된 가스는 GB화학작용제의 모의가스인 DMMP(Dimethyl methyl phosphonate)와 CK 화학작용제의 모의가스인 HCl(Hydrogen chloride)이었다. 제조한 ASZM의 물성조사 결과, 40~50μm이하의 좁은 슬릿형 미세기공을 갖고 있었고, 함침용액의 Mo 함량보다 첨착량은 낮았지만 대체로 Cu, Ag 및 Zn는 첨착이 잘되었다. XRD pattern에서 Cu와 Zn는 결정성이 나타나지 않았고, Ag과 Mo은 AgNO3와 MoO의 형태로 각각 존재하였다. DMMP 흡착성능은 증류수 정제 야자계 활성탄을 사용하여 pH를 조절하지 않은 함침용액에 초기습식법으로 함침 후 건조만 수행한 ASZM이 대조군보다 약 20% 뛰어났다. 그리고 이들 ASZM에 Au를 1wt% 첨착하면 기존 ASZM보다 약 15% 더 향상되었다. HCl 흡착성능은 ASZM에 Fe를 4wt% 첨착할 때, 대조군보다 약 150% 더 뛰어났다. 결과적으로, 제조한 첨착활성탄들의 DMMP 흡착은 Au의 첨착에 영향을 받았고, HCl 흡착은 Fe의 첨착에 영향을 받았다. 그리고 이들 모두 대조군보다 흡착성능이 뛰어났다. 따라서 GB와 CK 화학작용제의 흡착제로 개인 및 집단의 호흡기를 대조군보다 장시간 보호가 가능하여 대체 제품으로 사용이 가능할 것이다
Historically, toxic gases as a means of war and terrorism have threatened humans, from the Peloponesian war to the Assassination of Malaysia. At present, toxic gas removal used porous activated carbon, which is generally excellent in adsorption of organic compounds. Various impregnation materials to...
Historically, toxic gases as a means of war and terrorism have threatened humans, from the Peloponesian war to the Assassination of Malaysia. At present, toxic gas removal used porous activated carbon, which is generally excellent in adsorption of organic compounds. Various impregnation materials to activated carbon to remove toxic gases is searching. In this study, impregnated activated carbon for protecting the respiratory system of individuals and groups for a longer time than the control group(ASC impregnated activated carbon) from terrorism of toxic gases was studied. ASZM was prepared by impregnating Cu, Ag, Zn and Mo precursors on activated carbon by various impregnation methods. Prepared ASZM was modified by adding with TEDA(Triethylenediamine), Au, Fe, Co or Ni precursor. The electron microscopy, ICP, XRD, and BET specific surface area analyzer were used to investigate physical properties of impregnated activated carbons. Adsorption performance of impregnated activated carbons was investigated with using a gas phase flow adsorption system. DMMP(Dimethyl methylphosphonate) and HCl(Hydrogen chloride) were used as model gas. As a result of physical property of the prepared ASZM, it had narrow slit-type micropores of 40μm to 50μm or less. The amount of Mo was low, and Cu, Ag, and Zn were generally well impregnated. In the XRD pattern, Cu and Zn did not indicate crystallinity. Ag and Mo existed in the form of AgNO3 and MoO, respectively. The adsorption performance of DMMP was about 20% better than ASZM prepared by the incipient wetness method using coconut activated carbon purified with distilled water. When 1wt% of Au was impregnated to ASZM, the Au(1wt%)/ASZM was improved by about 15% compared to the ASZM, and the HCl adsorption performance was superior to that of the control group by about 150% when 4wt% of Fe was impregnated to ASZM. As a result, DMMP adsorption and HCl adsorption on the impregnated activated acrbon were affected by Au impregnation and Fe impregnation, respectively. The adsorption of toxic gases performance for Au(1wt%)/ASZM and Fe(4wt%)/ASZM was superior to that of the control groups. Consequentially, prepared impregnated activated carbons can protect the respiration system of individuals and groups from GB and CK chemical agents for a longer time than the control group. So it can be used as an alternative product.
Historically, toxic gases as a means of war and terrorism have threatened humans, from the Peloponesian war to the Assassination of Malaysia. At present, toxic gas removal used porous activated carbon, which is generally excellent in adsorption of organic compounds. Various impregnation materials to activated carbon to remove toxic gases is searching. In this study, impregnated activated carbon for protecting the respiratory system of individuals and groups for a longer time than the control group(ASC impregnated activated carbon) from terrorism of toxic gases was studied. ASZM was prepared by impregnating Cu, Ag, Zn and Mo precursors on activated carbon by various impregnation methods. Prepared ASZM was modified by adding with TEDA(Triethylenediamine), Au, Fe, Co or Ni precursor. The electron microscopy, ICP, XRD, and BET specific surface area analyzer were used to investigate physical properties of impregnated activated carbons. Adsorption performance of impregnated activated carbons was investigated with using a gas phase flow adsorption system. DMMP(Dimethyl methylphosphonate) and HCl(Hydrogen chloride) were used as model gas. As a result of physical property of the prepared ASZM, it had narrow slit-type micropores of 40μm to 50μm or less. The amount of Mo was low, and Cu, Ag, and Zn were generally well impregnated. In the XRD pattern, Cu and Zn did not indicate crystallinity. Ag and Mo existed in the form of AgNO3 and MoO, respectively. The adsorption performance of DMMP was about 20% better than ASZM prepared by the incipient wetness method using coconut activated carbon purified with distilled water. When 1wt% of Au was impregnated to ASZM, the Au(1wt%)/ASZM was improved by about 15% compared to the ASZM, and the HCl adsorption performance was superior to that of the control group by about 150% when 4wt% of Fe was impregnated to ASZM. As a result, DMMP adsorption and HCl adsorption on the impregnated activated acrbon were affected by Au impregnation and Fe impregnation, respectively. The adsorption of toxic gases performance for Au(1wt%)/ASZM and Fe(4wt%)/ASZM was superior to that of the control groups. Consequentially, prepared impregnated activated carbons can protect the respiration system of individuals and groups from GB and CK chemical agents for a longer time than the control group. So it can be used as an alternative product.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.