이 연구는 정강이신경(peroneal nerve)과 같이 여러 분기를 갖는 신경이 손상되었을 때 손상된 신경을 완벽하게 재건하기 위해서, 여러 개의 분기를 갖는 신경유도관 제작기술과 신경세포의 증식과 분화를 증진시키기 위한 pore/non-pore/pore layer를 벽으로 갖는 여러 분기를 갖는 신경유도관 제작방법을 개발하였다. pore/non-pore/pore 구조에서, 기공층(pore layer)을 만들기 위해 생분해성고분자인 PCL (polycaprolactone)과 수용성고분자인 PEO (polyethylene oxide)를 이용하여 PCL/PEO filament를 제작했으며, 기공이 없는 층(non-pore layer)은 순수 PCL을 이용하여 제작된 PCL filament를 이용하여 제작했다. 제작된 pore/non-pore/pore 구조의 여러 개의 분기를 갖는 신경유도관은 ...
이 연구는 정강이신경(peroneal nerve)과 같이 여러 분기를 갖는 신경이 손상되었을 때 손상된 신경을 완벽하게 재건하기 위해서, 여러 개의 분기를 갖는 신경유도관 제작기술과 신경세포의 증식과 분화를 증진시키기 위한 pore/non-pore/pore layer를 벽으로 갖는 여러 분기를 갖는 신경유도관 제작방법을 개발하였다. pore/non-pore/pore 구조에서, 기공층(pore layer)을 만들기 위해 생분해성고분자인 PCL (polycaprolactone)과 수용성고분자인 PEO (polyethylene oxide)를 이용하여 PCL/PEO filament를 제작했으며, 기공이 없는 층(non-pore layer)은 순수 PCL을 이용하여 제작된 PCL filament를 이용하여 제작했다. 제작된 pore/non-pore/pore 구조의 여러 개의 분기를 갖는 신경유도관은 SEM (scanning electron microscope)을 이용하여 표면과 단면을 분석하였으며, 표면과 단면에서 PEO에 의해 형성된 기공과 ~3㎛의 미세 섬유를 확인할 수 있었다. 또한 개발된 여러 개의 분기를 갖는 신경유도관의 신경세포 거동 평가를 위해서, 쥐에서 유래된 신경아교세포(glial cell, C6)를 이용하여 pore/non-pore/pore layer를 갖는 여러 분기의 신경유도관과 non-pore layer를 갖는 여러 분기의 신경유도관에서 각각 세포거동능력을 평가하여 비교하였다. C6 신경아교세포를 이용한 in-vitro 실험에서 CCK-8 assay와 live and dead 그리고 신경세포의 분화를 평가하는 anti-MAP2 antibody를 이용한 세포실험결과, 여러 분기를 갖는 신경유도관중 pore/non-pore/pore 구조가 non-pore 구조보다 더 좋은 세포거동능력을 보여주었으며, 신경세포의 분화 또한 활발하게 이루어진 것을 확인 할 수 있었다.
이 연구는 정강이신경(peroneal nerve)과 같이 여러 분기를 갖는 신경이 손상되었을 때 손상된 신경을 완벽하게 재건하기 위해서, 여러 개의 분기를 갖는 신경유도관 제작기술과 신경세포의 증식과 분화를 증진시키기 위한 pore/non-pore/pore layer를 벽으로 갖는 여러 분기를 갖는 신경유도관 제작방법을 개발하였다. pore/non-pore/pore 구조에서, 기공층(pore layer)을 만들기 위해 생분해성고분자인 PCL (polycaprolactone)과 수용성고분자인 PEO (polyethylene oxide)를 이용하여 PCL/PEO filament를 제작했으며, 기공이 없는 층(non-pore layer)은 순수 PCL을 이용하여 제작된 PCL filament를 이용하여 제작했다. 제작된 pore/non-pore/pore 구조의 여러 개의 분기를 갖는 신경유도관은 SEM (scanning electron microscope)을 이용하여 표면과 단면을 분석하였으며, 표면과 단면에서 PEO에 의해 형성된 기공과 ~3㎛의 미세 섬유를 확인할 수 있었다. 또한 개발된 여러 개의 분기를 갖는 신경유도관의 신경세포 거동 평가를 위해서, 쥐에서 유래된 신경아교세포(glial cell, C6)를 이용하여 pore/non-pore/pore layer를 갖는 여러 분기의 신경유도관과 non-pore layer를 갖는 여러 분기의 신경유도관에서 각각 세포거동능력을 평가하여 비교하였다. C6 신경아교세포를 이용한 in-vitro 실험에서 CCK-8 assay와 live and dead 그리고 신경세포의 분화를 평가하는 anti-MAP2 antibody를 이용한 세포실험결과, 여러 분기를 갖는 신경유도관중 pore/non-pore/pore 구조가 non-pore 구조보다 더 좋은 세포거동능력을 보여주었으며, 신경세포의 분화 또한 활발하게 이루어진 것을 확인 할 수 있었다.
in this study, we proposed the multi-branched nerve guide conduit fabrication method for nerve regeneration such as peroneal nerve. the multi-branched nerve guide conduit has multi-layer structure which is pore/non-pore/pore layer. PCL/PEO filament was fabricated using PCL (polycaprolactone) and PEO...
in this study, we proposed the multi-branched nerve guide conduit fabrication method for nerve regeneration such as peroneal nerve. the multi-branched nerve guide conduit has multi-layer structure which is pore/non-pore/pore layer. PCL/PEO filament was fabricated using PCL (polycaprolactone) and PEO (polyethylene oxide) for pore layer in multi-layer, PCL filament was fabricated using PCL for non-pore layer. the surface and cross section of fabricated nerve guide conduit with pore/non-pore/pore layer structure was observed through SEM (scanning electron microscope), sub-micro size pore like fibrous structure was shown the surface and cross section on the PCL/PEO filament(~3㎛). and then for the cell behavior assessment, fabricated multi-branched nerve guide conduit was evaluated using rat's derived glial cell. as a result of CCK-8 assay, live and dead and cell differentiation assessment, the pore/non-pore/pore layer structure of nerve conduit with multi-branch showed better cell behavior than the non-pore layer structure, and neuronal differentiation was also active.
in this study, we proposed the multi-branched nerve guide conduit fabrication method for nerve regeneration such as peroneal nerve. the multi-branched nerve guide conduit has multi-layer structure which is pore/non-pore/pore layer. PCL/PEO filament was fabricated using PCL (polycaprolactone) and PEO (polyethylene oxide) for pore layer in multi-layer, PCL filament was fabricated using PCL for non-pore layer. the surface and cross section of fabricated nerve guide conduit with pore/non-pore/pore layer structure was observed through SEM (scanning electron microscope), sub-micro size pore like fibrous structure was shown the surface and cross section on the PCL/PEO filament(~3㎛). and then for the cell behavior assessment, fabricated multi-branched nerve guide conduit was evaluated using rat's derived glial cell. as a result of CCK-8 assay, live and dead and cell differentiation assessment, the pore/non-pore/pore layer structure of nerve conduit with multi-branch showed better cell behavior than the non-pore layer structure, and neuronal differentiation was also active.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.