Effects of UV treatment on the carbon contamination of orthodontics microimplant surface after autoclaving and aging : 자외선 처리가 교정용 마이크로 임플란트 표면에 미치는 효과원문보기
이 연구의 목적은, 마이크로임플란트의 보관기간과 증기고압멸균이 표면의 탄소함량에 미치는 영향과, 자외선 처리를 통해 탄소함량을 감소시킬 수 있는가를 조사하는 것이다. 보관기간의 영향을 조사하기 위해, 11년 동안 4개의 다른 시점에서 제작된 4개의 마이크로임플란트 그룹을 비교 실험하였고, 증기고압멸균과 자외선 처치의 효과를 평가하기 위해서는 2개 그룹 (새로 제작된 마이크로임플란트와 제조 후 11년 경과된 마이크로임플란트)을 사용하여 실험하였다. 물 접촉각 실험, 세포활성 검사를 사용하여 표면 탄소함량이 마이크로임플란트의 생물학적 특성에 미치는 영향도 함께 조사하였다. 실험결과, 11년의 보관기간 동안 마이크로임플란트 표면의 탄소함량은 점차 증가함을, 또한 증기고압멸균에 의해서 탄소함량이 증가됨을, 그리고 자외선 처리를 통해서 탄소함량을 유의하게 감소시킬 수 있음을 관찰하였다. 한편, 마이크로임플란트 표면의 탄소함량 감소에 따라 세포활성에는 주목할 변화가 없었으나 표면의 초친수성이 증가됨을 관찰하였다. 이 결과로부터, 마이크로임플란트의 긴 보관기간과 증기고압멸균처리는 표면의 탄소함량을 증가시키지만 자외선 처리는 마이크로임플란트 표면의 탄소함량을 감소시키고 초친수성을 증가시키므로 마이크로임플란트의 안정성 향상을 유도할 수 있을 것이라는 결론을 얻었다. 주제어: 교정용 마이크로임플란트, ...
이 연구의 목적은, 마이크로임플란트의 보관기간과 증기고압멸균이 표면의 탄소함량에 미치는 영향과, 자외선 처리를 통해 탄소함량을 감소시킬 수 있는가를 조사하는 것이다. 보관기간의 영향을 조사하기 위해, 11년 동안 4개의 다른 시점에서 제작된 4개의 마이크로임플란트 그룹을 비교 실험하였고, 증기고압멸균과 자외선 처치의 효과를 평가하기 위해서는 2개 그룹 (새로 제작된 마이크로임플란트와 제조 후 11년 경과된 마이크로임플란트)을 사용하여 실험하였다. 물 접촉각 실험, 세포활성 검사를 사용하여 표면 탄소함량이 마이크로임플란트의 생물학적 특성에 미치는 영향도 함께 조사하였다. 실험결과, 11년의 보관기간 동안 마이크로임플란트 표면의 탄소함량은 점차 증가함을, 또한 증기고압멸균에 의해서 탄소함량이 증가됨을, 그리고 자외선 처리를 통해서 탄소함량을 유의하게 감소시킬 수 있음을 관찰하였다. 한편, 마이크로임플란트 표면의 탄소함량 감소에 따라 세포활성에는 주목할 변화가 없었으나 표면의 초친수성이 증가됨을 관찰하였다. 이 결과로부터, 마이크로임플란트의 긴 보관기간과 증기고압멸균처리는 표면의 탄소함량을 증가시키지만 자외선 처리는 마이크로임플란트 표면의 탄소함량을 감소시키고 초친수성을 증가시키므로 마이크로임플란트의 안정성 향상을 유도할 수 있을 것이라는 결론을 얻었다. 주제어: 교정용 마이크로임플란트, 탄화수소, 자외선 처치
이 연구의 목적은, 마이크로임플란트의 보관기간과 증기고압멸균이 표면의 탄소함량에 미치는 영향과, 자외선 처리를 통해 탄소함량을 감소시킬 수 있는가를 조사하는 것이다. 보관기간의 영향을 조사하기 위해, 11년 동안 4개의 다른 시점에서 제작된 4개의 마이크로임플란트 그룹을 비교 실험하였고, 증기고압멸균과 자외선 처치의 효과를 평가하기 위해서는 2개 그룹 (새로 제작된 마이크로임플란트와 제조 후 11년 경과된 마이크로임플란트)을 사용하여 실험하였다. 물 접촉각 실험, 세포활성 검사를 사용하여 표면 탄소함량이 마이크로임플란트의 생물학적 특성에 미치는 영향도 함께 조사하였다. 실험결과, 11년의 보관기간 동안 마이크로임플란트 표면의 탄소함량은 점차 증가함을, 또한 증기고압멸균에 의해서 탄소함량이 증가됨을, 그리고 자외선 처리를 통해서 탄소함량을 유의하게 감소시킬 수 있음을 관찰하였다. 한편, 마이크로임플란트 표면의 탄소함량 감소에 따라 세포활성에는 주목할 변화가 없었으나 표면의 초친수성이 증가됨을 관찰하였다. 이 결과로부터, 마이크로임플란트의 긴 보관기간과 증기고압멸균처리는 표면의 탄소함량을 증가시키지만 자외선 처리는 마이크로임플란트 표면의 탄소함량을 감소시키고 초친수성을 증가시키므로 마이크로임플란트의 안정성 향상을 유도할 수 있을 것이라는 결론을 얻었다. 주제어: 교정용 마이크로임플란트, 탄화수소, 자외선 처치
The aim of this study was to investigate the effects of storage time and steam autoclaving on the accumulation of carbon content on the microimplant surfaces and the effectiveness of UV treatment in reducing the carbon contamination. The effects of storage time was tested using microimplants from fo...
The aim of this study was to investigate the effects of storage time and steam autoclaving on the accumulation of carbon content on the microimplant surfaces and the effectiveness of UV treatment in reducing the carbon contamination. The effects of storage time was tested using microimplants from four different years of manufacture across a span of eleven years. The effects of steam autoclaving and UV treatment on either increase or decrease of the carbon content were tested using two microimplant groups - the newly manufactured- and eleven year old microimplants. In addition to the surface carbon measurements, we further investigated the effect of surface carbon content on the biological properties of the microimplant, using a water contact angle test and cell activity test. Storage time showed a constant increase in the carbon contamination on the microimplants sufaces across eleven years. Among the newly manufactured microimplants there was a significant increase in carbon due to autoclaving and UV treatment significantly decontaminated the surface. Among the eleven years old microimplants, autoclaving did not effect the carbon content but UV treatment had a positive effect of the overall carbon content. UV treatment increased the superhydrophilicity, but there was no significant changes in the cell activity Increase in carbon contamination was due to storage time and steam autoclaving. However, UV treatment reduced the carbon contamination and increased superhydrophilicity of the microimplant surfaces. Key Words: Orthodontic MicroImplants, Hydrocarbon, UV treatment.
The aim of this study was to investigate the effects of storage time and steam autoclaving on the accumulation of carbon content on the microimplant surfaces and the effectiveness of UV treatment in reducing the carbon contamination. The effects of storage time was tested using microimplants from four different years of manufacture across a span of eleven years. The effects of steam autoclaving and UV treatment on either increase or decrease of the carbon content were tested using two microimplant groups - the newly manufactured- and eleven year old microimplants. In addition to the surface carbon measurements, we further investigated the effect of surface carbon content on the biological properties of the microimplant, using a water contact angle test and cell activity test. Storage time showed a constant increase in the carbon contamination on the microimplants sufaces across eleven years. Among the newly manufactured microimplants there was a significant increase in carbon due to autoclaving and UV treatment significantly decontaminated the surface. Among the eleven years old microimplants, autoclaving did not effect the carbon content but UV treatment had a positive effect of the overall carbon content. UV treatment increased the superhydrophilicity, but there was no significant changes in the cell activity Increase in carbon contamination was due to storage time and steam autoclaving. However, UV treatment reduced the carbon contamination and increased superhydrophilicity of the microimplant surfaces. Key Words: Orthodontic MicroImplants, Hydrocarbon, UV treatment.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.