고층 주거복합시설 스프링클러 가지배관 유속과 구경의 적정성에 대한 연구 A Study on the Optimization of the Water Flow Velocity and Bore Diameter of the Sprinkler Branch Lines for High-rise Residential Complex Building원문보기
고층 주거복합시설에서 스프링클러 수리계산시 국가화재안전기준 NFSC 103에서 제시하는 스프링클러 가지배관 내 6 m/s인 유속을 만족하기가 어렵다. 이는 고층건축물의 대부분이 2개 이상의 용도로 구성된 복합건축물이고 그에 따라 스프링클러 설계 조건도 기준개수 30개를 일괄 적용하고 있기 때문이다. 이 기준으로 설계 시 배관 내에서의 유량이 증가하는 반면 가지배관의 관경을 크게 하기 란 쉽지 않기 때문이다. 가지배관 내 유속을 만족하기 위해서는 가지배관 인입부가 최소 65 mm 이상이 되어야 한다. 그러나 현재 건축물에 설치되는 스프링클러 설비 배관은 65 mm 이상 시 내진설비를 설치해야만 되기 때문에 이를 만족하기 위해서는 거실 내부에 설치되는 65 mm 가지배관에 내진설비인 흔들림 방지 버팀대를 설치해야 한다[6]. 스프링클러 배관에 내진설비를 적용할 경우 현재 건축물의 거실 내부 ...
요 약
제 목 : 고층 주거복합시설 스프링클러 가지배관 유속과 구경의 적정성에 대한 연구
고층 주거복합시설에서 스프링클러 수리계산시 국가화재안전기준 NFSC 103에서 제시하는 스프링클러 가지배관 내 6 m/s인 유속을 만족하기가 어렵다. 이는 고층건축물의 대부분이 2개 이상의 용도로 구성된 복합건축물이고 그에 따라 스프링클러 설계 조건도 기준개수 30개를 일괄 적용하고 있기 때문이다. 이 기준으로 설계 시 배관 내에서의 유량이 증가하는 반면 가지배관의 관경을 크게 하기 란 쉽지 않기 때문이다. 가지배관 내 유속을 만족하기 위해서는 가지배관 인입부가 최소 65 mm 이상이 되어야 한다. 그러나 현재 건축물에 설치되는 스프링클러 설비 배관은 65 mm 이상 시 내진설비를 설치해야만 되기 때문에 이를 만족하기 위해서는 거실 내부에 설치되는 65 mm 가지배관에 내진설비인 흔들림 방지 버팀대를 설치해야 한다[6]. 스프링클러 배관에 내진설비를 적용할 경우 현재 건축물의 거실 내부 천정 높이가 현재보다 높아져야만 되고 이로 인해서 건축물의 비용 상승으로 이어지기 때문이다. 따라서 이를 넘지 않도록 설계 시 거실 내부 가지배관을 50 mm 이하로 설계하고 있다. 가지배관을 50 mm 이하로 설계 시 고층건축물에서는 배관 내의 압력의 상승으로 설계 기준인 유속 6 m/s 이하로 유지하기가 어렵다. 따라서 대부분 감압밸브를 다량 설치하여 유속을 낮추고 있다. 이는 부속품의 증가로 인한 경제적인 손실과 유지관리의 어려움을 초래하여 화재 시 소화 실패에 의한 인명 및 재산피해로 이어질 수 있다. 이에 본 논문은 가지배관을 50 mm와 65 mm로 구분하여 수리계산을 수행하고 가지배관에서의 압력, 유속, 유량을 검토한 후 가지배관 설계 시 65 mm를 적용해야 되는 타당성을 제시하고자 한다.
중심어 : 수리계산, 스프링클러 가지배관 유속, 고층 건축물, 가지배관 내진 설계
요 약
제 목 : 고층 주거복합시설 스프링클러 가지배관 유속과 구경의 적정성에 대한 연구
고층 주거복합시설에서 스프링클러 수리계산시 국가화재안전기준 NFSC 103에서 제시하는 스프링클러 가지배관 내 6 m/s인 유속을 만족하기가 어렵다. 이는 고층건축물의 대부분이 2개 이상의 용도로 구성된 복합건축물이고 그에 따라 스프링클러 설계 조건도 기준개수 30개를 일괄 적용하고 있기 때문이다. 이 기준으로 설계 시 배관 내에서의 유량이 증가하는 반면 가지배관의 관경을 크게 하기 란 쉽지 않기 때문이다. 가지배관 내 유속을 만족하기 위해서는 가지배관 인입부가 최소 65 mm 이상이 되어야 한다. 그러나 현재 건축물에 설치되는 스프링클러 설비 배관은 65 mm 이상 시 내진설비를 설치해야만 되기 때문에 이를 만족하기 위해서는 거실 내부에 설치되는 65 mm 가지배관에 내진설비인 흔들림 방지 버팀대를 설치해야 한다[6]. 스프링클러 배관에 내진설비를 적용할 경우 현재 건축물의 거실 내부 천정 높이가 현재보다 높아져야만 되고 이로 인해서 건축물의 비용 상승으로 이어지기 때문이다. 따라서 이를 넘지 않도록 설계 시 거실 내부 가지배관을 50 mm 이하로 설계하고 있다. 가지배관을 50 mm 이하로 설계 시 고층건축물에서는 배관 내의 압력의 상승으로 설계 기준인 유속 6 m/s 이하로 유지하기가 어렵다. 따라서 대부분 감압밸브를 다량 설치하여 유속을 낮추고 있다. 이는 부속품의 증가로 인한 경제적인 손실과 유지관리의 어려움을 초래하여 화재 시 소화 실패에 의한 인명 및 재산피해로 이어질 수 있다. 이에 본 논문은 가지배관을 50 mm와 65 mm로 구분하여 수리계산을 수행하고 가지배관에서의 압력, 유속, 유량을 검토한 후 가지배관 설계 시 65 mm를 적용해야 되는 타당성을 제시하고자 한다.
A Study on the Optimization of the Water Flow Velocity and Bore Diameter of the Sprinkler Branch Lines for High-rise Residential Complex Building
Lee, Tae Ju (Supervisor Lee, Su Kyung) Dept. of Disaster Safety and Fire Protection Program The Graduate School of ...
Abstract
A Study on the Optimization of the Water Flow Velocity and Bore Diameter of the Sprinkler Branch Lines for High-rise Residential Complex Building
Lee, Tae Ju (Supervisor Lee, Su Kyung) Dept. of Disaster Safety and Fire Protection Program The Graduate School of Industry Seoul National University of Science and Technology
When we design sprinkler system by using hydraulic calculation program, it is difficulty to meet the water flow velocity 6 m/s of the sprinkler branch lines of domestic standard, NFSC 103 on sprinkler system. The almost high-rise building in domestic is a residential complex building consisted of different using compartment. So, sprinkler system is applied to sprinkler head 30ea in water flow quantity in accordance with domestic standard. If we apply this standard, the water flow quantity in bore is increased but it is not easy to increase the bore of branch lines. The bore of the first line of branch lines have to have minimum 65 mm to meet the flow velocity 6 m/s. The 65 mm branch lines must be applied to earthquake endurance system in domestic law in case of appling earthquake endurance system in sprinkler branch lines the hight of residential building must be increased more than now. But now to apply this is very difficulty due to construction price increasing. So, design company applies 50 mm bore in all sprinkler branch lines in high rise residential complex building. In case of appling 50 mm bore in branch lines in high rise building the water flow velocity is over 6 m/s due to pressure increasing in branch lines. So, pressure reducing valve must be installed in main feeding line to reduce the water flow velocity in branch lines. As a result this makes high price increase and fire suppression failure by the difficulty of maintenance. In this paper I want to suggest the feasibility of 65 mm bore application in sprinkler branch lines after reviewing the pressure, flow velocity, and flow quantity in the sprinkler branch lines of 50 mm and 65 mm each.
Key word : Hydraulic calculation, Sprinkler branch lines Water flow velocity, High rise build, Branch lines earthquake endurance design.
Abstract
A Study on the Optimization of the Water Flow Velocity and Bore Diameter of the Sprinkler Branch Lines for High-rise Residential Complex Building
Lee, Tae Ju (Supervisor Lee, Su Kyung) Dept. of Disaster Safety and Fire Protection Program The Graduate School of Industry Seoul National University of Science and Technology
When we design sprinkler system by using hydraulic calculation program, it is difficulty to meet the water flow velocity 6 m/s of the sprinkler branch lines of domestic standard, NFSC 103 on sprinkler system. The almost high-rise building in domestic is a residential complex building consisted of different using compartment. So, sprinkler system is applied to sprinkler head 30ea in water flow quantity in accordance with domestic standard. If we apply this standard, the water flow quantity in bore is increased but it is not easy to increase the bore of branch lines. The bore of the first line of branch lines have to have minimum 65 mm to meet the flow velocity 6 m/s. The 65 mm branch lines must be applied to earthquake endurance system in domestic law in case of appling earthquake endurance system in sprinkler branch lines the hight of residential building must be increased more than now. But now to apply this is very difficulty due to construction price increasing. So, design company applies 50 mm bore in all sprinkler branch lines in high rise residential complex building. In case of appling 50 mm bore in branch lines in high rise building the water flow velocity is over 6 m/s due to pressure increasing in branch lines. So, pressure reducing valve must be installed in main feeding line to reduce the water flow velocity in branch lines. As a result this makes high price increase and fire suppression failure by the difficulty of maintenance. In this paper I want to suggest the feasibility of 65 mm bore application in sprinkler branch lines after reviewing the pressure, flow velocity, and flow quantity in the sprinkler branch lines of 50 mm and 65 mm each.
Key word : Hydraulic calculation, Sprinkler branch lines Water flow velocity, High rise build, Branch lines earthquake endurance design.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.