고유가 시대에 연료비가 상승하여 열효율이 가장 높은 화목연료는 도심지 외곽이나 농촌에서 많이 사용하고 있다. 화목연료는 참나무, 소나무, 폐목재, 종이 부스러기 등 많은 종류가 있으며 화목연료 난방설비기기로는 화목난로, 화목보일러가 있다. 특히, 화목난로는 화목보일러에 비해 구조가 간단하고 설치 및 이동성이 우수하여 캠핑장, 비닐하우스 등에 많이 사용되고 있다. 소방청 국가화재 정보센터(NFDS, National Fire Data System)의 5년간(2013~2017년) 화목난로 화재건수가 연간 평균 157건이 발생하고 있다. 화목난로 사용자가 증가하는데 비해 안전성에 관련된 법적 규제가 미흡하여 제조 및 설치 시 안전검사 절차가 없는 실정이다. 또한, 화목난로 화재 발생 시 낙엽, 풀 등 인접한 곳에 가연물이 많아 대형화재로 발생할 가능성이 매우 높게 확인되었다. 화목난로 화재사고 유형을 확인한 결과 발생하는 원인으로는 화목난로 과열로 인한 화재, 연통에서 발생하는 열로 인한 화재로 분석하였다. 화목연료는 산림청 ...
고유가 시대에 연료비가 상승하여 열효율이 가장 높은 화목연료는 도심지 외곽이나 농촌에서 많이 사용하고 있다. 화목연료는 참나무, 소나무, 폐목재, 종이 부스러기 등 많은 종류가 있으며 화목연료 난방설비기기로는 화목난로, 화목보일러가 있다. 특히, 화목난로는 화목보일러에 비해 구조가 간단하고 설치 및 이동성이 우수하여 캠핑장, 비닐하우스 등에 많이 사용되고 있다. 소방청 국가화재 정보센터(NFDS, National Fire Data System)의 5년간(2013~2017년) 화목난로 화재건수가 연간 평균 157건이 발생하고 있다. 화목난로 사용자가 증가하는데 비해 안전성에 관련된 법적 규제가 미흡하여 제조 및 설치 시 안전검사 절차가 없는 실정이다. 또한, 화목난로 화재 발생 시 낙엽, 풀 등 인접한 곳에 가연물이 많아 대형화재로 발생할 가능성이 매우 높게 확인되었다. 화목난로 화재사고 유형을 확인한 결과 발생하는 원인으로는 화목난로 과열로 인한 화재, 연통에서 발생하는 열로 인한 화재로 분석하였다. 화목연료는 산림청 자료 분석 결과 목재 사용량이 높은 참나무, 소나무로 선정하였다. 화목난로는 약 79.33정도 난방이 가능한 난로와 연통 사용률이 가장 높은 함석 스파이럴 연통을 사용하였다. 연통의 내·외부 온도는 열전대(K-type)과 Data logger, 열화상 카메라로 측정하였다. 본 실험에 앞서 모의실험1(열전대 보정 3회, 점화원 선정 10회, 연소재료 지지대 선정 10회), 모의실험2(각 연료별 점화 5회)을 하였다. 본 실험은 각 화목연료별 3kg로 1시간 기준으로 3회씩 실시하여 온도데이터 분석을 실시하였다. 연구결과 연통의 내부온도분포가 수직 연통부는 참나무 시작점 최고온도가 743.3℃, 소나무 시작점 최고온도 641.1℃로 확인되었고 최성기 단계의 온도유지시간이 참나무 약 11분, 소나무 약 19분으로 나타났다. 참나무 평균온도가 500℃이상, 소나무 평균온도가 400℃이상으로 확인되었다. 곡관 연통부는 위치별 온도가 역전되는 현상이 발생하여 곡관부 중앙지점의 온도가 가장 높게 나타났다. 수평부 연통에서 연통 상부와 스파이럴 나선형 부분에 열 축적이 많이 된다는 것을 확인할 수 있었다. 연통 접촉면과 이격거리 24.35cm의 복사열 온도차는 참나무 약 150℃, 소나무 약 130℃차이가 났다. 하지만 이격거리 24.35cm, 이격거리 48.7cm의 복사열 온도차이는 최고 5℃정도 밖에 차이가 나지 않았다. 본 실험결과를 통해 화목난로의 연통 사용 시 곡관부의 열 축적으로 인한 연통화재를 예방하기 위해 곡관부 설치를 지양해야 한다. 또한, 스파이럴 함석연통의 나선형 열 축적, 수평 연통부 상부 열 축적 등의 화재를 예방하기 위해 연통제작 시 안전검사의 기초자료로 활용하여 연통 화재 사고예방에 기여할 것으로 기대된다. In an era of high oil prices, outskirts of city or rural areais used the wood fuel of high thermal efficiency a lot. There are many kinds of woods fuels such as oak tree, pine tree, wood that can’t be used and paper debris, wood fuel heating system have wood stove and wood boiler. Especially due to the wood stove is simpler in construction also excellent for installation and mobility than the wood boiler so is often used in campground and plastic house. The National Fire Data System of the National Emergency Management Agency(NFDS) is taking place an average of 157 fires of wood stove fire annual over for five years(2013~2017). Due to Safety-related legal regulations is insufficient compared to increase of wood stove user so no situation safety inspection procedure during manufacturing and installation. Also in case fire of wood stove due to nearby place is many combustibles like fallen leaves, grass so it is highly possible to take place big fire. The cause of the wood stove fire is analyzed as a fire caused by stove overheating and by stove pipe overheating. In according to Forest Service data, wood fuel selected the most high wood usaged oak tree and pine tree. Wood stove select heated about 79.33degrees and the most frequently used galvanized steel plate stovepipe. The internal and external temperatures of the stovepipe is measured K-type, data logger and thermal imaging camera. Before this experiment, After the experiment simulate 1(thermocouple calibrations three times, selection of ignition source 10 times, materialsupport 10times), simulate 2(ignition for each fuel five times), the experiment analyzed temperature data for one hour and three times with 3kg of each fire fuel(oak tree, pine tree). Research result has shown that the highest temperature at the beginning of the oak tree 743.3℃ and pine tree 641.1℃. Temperature dwelling time of fully developed fire is confirmed to be about 11minutes oak tree and about 19 minutes pine tree. The average temperature of the oak tree is over 500℃ and the average temperature of the pine tree is over 400℃. The temperature of the connecting part of the curved stovepipe was reversed so the temperature at the center of the curved was the highest. The horizontal stovepipe has alot heat accumulation at the top of the stovepipe and at the top of the spiral. The temperature difference between the contact surface of stovepipe and the radiant heat with a distance of 24.35cm is about 150℃ and 130℃ between the oak tree and the pine tree. but the difference in temperature between the radiant heat with a separation distance of 24.35cm and a separation distance of 48.7cm was only about 5℃. From the results of this experiment suggest that the installation of the curved stovepipe should be avoided in order to prevent a lot heat accumulation from the curved stovepipe. Also it is expected to contribute to prevention of stovepipe fire by utilizing the base data of the safety inspection in case of stovepipe production to prevent fire that heat accumulation of the upper section of the stovepipe, heat accumulation spiral type of galvanized steel plate stovepipe.
고유가 시대에 연료비가 상승하여 열효율이 가장 높은 화목연료는 도심지 외곽이나 농촌에서 많이 사용하고 있다. 화목연료는 참나무, 소나무, 폐목재, 종이 부스러기 등 많은 종류가 있으며 화목연료 난방설비기기로는 화목난로, 화목보일러가 있다. 특히, 화목난로는 화목보일러에 비해 구조가 간단하고 설치 및 이동성이 우수하여 캠핑장, 비닐하우스 등에 많이 사용되고 있다. 소방청 국가화재 정보센터(NFDS, National Fire Data System)의 5년간(2013~2017년) 화목난로 화재건수가 연간 평균 157건이 발생하고 있다. 화목난로 사용자가 증가하는데 비해 안전성에 관련된 법적 규제가 미흡하여 제조 및 설치 시 안전검사 절차가 없는 실정이다. 또한, 화목난로 화재 발생 시 낙엽, 풀 등 인접한 곳에 가연물이 많아 대형화재로 발생할 가능성이 매우 높게 확인되었다. 화목난로 화재사고 유형을 확인한 결과 발생하는 원인으로는 화목난로 과열로 인한 화재, 연통에서 발생하는 열로 인한 화재로 분석하였다. 화목연료는 산림청 자료 분석 결과 목재 사용량이 높은 참나무, 소나무로 선정하였다. 화목난로는 약 79.33정도 난방이 가능한 난로와 연통 사용률이 가장 높은 함석 스파이럴 연통을 사용하였다. 연통의 내·외부 온도는 열전대(K-type)과 Data logger, 열화상 카메라로 측정하였다. 본 실험에 앞서 모의실험1(열전대 보정 3회, 점화원 선정 10회, 연소재료 지지대 선정 10회), 모의실험2(각 연료별 점화 5회)을 하였다. 본 실험은 각 화목연료별 3kg로 1시간 기준으로 3회씩 실시하여 온도데이터 분석을 실시하였다. 연구결과 연통의 내부온도분포가 수직 연통부는 참나무 시작점 최고온도가 743.3℃, 소나무 시작점 최고온도 641.1℃로 확인되었고 최성기 단계의 온도유지시간이 참나무 약 11분, 소나무 약 19분으로 나타났다. 참나무 평균온도가 500℃이상, 소나무 평균온도가 400℃이상으로 확인되었다. 곡관 연통부는 위치별 온도가 역전되는 현상이 발생하여 곡관부 중앙지점의 온도가 가장 높게 나타났다. 수평부 연통에서 연통 상부와 스파이럴 나선형 부분에 열 축적이 많이 된다는 것을 확인할 수 있었다. 연통 접촉면과 이격거리 24.35cm의 복사열 온도차는 참나무 약 150℃, 소나무 약 130℃차이가 났다. 하지만 이격거리 24.35cm, 이격거리 48.7cm의 복사열 온도차이는 최고 5℃정도 밖에 차이가 나지 않았다. 본 실험결과를 통해 화목난로의 연통 사용 시 곡관부의 열 축적으로 인한 연통화재를 예방하기 위해 곡관부 설치를 지양해야 한다. 또한, 스파이럴 함석연통의 나선형 열 축적, 수평 연통부 상부 열 축적 등의 화재를 예방하기 위해 연통제작 시 안전검사의 기초자료로 활용하여 연통 화재 사고예방에 기여할 것으로 기대된다. In an era of high oil prices, outskirts of city or rural area is used the wood fuel of high thermal efficiency a lot. There are many kinds of woods fuels such as oak tree, pine tree, wood that can’t be used and paper debris, wood fuel heating system have wood stove and wood boiler. Especially due to the wood stove is simpler in construction also excellent for installation and mobility than the wood boiler so is often used in campground and plastic house. The National Fire Data System of the National Emergency Management Agency(NFDS) is taking place an average of 157 fires of wood stove fire annual over for five years(2013~2017). Due to Safety-related legal regulations is insufficient compared to increase of wood stove user so no situation safety inspection procedure during manufacturing and installation. Also in case fire of wood stove due to nearby place is many combustibles like fallen leaves, grass so it is highly possible to take place big fire. The cause of the wood stove fire is analyzed as a fire caused by stove overheating and by stove pipe overheating. In according to Forest Service data, wood fuel selected the most high wood usaged oak tree and pine tree. Wood stove select heated about 79.33degrees and the most frequently used galvanized steel plate stovepipe. The internal and external temperatures of the stovepipe is measured K-type, data logger and thermal imaging camera. Before this experiment, After the experiment simulate 1(thermocouple calibrations three times, selection of ignition source 10 times, material support 10times), simulate 2(ignition for each fuel five times), the experiment analyzed temperature data for one hour and three times with 3kg of each fire fuel(oak tree, pine tree). Research result has shown that the highest temperature at the beginning of the oak tree 743.3℃ and pine tree 641.1℃. Temperature dwelling time of fully developed fire is confirmed to be about 11minutes oak tree and about 19 minutes pine tree. The average temperature of the oak tree is over 500℃ and the average temperature of the pine tree is over 400℃. The temperature of the connecting part of the curved stovepipe was reversed so the temperature at the center of the curved was the highest. The horizontal stovepipe has alot heat accumulation at the top of the stovepipe and at the top of the spiral. The temperature difference between the contact surface of stovepipe and the radiant heat with a distance of 24.35cm is about 150℃ and 130℃ between the oak tree and the pine tree. but the difference in temperature between the radiant heat with a separation distance of 24.35cm and a separation distance of 48.7cm was only about 5℃. From the results of this experiment suggest that the installation of the curved stovepipe should be avoided in order to prevent a lot heat accumulation from the curved stovepipe. Also it is expected to contribute to prevention of stovepipe fire by utilizing the base data of the safety inspection in case of stovepipe production to prevent fire that heat accumulation of the upper section of the stovepipe, heat accumulation spiral type of galvanized steel plate stovepipe.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.