오늘날 세계경제는 4차 산업혁명의 출발선에서 또 한번의 도약을 준비하고 있다. 급속한 산업정보화에 따른 전기설비의 정밀화·고도화·세분화는 이미 철지난 옛말이 되어가고 있다. 하루가 다르게 발전하고 있는 최첨단의 산업설비 및 그에 걸맞게 수준 높아진 전기사용자들은 더욱 더 안정적인 고품질의 전력공급 서비스를 요구하고 있다. 전력회사에서는 정전으로 인한 경제적 손실, 전기사용자들의 피해와 불편 등을 최소화하기 위하여 불가피한 경우를 제외하고 무정전 활선 작업을 시행하고 있다. 무정전 활선 작업은 고품질의 안정적 전력공급을 가능하게 하는 반면, 작업자가 충전부와 직접 접촉·근접하여 작업이 이루어지므로 충전부 직접 접촉에 의한 감전, 충전부 근접시 발생하는 아크화상 등 안전사고의 위험성이 크다. 이러한 위험성으로부터 작업자를 보호하기 위하여 절연용 보호구와 절연용 방호구 등의 안전장구를 사용하고 있다. 또한 22.9㎸ 배전설비의 약 80%가 지상에 설치된 가공설비로 건조물 신·증축, ...
오늘날 세계경제는 4차 산업혁명의 출발선에서 또 한번의 도약을 준비하고 있다. 급속한 산업정보화에 따른 전기설비의 정밀화·고도화·세분화는 이미 철지난 옛말이 되어가고 있다. 하루가 다르게 발전하고 있는 최첨단의 산업설비 및 그에 걸맞게 수준 높아진 전기사용자들은 더욱 더 안정적인 고품질의 전력공급 서비스를 요구하고 있다. 전력회사에서는 정전으로 인한 경제적 손실, 전기사용자들의 피해와 불편 등을 최소화하기 위하여 불가피한 경우를 제외하고 무정전 활선 작업을 시행하고 있다. 무정전 활선 작업은 고품질의 안정적 전력공급을 가능하게 하는 반면, 작업자가 충전부와 직접 접촉·근접하여 작업이 이루어지므로 충전부 직접 접촉에 의한 감전, 충전부 근접시 발생하는 아크화상 등 안전사고의 위험성이 크다. 이러한 위험성으로부터 작업자를 보호하기 위하여 절연용 보호구와 절연용 방호구 등의 안전장구를 사용하고 있다. 또한 22.9㎸ 배전설비의 약 80%가 지상에 설치된 가공설비로 건조물 신·증축, 리모델링 등 건축·건설공사 현장 인근에 위치하고 있어 일반인 및 공사 장비 등의 충전부 접촉·근접에 따른 안전사고 및 정전고장의 위험에 노출되어 있다. 22.9㎸ 배전설비 부근 건축·건설 공사 인력 및 장비의 접촉·근접으로 인한 안전사고 및 정전고장 예방을 위해 지장 전력설비 이설 또는 절연용 방호구를 활용하고 있다. 절연용 보호구란 작업자 자신의 안전을 확보하기 위하여 직접 신체에 착용하여 사용하는 안전장구를 말하며, 절연용 방호구란 작업자 및 일반인의 안전을 확보하기 위하여 설비 또는 장치에 설치하여 사용하는 안전장구를 말한다. 절연용 방호구는 무정전 활선 작업 등 단시간 전기공사현장에 사용되는 활선작업용 방호구와 건축·건설공사 또는 대규모 전기공사현장 등에 장기간 사용되는 건축용 방호구로 구분된다. 현행 22.9㎸ 배전설비에 사용되는 활선작업용 방호구는 충전부에 직접 접촉되지 않는 장소(절연피복된 전선)에 사용 가능한 절연내력 25㎸ 성능기준 제품으로 무정전 활선 작업 등 단기간 전기공사현장에 제한적으로 활용되고 있다. 건축·건설 공사현장 및 대규모 전기 공사현장 등 장기간 방호가 필요한 개소에 사용 가능한 건축용 방호구는 전력선(절연전선)을 방호하는 건축용방호관, 점퍼선방호관 2종류만 운영 중이며, 전력선 이외 기타설비를 방호할 수 있는 건축용 방호구가 없어 단기 작업시 활용되는 활선작업용 방호구를 임시로 설치하거나 전혀 설치하지 않는 경우가 대부분으로 22.9㎸ 전력설비 접촉·근접에 따른 안전사고 및 정전고장의 위험이 상존하고 있다. 본 연구를 통해 충전부를 직접 방호할 수 있고, 장기간 설치 가능한 선로호스 시험기준의 절연내력 45㎸급 건축용 방호구 5종(LP애자 덮개, LA 덮개, COS 덮개, 데드엔드 클램프 덮개, 완철 덮개)을 개발하여 22.9㎸ 배전설비 접촉·근접으로 인한 안전사고 및 정전고장을 획기적으로 감소시키고자 한다.
오늘날 세계경제는 4차 산업혁명의 출발선에서 또 한번의 도약을 준비하고 있다. 급속한 산업정보화에 따른 전기설비의 정밀화·고도화·세분화는 이미 철지난 옛말이 되어가고 있다. 하루가 다르게 발전하고 있는 최첨단의 산업설비 및 그에 걸맞게 수준 높아진 전기사용자들은 더욱 더 안정적인 고품질의 전력공급 서비스를 요구하고 있다. 전력회사에서는 정전으로 인한 경제적 손실, 전기사용자들의 피해와 불편 등을 최소화하기 위하여 불가피한 경우를 제외하고 무정전 활선 작업을 시행하고 있다. 무정전 활선 작업은 고품질의 안정적 전력공급을 가능하게 하는 반면, 작업자가 충전부와 직접 접촉·근접하여 작업이 이루어지므로 충전부 직접 접촉에 의한 감전, 충전부 근접시 발생하는 아크화상 등 안전사고의 위험성이 크다. 이러한 위험성으로부터 작업자를 보호하기 위하여 절연용 보호구와 절연용 방호구 등의 안전장구를 사용하고 있다. 또한 22.9㎸ 배전설비의 약 80%가 지상에 설치된 가공설비로 건조물 신·증축, 리모델링 등 건축·건설공사 현장 인근에 위치하고 있어 일반인 및 공사 장비 등의 충전부 접촉·근접에 따른 안전사고 및 정전고장의 위험에 노출되어 있다. 22.9㎸ 배전설비 부근 건축·건설 공사 인력 및 장비의 접촉·근접으로 인한 안전사고 및 정전고장 예방을 위해 지장 전력설비 이설 또는 절연용 방호구를 활용하고 있다. 절연용 보호구란 작업자 자신의 안전을 확보하기 위하여 직접 신체에 착용하여 사용하는 안전장구를 말하며, 절연용 방호구란 작업자 및 일반인의 안전을 확보하기 위하여 설비 또는 장치에 설치하여 사용하는 안전장구를 말한다. 절연용 방호구는 무정전 활선 작업 등 단시간 전기공사현장에 사용되는 활선작업용 방호구와 건축·건설공사 또는 대규모 전기공사현장 등에 장기간 사용되는 건축용 방호구로 구분된다. 현행 22.9㎸ 배전설비에 사용되는 활선작업용 방호구는 충전부에 직접 접촉되지 않는 장소(절연피복된 전선)에 사용 가능한 절연내력 25㎸ 성능기준 제품으로 무정전 활선 작업 등 단기간 전기공사현장에 제한적으로 활용되고 있다. 건축·건설 공사현장 및 대규모 전기 공사현장 등 장기간 방호가 필요한 개소에 사용 가능한 건축용 방호구는 전력선(절연전선)을 방호하는 건축용방호관, 점퍼선방호관 2종류만 운영 중이며, 전력선 이외 기타설비를 방호할 수 있는 건축용 방호구가 없어 단기 작업시 활용되는 활선작업용 방호구를 임시로 설치하거나 전혀 설치하지 않는 경우가 대부분으로 22.9㎸ 전력설비 접촉·근접에 따른 안전사고 및 정전고장의 위험이 상존하고 있다. 본 연구를 통해 충전부를 직접 방호할 수 있고, 장기간 설치 가능한 선로호스 시험기준의 절연내력 45㎸급 건축용 방호구 5종(LP애자 덮개, LA 덮개, COS 덮개, 데드엔드 클램프 덮개, 완철 덮개)을 개발하여 22.9㎸ 배전설비 접촉·근접으로 인한 안전사고 및 정전고장을 획기적으로 감소시키고자 한다.
Today, the world economy is preparing for another leap in the starting line of the Fourth Industrial Revolution. Precision, advancement, and segmentation of electric facilities due to the rapid industrial informatization have already become a thing of the past. The state-of-the-art industrial facili...
Today, the world economy is preparing for another leap in the starting line of the Fourth Industrial Revolution. Precision, advancement, and segmentation of electric facilities due to the rapid industrial informatization have already become a thing of the past. The state-of-the-art industrial facilities and their correspondingly high-level electrical users are demanding more stable and high-quality power supply services. To minimize the economic loss caused by power outages, damage and inconvenience of electric users, electric power companies are conducting uninterrupted live-wire operation except for unavoidable cases. While the uninterrupted live-wire operation enables high-quality and stable power supply, the worker is in direct contact with and close to the live part, so there is a great risk of safety accidents such as electric shock or arc-burn due to direct contact with the live part. In order to protect the workers from these risks, we use safety equipments such as insulation protection gears and insulated protecting stuffs. In addition, about 80% of the 22.9-kV distribution is made through overhead facilities, and it is located near construction sites such as new construction, expansion and remodeling of buildings. This may cause safety accidents of nearby person and power failure due to direct contact between construction equipments and live parts. To prevent these kinds of unwanted situation, we use guarding facilities or insulation guard. Insulation protection gear refers to safety equipment that is worn directly on the body of live-line workers to ensure the safety of the operator himself or herself. Insulated protecting stuffs refer to safety equipments installed on the electrical facilities to ensure the safety of line workers and the general public. Insulated protecting stuffs are categorized as live-line work use (usually short-term) and near construction sites use (longer term). The protecting stuffs used in the 22.9 kV power distribution facilities have an insulation strength of 25 kV that can be used for places as indirect contact with the live parts (like insulation coated wires), and they are used only for short-term electric work sites such as uninterrupted live-line work. The protecting stuffs for facilities near construction sites and large-scale electrical work sites which require long-term protection, can only protect power lines (insulated wires) of two types (straight line and jumpers). There is a risk of a safety accident and possible power failure due to contact and proximity of 22.9 kV live part, since there are no protecting stuffs for electric facilities other than power line ― protecting stuffs for short-term live-line work are used or even worse, none. This study will suggest five kinds of construction protection cover (LP insulator cover, LA cover, COS cover, dead-end clamp cover, and cross-arm cover) with insulation strength of 45 kV, which can protect the live parts directly and can be installed for a long time. These protection covers will reduce safety accidents and power outages caused by contact and proximity of 22.9-kV power distribution facilities.
Today, the world economy is preparing for another leap in the starting line of the Fourth Industrial Revolution. Precision, advancement, and segmentation of electric facilities due to the rapid industrial informatization have already become a thing of the past. The state-of-the-art industrial facilities and their correspondingly high-level electrical users are demanding more stable and high-quality power supply services. To minimize the economic loss caused by power outages, damage and inconvenience of electric users, electric power companies are conducting uninterrupted live-wire operation except for unavoidable cases. While the uninterrupted live-wire operation enables high-quality and stable power supply, the worker is in direct contact with and close to the live part, so there is a great risk of safety accidents such as electric shock or arc-burn due to direct contact with the live part. In order to protect the workers from these risks, we use safety equipments such as insulation protection gears and insulated protecting stuffs. In addition, about 80% of the 22.9-kV distribution is made through overhead facilities, and it is located near construction sites such as new construction, expansion and remodeling of buildings. This may cause safety accidents of nearby person and power failure due to direct contact between construction equipments and live parts. To prevent these kinds of unwanted situation, we use guarding facilities or insulation guard. Insulation protection gear refers to safety equipment that is worn directly on the body of live-line workers to ensure the safety of the operator himself or herself. Insulated protecting stuffs refer to safety equipments installed on the electrical facilities to ensure the safety of line workers and the general public. Insulated protecting stuffs are categorized as live-line work use (usually short-term) and near construction sites use (longer term). The protecting stuffs used in the 22.9 kV power distribution facilities have an insulation strength of 25 kV that can be used for places as indirect contact with the live parts (like insulation coated wires), and they are used only for short-term electric work sites such as uninterrupted live-line work. The protecting stuffs for facilities near construction sites and large-scale electrical work sites which require long-term protection, can only protect power lines (insulated wires) of two types (straight line and jumpers). There is a risk of a safety accident and possible power failure due to contact and proximity of 22.9 kV live part, since there are no protecting stuffs for electric facilities other than power line ― protecting stuffs for short-term live-line work are used or even worse, none. This study will suggest five kinds of construction protection cover (LP insulator cover, LA cover, COS cover, dead-end clamp cover, and cross-arm cover) with insulation strength of 45 kV, which can protect the live parts directly and can be installed for a long time. These protection covers will reduce safety accidents and power outages caused by contact and proximity of 22.9-kV power distribution facilities.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.