Tin oxide(SnO2)는 rutile 구조를 가지는 물질로 내열 및 내화학성, 높은 충진도, 낮은 전기 비저항과 높은 밴드갭을 갖는 투명전극재료로서 전도성이 우수하고 전기적인 성질이 우수하여 디스플레이용 ...
Tin oxide(SnO2)는 rutile 구조를 가지는 물질로 내열 및 내화학성, 높은 충진도, 낮은 전기 비저항과 높은 밴드갭을 갖는 투명전극재료로서 전도성이 우수하고 전기적인 성질이 우수하여 디스플레이용 투명전극, 태양전지, 투명 열 소자, 전기소자 등으로 사용되고 있다. SnO2의 제조 방법으로는 열 화학 기상 증착법, 스퍼터 방법, 분사법 등으로 제작되고 있는데, 본 연구에서는 Spray pyrolysisdeposition 방법으로 제조하였다. SPD 방법을 이용하면 박막을 대량으로 만들 수 있고 낮은 비용으로 제조될 수 있기 때문에 박막 성장에 많이 이용된다. 코발트와 망간을 도핑한 SnO2(CoTO, MnTO)는 도핑 된 물질에 의하여 자기특성을 가지게 되며 이로 인해 전자기적 성질을 기대할 수 있는데, 코발트와 망간을 선택한 이유는 Hume-Rothery rules의 원자반경과 원자가전자의 개수이다. 코발트와 망간 이외에도 철과 니켈도 자성체의 특성을 가지는데 니켈은 전기화학적으로 불안정하며 철은 용액에서 산화가 되어 또 다른 alloy를 만들 것으로 생각되어 적합한 용질로 코발트와 망간을 선택하였다. 도펀트의 함량이 다른 CoTO와 MnTO를 각각 SPD 방법으로 증착시켜 단면과 표면을 관찰하는 scanning electron microscopy, 전기적 특성을 관찰하는 hall measurement을 측정하였다. 본 연구의 목적은 전자파 차폐 및 적외선 투과형 소재를 만들기 위한 기술을 정립하기 위함이다. 그렇기 때문에 CoTO와 MnTO의 차폐 효능(shielding efficiency)을 확인하기 위해서는 흡수(SEA), 반사(SER), 다중반사(SEMR)의 세 가지 SE를 모두 고려해 주어야 한다. 이러한 전자기적 특성을 확인하기 위해 본 연구에서는 shielding effectiveness, vibrating sample magnetometer와 FT-IR투과도를 측정하였다.
Tin oxide(SnO2)는 rutile 구조를 가지는 물질로 내열 및 내화학성, 높은 충진도, 낮은 전기 비저항과 높은 밴드갭을 갖는 투명전극재료로서 전도성이 우수하고 전기적인 성질이 우수하여 디스플레이용 투명전극, 태양전지, 투명 열 소자, 전기소자 등으로 사용되고 있다. SnO2의 제조 방법으로는 열 화학 기상 증착법, 스퍼터 방법, 분사법 등으로 제작되고 있는데, 본 연구에서는 Spray pyrolysis deposition 방법으로 제조하였다. SPD 방법을 이용하면 박막을 대량으로 만들 수 있고 낮은 비용으로 제조될 수 있기 때문에 박막 성장에 많이 이용된다. 코발트와 망간을 도핑한 SnO2(CoTO, MnTO)는 도핑 된 물질에 의하여 자기특성을 가지게 되며 이로 인해 전자기적 성질을 기대할 수 있는데, 코발트와 망간을 선택한 이유는 Hume-Rothery rules의 원자반경과 원자가전자의 개수이다. 코발트와 망간 이외에도 철과 니켈도 자성체의 특성을 가지는데 니켈은 전기화학적으로 불안정하며 철은 용액에서 산화가 되어 또 다른 alloy를 만들 것으로 생각되어 적합한 용질로 코발트와 망간을 선택하였다. 도펀트의 함량이 다른 CoTO와 MnTO를 각각 SPD 방법으로 증착시켜 단면과 표면을 관찰하는 scanning electron microscopy, 전기적 특성을 관찰하는 hall measurement을 측정하였다. 본 연구의 목적은 전자파 차폐 및 적외선 투과형 소재를 만들기 위한 기술을 정립하기 위함이다. 그렇기 때문에 CoTO와 MnTO의 차폐 효능(shielding efficiency)을 확인하기 위해서는 흡수(SEA), 반사(SER), 다중반사(SEMR)의 세 가지 SE를 모두 고려해 주어야 한다. 이러한 전자기적 특성을 확인하기 위해 본 연구에서는 shielding effectiveness, vibrating sample magnetometer와 FT-IR 투과도를 측정하였다.
Tin oxide (SnO2) is a material that has a rutile structure and is used as a transparent electrode, solar cell, transparent heat element, and electric device for display because it is highly conductive and has good electrical properties. The manufacturing methods of SnO2 are made by chemical depositi...
Tin oxide (SnO2) is a material that has a rutile structure and is used as a transparent electrode, solar cell, transparent heat element, and electric device for display because it is highly conductive and has good electrical properties. The manufacturing methods of SnO2 are made by chemical deposition method(CVD), sputter method and spray method. In this study, it was manufactured by the Spray pyrolysis position(SPD) method. The SPD method is often used for thin film growth because it can be made in large quantities and manufactured at low cost. SnO2 that doped Cobalt and Manganese(CoTO, MnTO) has magnetic properties. This can lead to EM shielding efficiency. The reason for choosing cobalt and manganese is the atomic radius of the hume-rothery rules and the number of the valence electrons. Besides cobalt and manganese, iron and nickel also have magnetic properties. Nickel is electrochemical unstable and iron is thought to oxidize in solution and make another alloy. So we chose cobalt and manganese for a suitable doping material. Deposition of CoTO and MnTO with different doping concentrations using the SPD method, respectively. SEM(scanning electric microscopy) to observe cutting faces and surfaces, and hall measurement to observe electrical characteristics were measured. The purpose of this study is to establish a technology for creating electromagnetic shielding and infrared transmission-type materials. To check the shielding effectiveness(SE) of CoTO and MnTO, all three SEs of absorption(SEA), reflection (SER), and multi-reflection (SEMR) must be considered. To identify these electromagnetic properties, the shielding effectivity, vibrating sample meter (VSM) and FT-NIR transmission were measured in this study.
Tin oxide (SnO2) is a material that has a rutile structure and is used as a transparent electrode, solar cell, transparent heat element, and electric device for display because it is highly conductive and has good electrical properties. The manufacturing methods of SnO2 are made by chemical deposition method(CVD), sputter method and spray method. In this study, it was manufactured by the Spray pyrolysis position(SPD) method. The SPD method is often used for thin film growth because it can be made in large quantities and manufactured at low cost. SnO2 that doped Cobalt and Manganese(CoTO, MnTO) has magnetic properties. This can lead to EM shielding efficiency. The reason for choosing cobalt and manganese is the atomic radius of the hume-rothery rules and the number of the valence electrons. Besides cobalt and manganese, iron and nickel also have magnetic properties. Nickel is electrochemical unstable and iron is thought to oxidize in solution and make another alloy. So we chose cobalt and manganese for a suitable doping material. Deposition of CoTO and MnTO with different doping concentrations using the SPD method, respectively. SEM(scanning electric microscopy) to observe cutting faces and surfaces, and hall measurement to observe electrical characteristics were measured. The purpose of this study is to establish a technology for creating electromagnetic shielding and infrared transmission-type materials. To check the shielding effectiveness(SE) of CoTO and MnTO, all three SEs of absorption(SEA), reflection (SER), and multi-reflection (SEMR) must be considered. To identify these electromagnetic properties, the shielding effectivity, vibrating sample meter (VSM) and FT-NIR transmission were measured in this study.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.