용액 공정 기반 Exciplex host를 도입한 유기 발광 소자와 페로브스카이트 양자점 발광 소자의 특성 분석 Fabrication and Analysis of Solution-processed OLEDs Using Exciplex Host and LEDs Using Perovskite Quantum Dots원문보기
최근 디스플레이 시장에서 LCD(Liquid Crystal Display)의 수요가 감소하면서 차세대 디스플레이로 전환하는 추세를 보이고 있다. 그 중 대표적으로 OLED(Organic Light Emitting Diode)는 스마트폰, 타블렛 PC, 노트북 등 중소형 디스플레이 부분에서 이미 90%가 넘는 점유율을 보이고 있으며, 대형 디스플레이 역시 높은 점유율을 보이고 있다. 특히 용액 공정의 경우, 낮은 물질 소모와 직접적으로 패터닝이 가능한 점, 그리고 낮은 공정 가격이라는 장점을 가지고 있어 많은 주목을 받고 있다. QD-LED(Quantum Dot ...
최근 디스플레이 시장에서 LCD(Liquid Crystal Display)의 수요가 감소하면서 차세대 디스플레이로 전환하는 추세를 보이고 있다. 그 중 대표적으로 OLED(Organic Light Emitting Diode)는 스마트폰, 타블렛 PC, 노트북 등 중소형 디스플레이 부분에서 이미 90%가 넘는 점유율을 보이고 있으며, 대형 디스플레이 역시 높은 점유율을 보이고 있다. 특히 용액 공정의 경우, 낮은 물질 소모와 직접적으로 패터닝이 가능한 점, 그리고 낮은 공정 가격이라는 장점을 가지고 있어 많은 주목을 받고 있다. QD-LED(Quantum Dot Light Emitting Diode)는 무기물이며 용액 공정에 특화되어있기 때문에 LCD나 OLED에 비해 가격이 싸고 수명이 길다는 장점을 가지고 있다. 현재 개발된 QD-LCD의 경우, LCD 구조를 그대로 사용하면서 BLU내 형광물질을 양자점으로 대체하여 사용하고 있지만, 양자점 자체를 발광 물질로 사용함으로써 BLU를 사용하지 않고도 구현하는 기술을 연구하는 추세이다. OLED와 QD-LED 모두 색재현율 및 명암비가 뛰어나며 LCD와 달리 백라이트나 액정이 필요하지 않아 두께가 얇은 장점을 가지고 있다. 또한 flexible, foldable, stretchable 디스플레이를 구현하는 데 있어서 다양한 기판에 공정이 가능하다는 이점을 통해 LCD 대비 유리하다. 넓은 시야각, 낮은 소비전력과 빠른 반응 속도 역시 OLED와 QD-LED의 장점으로 볼 수 있다. 그러나 높은 전압에서의 효율 저하 및 수명 문제 등 한계점이 발생하면서 이를 극복할 연구의 필요성이 중요해졌다. 본 논문에서는 크게 두 가지의 주제로 실험을 진행하였다. 첫 번째로 신규 acceptor 물질인 N2-135NS를 기존 녹색 인광 유기 발광 소자의 발광층 host에 Exciplex host로 도입하여 소자의 roll-off 개선 및 구동 전압 감소, 효율 증가를 목표로 소자 평가를 진행하였다. 두 번째로 페로브스카이트 양자점 물질인 CsPbBr3에 formamidinium(FA)을 도핑하여 FAxCs1-xPbBr3 조성을 이용하여 양자점 발광 소자의 구조에 따른 특성 평가를 진행하였다.
최근 디스플레이 시장에서 LCD(Liquid Crystal Display)의 수요가 감소하면서 차세대 디스플레이로 전환하는 추세를 보이고 있다. 그 중 대표적으로 OLED(Organic Light Emitting Diode)는 스마트폰, 타블렛 PC, 노트북 등 중소형 디스플레이 부분에서 이미 90%가 넘는 점유율을 보이고 있으며, 대형 디스플레이 역시 높은 점유율을 보이고 있다. 특히 용액 공정의 경우, 낮은 물질 소모와 직접적으로 패터닝이 가능한 점, 그리고 낮은 공정 가격이라는 장점을 가지고 있어 많은 주목을 받고 있다. QD-LED(Quantum Dot Light Emitting Diode)는 무기물이며 용액 공정에 특화되어있기 때문에 LCD나 OLED에 비해 가격이 싸고 수명이 길다는 장점을 가지고 있다. 현재 개발된 QD-LCD의 경우, LCD 구조를 그대로 사용하면서 BLU내 형광물질을 양자점으로 대체하여 사용하고 있지만, 양자점 자체를 발광 물질로 사용함으로써 BLU를 사용하지 않고도 구현하는 기술을 연구하는 추세이다. OLED와 QD-LED 모두 색재현율 및 명암비가 뛰어나며 LCD와 달리 백라이트나 액정이 필요하지 않아 두께가 얇은 장점을 가지고 있다. 또한 flexible, foldable, stretchable 디스플레이를 구현하는 데 있어서 다양한 기판에 공정이 가능하다는 이점을 통해 LCD 대비 유리하다. 넓은 시야각, 낮은 소비전력과 빠른 반응 속도 역시 OLED와 QD-LED의 장점으로 볼 수 있다. 그러나 높은 전압에서의 효율 저하 및 수명 문제 등 한계점이 발생하면서 이를 극복할 연구의 필요성이 중요해졌다. 본 논문에서는 크게 두 가지의 주제로 실험을 진행하였다. 첫 번째로 신규 acceptor 물질인 N2-135NS를 기존 녹색 인광 유기 발광 소자의 발광층 host에 Exciplex host로 도입하여 소자의 roll-off 개선 및 구동 전압 감소, 효율 증가를 목표로 소자 평가를 진행하였다. 두 번째로 페로브스카이트 양자점 물질인 CsPbBr3에 formamidinium(FA)을 도핑하여 FAxCs1-xPbBr3 조성을 이용하여 양자점 발광 소자의 구조에 따른 특성 평가를 진행하였다.
Recently, as the demand for LCD (Liquid Crystal Display) is decreasing in the display market, it is showing a trend to switch to the next-generation display. Among them, the OLED (Organic Light Emitting Diode) already has more than 90% of the market share in small and medium-sized display such as sm...
Recently, as the demand for LCD (Liquid Crystal Display) is decreasing in the display market, it is showing a trend to switch to the next-generation display. Among them, the OLED (Organic Light Emitting Diode) already has more than 90% of the market share in small and medium-sized display such as smart phone, tablet PC and laptops, and large display also has a high share. QD-LED (Quantum Dot Light Emitting Diode) is also actively researched as the next-generation display. QD-LED is inorganic and specialized in solution process, so compared with LCD or OLED, it has advantages of a cheap and long lifetime. Both OLED and QD-LED have advantages of excellent color gamut and contrast ratio, also they are thin in thickness because they don’t need to backlight or liquid crystal. Moreover, compared to LCD, they are possible to use a variety of substrates in order to realize flexible, foldable, and stretchable display. Its wide viewing angle, low power consumption, and fast reaction rate also can be seen as an advantage of OLED and QD-LED. But it is necessary to overcome problems like efficiency degradation at high voltage and decrease lifetime. Also, solution-processing for OLED or QD-LEDs, is gaining much attention in display industry due to its merits such as low material consumption, direct patterning, and low production cost. However, solution-processing still has a problem of lower device performance compared with vacuum evaporation. To solve these problems, the development of new materials is necessary. In this paper, we experimented with two main themes. First, a new acceptor material, N2-135NS, has been analyzed of the optical properties and used as a host of green phosphorescent emission layer. Second, a material, CsPbBr3, has been synthesized in room temperature at open air, and then structure of device has been diversified.
Recently, as the demand for LCD (Liquid Crystal Display) is decreasing in the display market, it is showing a trend to switch to the next-generation display. Among them, the OLED (Organic Light Emitting Diode) already has more than 90% of the market share in small and medium-sized display such as smart phone, tablet PC and laptops, and large display also has a high share. QD-LED (Quantum Dot Light Emitting Diode) is also actively researched as the next-generation display. QD-LED is inorganic and specialized in solution process, so compared with LCD or OLED, it has advantages of a cheap and long lifetime. Both OLED and QD-LED have advantages of excellent color gamut and contrast ratio, also they are thin in thickness because they don’t need to backlight or liquid crystal. Moreover, compared to LCD, they are possible to use a variety of substrates in order to realize flexible, foldable, and stretchable display. Its wide viewing angle, low power consumption, and fast reaction rate also can be seen as an advantage of OLED and QD-LED. But it is necessary to overcome problems like efficiency degradation at high voltage and decrease lifetime. Also, solution-processing for OLED or QD-LEDs, is gaining much attention in display industry due to its merits such as low material consumption, direct patterning, and low production cost. However, solution-processing still has a problem of lower device performance compared with vacuum evaporation. To solve these problems, the development of new materials is necessary. In this paper, we experimented with two main themes. First, a new acceptor material, N2-135NS, has been analyzed of the optical properties and used as a host of green phosphorescent emission layer. Second, a material, CsPbBr3, has been synthesized in room temperature at open air, and then structure of device has been diversified.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.