두 개의 서로 다른 고분자가 공유결합으로 연결된 블록 공중합체(block copolymer, BCP)는 대표적인 자기조립(self-assembly) 물질로 나노패턴 제작 소재로 많은 관심을 받고 있다. BCP는 부피 분율에 따라 3~50 nm 크기를 가지는 구(sphere), 실린더(cylinder), ...
두 개의 서로 다른 고분자가 공유결합으로 연결된 블록 공중합체(block copolymer, BCP)는 대표적인 자기조립(self-assembly) 물질로 나노패턴 제작 소재로 많은 관심을 받고 있다. BCP는 부피 분율에 따라 3~50 nm 크기를 가지는 구(sphere), 실린더(cylinder), 라멜라(lamellae) 구조의 제작이 가능하며, 이를 활용하기 위하여 두 고분자 블록에 대한 중성층이 (PS-b-PMMA의 경우, 약 contact angle 75~85도)요구된다. 본 연구에서는 이러한 neutral layer없이, 토폴로지 confinement 효과를 이용하여, PS-b-PMMA 나노구조를 수직하게 배향 가능함을 보여준다. 또한 토폴로지 confinement의 조절을 통하여, PS-b-PMMA의 상(phase) 변화가 가능함을 소개하고자 한다.
두 개의 서로 다른 고분자가 공유결합으로 연결된 블록 공중합체(block copolymer, BCP)는 대표적인 자기조립(self-assembly) 물질로 나노패턴 제작 소재로 많은 관심을 받고 있다. BCP는 부피 분율에 따라 3~50 nm 크기를 가지는 구(sphere), 실린더(cylinder), 라멜라(lamellae) 구조의 제작이 가능하며, 이를 활용하기 위하여 두 고분자 블록에 대한 중성층이 (PS-b-PMMA의 경우, 약 contact angle 75~85도)요구된다. 본 연구에서는 이러한 neutral layer없이, 토폴로지 confinement 효과를 이용하여, PS-b-PMMA 나노구조를 수직하게 배향 가능함을 보여준다. 또한 토폴로지 confinement의 조절을 통하여, PS-b-PMMA의 상(phase) 변화가 가능함을 소개하고자 한다.
Block copolymers (BCPs) in which two different polymers are linked by a covalent bond are representative self-assembly materials and has received a lot of research attention as materials for nanopatterning. BCPs can generate nanodomains having a feature size of 3-50 nm depending on the volume fracti...
Block copolymers (BCPs) in which two different polymers are linked by a covalent bond are representative self-assembly materials and has received a lot of research attention as materials for nanopatterning. BCPs can generate nanodomains having a feature size of 3-50 nm depending on the volume fraction. For utilize this method, the neutral layer for the two polymer blocks (for PS-b-PMMA, about 75~85 degrees of contact angle) is required. This study shows that it is possible to vertically orient the PS-b-PMMA nanostructure without a neutral layer using the topological confinement effect. In addition, this research introduce that it is possible to change the phase of PS-b-PMMA through the control of the topological confinement.
Block copolymers (BCPs) in which two different polymers are linked by a covalent bond are representative self-assembly materials and has received a lot of research attention as materials for nanopatterning. BCPs can generate nanodomains having a feature size of 3-50 nm depending on the volume fraction. For utilize this method, the neutral layer for the two polymer blocks (for PS-b-PMMA, about 75~85 degrees of contact angle) is required. This study shows that it is possible to vertically orient the PS-b-PMMA nanostructure without a neutral layer using the topological confinement effect. In addition, this research introduce that it is possible to change the phase of PS-b-PMMA through the control of the topological confinement.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.