최근 국내에서는 미세먼지가 심각한 자연재해로 분류되고 있다. 실제로 서울의 미세먼지 농도는 세계 주요도시보다 1.2배∼3.5배 높은 수준이며, 미세먼지의 위험성은 국민 건강을 위협하는 주요인으로 대두되고 있는 실정이다. 이러한 미세먼지의 원인물질 중 질소산화물, 황산화물 등 가스 상 물질은 전체 미세먼지의 절반이상을 차지하고 있다. 특히 이중 NOx의 경우는 체내에 침투 시 호흡기 관련 질병을 유발시키고, 산성비의 주요 원인이며 오존층을 파괴하여 ...
최근 국내에서는 미세먼지가 심각한 자연재해로 분류되고 있다. 실제로 서울의 미세먼지 농도는 세계 주요도시보다 1.2배∼3.5배 높은 수준이며, 미세먼지의 위험성은 국민 건강을 위협하는 주요인으로 대두되고 있는 실정이다. 이러한 미세먼지의 원인물질 중 질소산화물, 황산화물 등 가스 상 물질은 전체 미세먼지의 절반이상을 차지하고 있다. 특히 이중 NOx의 경우는 체내에 침투 시 호흡기 관련 질병을 유발시키고, 산성비의 주요 원인이며 오존층을 파괴하여 기후변화를 유발시키는 등 치명적인 유해물질로 분류되며 이에 대한 저감 대책이 시급한 실정이다. 이러한 상황에서 최근 빛을 에너지원으로 촉매반응을 촉진시켜 NOx를 분해하는 TiO2(이산화탄) 광촉매기술이 대두되고 있다. 다만 이런 광촉매기술은 해외 선진국을 중심으로 실용화사례가 다수 있으나 국내에서는 처음 도입되는 기술로, 국내 적용을 위해서는 NOx농도 저감 성능에 대한 명확한 확인 및 검증이 요구되고 있다. 특히 TiO2광촉매의 NOx 분해 성능은 현재 실험실 조건에서는 참고할 만한 표준시험규격이 있으나, 현장에서 NOx 분해성능을 분석하고 측정하는 실험방법은 거의 부재한 실정이다. 이에 본 연구에서는 광촉매도료의 NOx 저감 분석을 위해, 기본 실험격인 실험실기반 NOx 분석실험과, 본 실험으로 현장실험을 병행하여 수행하였다. 특히 현장실험방법은 ISO실험법을 최대한 준용하여 제안함으로써 실험방법의 합리성을 도모하고자 하였다. 또한 이러한 정량적 분석방법 외에 실제 광촉매 도료 표면분석을 통하여 광촉매 활성 여부 및 정도를 분광학적인 기술로 직접 확인하는 정성적 실험을 별도로 수행함으로써 정량적 실험결과를 상호 보완할 수 있도록 계획하였다. 먼저 기본실험으로, 현장실험대상 광촉매도료를 대상으로 ISO 규격 시험법에 의한 광반응기 실험 및 세척수 실험을 수행하여 실험실에서의 NO제거량 분석 결과를 도출하였다. 실험결과 광반응기 실험에 의한 NO제거량과 동일시편에 대한 세척수 실험에서 NOx용출량이 거의 유사한 것을 확인하여 두 가지 실험법은 각각 충분한 신뢰성과 객관성이 있다는 것을 확인할 수 있었다. 본 실험으로 첫째 정량적 현장실험법인 자연광 Pilot반응기 실험방법을 제안하였고, 제안방법에 의한 현장실험을 수행하였다. 본 실험법은 실험실 환경에서의 ISO UV-A 반응기 실험을 준용한 현장실험법으로 대기 중 자연광을 광원으로 광촉매도료를 도포한 벽면에 반응기를 설치하여 NOx 저감 성능을 분석할 수 있는 현장 실헙법이며, 구체적인 실험방법도 제시하였다. 또한 본 현장실험을 통하여, 실험실에서 평균광량 10W/㎡, NO제거량 1.92μmol/50㎠인 광촉매페인트는, 현장에서 자연광 UV평균광량이 10.8~19.54W/㎡(실험실 평균광량의 1.08~1.95배)인 경우 NO제거량은 1.74~2.48배, 5.52~6.67W/㎡(실험실 평균광량의 0.55~0.67배)인 경우 NO제거량은 0.36~0.98배로 나타나, NO제거량과 자연광 광량이 전반적으로 비례한다는 경향을 확인할 수 있었고, 대상 광촉매페인트는 NOx농도 제거성능을 보유하고 있음을 정량적으로 확인할 수 있었다. 본 실험으로 두번째 정량적 현장실험법인 자연광 세척수 실험방법을 제안하였고, 본 방법에 의한 현장실험을 수행하였다. 본 실험법은 실험실 환경에서의 ISO UV-A 세척수실험을 준용한 현장실험법으로, 시편을 대기 중 자연광에 일정 기간 노출한 후 증류수로 세척하여 해당 세척수에서 질산이온 및 아질산이온을 정량적으로 분석하여 NO 제거량을 산정하는 현장 실험방법이다. 먼저 시편은 ISO UV-A 세척수 실험법에서 명시한 규격시편(5×10㎝)과 80×90㎝크기의 대형 CRC(Cellulose fiber Reinforced Cement)보드 시편 2종류로 제작하고, 세척방법 등 세부실험방법을 제안하였다. 본 실험방법을 통하여 자연광에 5일간 노출한 시편을 대상으로 세척수실험 수행결과, 1일 평균 NO제거량은 5×10cm ISO규격시편의 경우 2.83μmol/50㎠·day, 80×90㎝크기의 대형시편의 경우 2.04μmol/50㎠·day을 확인할 수 있었고, 일반 수성페인트의 경우 광촉매 활성이 거의 없음을 확인할 수 있었다. 이상과 같은 실험결과를 볼 때, 본 현장실험 방법으로 자연광상태에서의 광촉매 외장도료의 정량적 NO 제거량 분석이 가능할 것으로 사료되었다. 또 다른 본 실험으로 화학분야의 분석방법을 본 현장시험법에 차용한 표면분석방법을 제안하였고, 본 방법에 의한 현장실험을 수행하였다. 본 실험법은 광촉매도료 표면을 대상으로 대기노출 전·후 및 세척시의 표면구성 물질 상태변화를 분광학적 기술을 통해 광촉매반응 활성여부를 직접적으로 확인하는 정성적 실험법으로, 본 실험방법에 의한 실험결과, 자연광 10일 노출 광촉매도료 표면에서 질소산화물 19%, 황산화물 56%, 산화된 휘발성유기화합물 19% 등 미세먼지원인물질이 전체표면의 92%가량 분포한 것을 확인하였다. 또한, 자연광을 조사하지 않은 광촉매 도료에서는 질산, 황산 등은 검출되지 않았으며, 광산화반응이 일어난 후 세척시에는 질산, 황산이 물에 녹아 사라짐을 확인할 수 있었다.
이상과 같은 연구를 통하여 공동주택 외벽에 도장한 TiO2 광촉매 첨가 코팅제 및 페인트는 일반 수성페인트와 달리 유의미한 NOx 저감성능을 보유하고 있음을 명확히 확인할 수 있었다. 또한 기초실험으로 실험실 기반 ISO규격 실험법에 의한 2가지 정량적 실험을 수행하고, 본 실험으로 제안한 2가지 정량적 현장실험 및 1가지 정성적 실험을 수행한다면 광촉매도료의 NOx저감 성능을 객관적으로 규명할 수 있을 것으로 사료되었다. 특히 본 연구는 우수한 광촉매기술이 개발되어 실험실 조건에서 성능이 입증되어도, 실제 현장에서 그 성능이 구현 되는지에 대한 의문이 제기될 경우, 활용 가능한 현장실험 방법을 제안 하였다는 데 연구적 의의가 있을 것으로 사료된다. 또한 광촉매 외장도료를 공동주택에 활용하면 미세먼지 원인물질인 NOx를 저감함으로써, 궁극적으로 입주자의 건강을 확보하고 쾌적한 주거환경 창출에 기여할 것으로 판단된다.
최근 국내에서는 미세먼지가 심각한 자연재해로 분류되고 있다. 실제로 서울의 미세먼지 농도는 세계 주요도시보다 1.2배∼3.5배 높은 수준이며, 미세먼지의 위험성은 국민 건강을 위협하는 주요인으로 대두되고 있는 실정이다. 이러한 미세먼지의 원인물질 중 질소산화물, 황산화물 등 가스 상 물질은 전체 미세먼지의 절반이상을 차지하고 있다. 특히 이중 NOx의 경우는 체내에 침투 시 호흡기 관련 질병을 유발시키고, 산성비의 주요 원인이며 오존층을 파괴하여 기후변화를 유발시키는 등 치명적인 유해물질로 분류되며 이에 대한 저감 대책이 시급한 실정이다. 이러한 상황에서 최근 빛을 에너지원으로 촉매반응을 촉진시켜 NOx를 분해하는 TiO2(이산화탄) 광촉매기술이 대두되고 있다. 다만 이런 광촉매기술은 해외 선진국을 중심으로 실용화사례가 다수 있으나 국내에서는 처음 도입되는 기술로, 국내 적용을 위해서는 NOx농도 저감 성능에 대한 명확한 확인 및 검증이 요구되고 있다. 특히 TiO2광촉매의 NOx 분해 성능은 현재 실험실 조건에서는 참고할 만한 표준시험규격이 있으나, 현장에서 NOx 분해성능을 분석하고 측정하는 실험방법은 거의 부재한 실정이다. 이에 본 연구에서는 광촉매도료의 NOx 저감 분석을 위해, 기본 실험격인 실험실기반 NOx 분석실험과, 본 실험으로 현장실험을 병행하여 수행하였다. 특히 현장실험방법은 ISO실험법을 최대한 준용하여 제안함으로써 실험방법의 합리성을 도모하고자 하였다. 또한 이러한 정량적 분석방법 외에 실제 광촉매 도료 표면분석을 통하여 광촉매 활성 여부 및 정도를 분광학적인 기술로 직접 확인하는 정성적 실험을 별도로 수행함으로써 정량적 실험결과를 상호 보완할 수 있도록 계획하였다. 먼저 기본실험으로, 현장실험대상 광촉매도료를 대상으로 ISO 규격 시험법에 의한 광반응기 실험 및 세척수 실험을 수행하여 실험실에서의 NO제거량 분석 결과를 도출하였다. 실험결과 광반응기 실험에 의한 NO제거량과 동일시편에 대한 세척수 실험에서 NOx용출량이 거의 유사한 것을 확인하여 두 가지 실험법은 각각 충분한 신뢰성과 객관성이 있다는 것을 확인할 수 있었다. 본 실험으로 첫째 정량적 현장실험법인 자연광 Pilot반응기 실험방법을 제안하였고, 제안방법에 의한 현장실험을 수행하였다. 본 실험법은 실험실 환경에서의 ISO UV-A 반응기 실험을 준용한 현장실험법으로 대기 중 자연광을 광원으로 광촉매도료를 도포한 벽면에 반응기를 설치하여 NOx 저감 성능을 분석할 수 있는 현장 실헙법이며, 구체적인 실험방법도 제시하였다. 또한 본 현장실험을 통하여, 실험실에서 평균광량 10W/㎡, NO제거량 1.92μmol/50㎠인 광촉매페인트는, 현장에서 자연광 UV평균광량이 10.8~19.54W/㎡(실험실 평균광량의 1.08~1.95배)인 경우 NO제거량은 1.74~2.48배, 5.52~6.67W/㎡(실험실 평균광량의 0.55~0.67배)인 경우 NO제거량은 0.36~0.98배로 나타나, NO제거량과 자연광 광량이 전반적으로 비례한다는 경향을 확인할 수 있었고, 대상 광촉매페인트는 NOx농도 제거성능을 보유하고 있음을 정량적으로 확인할 수 있었다. 본 실험으로 두번째 정량적 현장실험법인 자연광 세척수 실험방법을 제안하였고, 본 방법에 의한 현장실험을 수행하였다. 본 실험법은 실험실 환경에서의 ISO UV-A 세척수실험을 준용한 현장실험법으로, 시편을 대기 중 자연광에 일정 기간 노출한 후 증류수로 세척하여 해당 세척수에서 질산이온 및 아질산이온을 정량적으로 분석하여 NO 제거량을 산정하는 현장 실험방법이다. 먼저 시편은 ISO UV-A 세척수 실험법에서 명시한 규격시편(5×10㎝)과 80×90㎝크기의 대형 CRC(Cellulose fiber Reinforced Cement)보드 시편 2종류로 제작하고, 세척방법 등 세부실험방법을 제안하였다. 본 실험방법을 통하여 자연광에 5일간 노출한 시편을 대상으로 세척수실험 수행결과, 1일 평균 NO제거량은 5×10cm ISO규격시편의 경우 2.83μmol/50㎠·day, 80×90㎝크기의 대형시편의 경우 2.04μmol/50㎠·day을 확인할 수 있었고, 일반 수성페인트의 경우 광촉매 활성이 거의 없음을 확인할 수 있었다. 이상과 같은 실험결과를 볼 때, 본 현장실험 방법으로 자연광상태에서의 광촉매 외장도료의 정량적 NO 제거량 분석이 가능할 것으로 사료되었다. 또 다른 본 실험으로 화학분야의 분석방법을 본 현장시험법에 차용한 표면분석방법을 제안하였고, 본 방법에 의한 현장실험을 수행하였다. 본 실험법은 광촉매도료 표면을 대상으로 대기노출 전·후 및 세척시의 표면구성 물질 상태변화를 분광학적 기술을 통해 광촉매반응 활성여부를 직접적으로 확인하는 정성적 실험법으로, 본 실험방법에 의한 실험결과, 자연광 10일 노출 광촉매도료 표면에서 질소산화물 19%, 황산화물 56%, 산화된 휘발성유기화합물 19% 등 미세먼지원인물질이 전체표면의 92%가량 분포한 것을 확인하였다. 또한, 자연광을 조사하지 않은 광촉매 도료에서는 질산, 황산 등은 검출되지 않았으며, 광산화반응이 일어난 후 세척시에는 질산, 황산이 물에 녹아 사라짐을 확인할 수 있었다.
이상과 같은 연구를 통하여 공동주택 외벽에 도장한 TiO2 광촉매 첨가 코팅제 및 페인트는 일반 수성페인트와 달리 유의미한 NOx 저감성능을 보유하고 있음을 명확히 확인할 수 있었다. 또한 기초실험으로 실험실 기반 ISO규격 실험법에 의한 2가지 정량적 실험을 수행하고, 본 실험으로 제안한 2가지 정량적 현장실험 및 1가지 정성적 실험을 수행한다면 광촉매도료의 NOx저감 성능을 객관적으로 규명할 수 있을 것으로 사료되었다. 특히 본 연구는 우수한 광촉매기술이 개발되어 실험실 조건에서 성능이 입증되어도, 실제 현장에서 그 성능이 구현 되는지에 대한 의문이 제기될 경우, 활용 가능한 현장실험 방법을 제안 하였다는 데 연구적 의의가 있을 것으로 사료된다. 또한 광촉매 외장도료를 공동주택에 활용하면 미세먼지 원인물질인 NOx를 저감함으로써, 궁극적으로 입주자의 건강을 확보하고 쾌적한 주거환경 창출에 기여할 것으로 판단된다.
Recently, particulate matter has been classified as a serious natural disaster in Korea. In fact, the concentration of particulate matter in Seoul is 1.2 to 3.5 times higher than that of major cities in the world, and the danger of particulate matter is emerging as a major threat to public health. A...
Recently, particulate matter has been classified as a serious natural disaster in Korea. In fact, the concentration of particulate matter in Seoul is 1.2 to 3.5 times higher than that of major cities in the world, and the danger of particulate matter is emerging as a major threat to public health. Among the precursor of particulate matter, gaseous substances such as nitrogen oxides(NOx) and sulfur oxides(SOx) account for more than half of the total particulate matter. In particular, in the case of NOx, when it penetrates the body, it causes respiratory-related diseases, is a major cause of acid rain, and is classified as a deadly harmful substance, such as destroying the ozone layer and causing climate change. In this situatio, a TiO2 photocatalytic technology that decomposes NOx by accelerating a catalytic reaction using light as an energy source is emerging. However, there are many examples of commercialization of this photocatalyst technology, mainly in developed countries, but it is a technology that is introduced for the first time in Korea, and clear confirmation and verification of the NOx concentration reduction performance is required for domestic application. In particular, the NOx decomposition performance of the TiO2 photocatalyst has a standard test standard that can be referenced under current laboratory conditions, but there is almost no experimental method for analyzing and measuring the NOx decomposition performance in the field. Therefore, in this study, for the NOx reduction analysis of photocatalytic paints, a laboratory-based NOx analysis experiment, which is a basic experimental standard, and a field experiment were performed in parallel with this experiment. In particular, the field test method was proposed by applying the ISO test method as much as possible to promote the rationality of the experimental method. In addition to these quantitative analysis methods, it was planned to complement the quantitative experimental results by separately conducting a qualitative experiment to directly check the presence and extent of photocatalytic activity through spectroscopic techniques through actual photocatalytic paint surface analysis. First, as a basic experiment, a photoreactor test and wash water test according to the ISO standard test method were performed on the photocatalytic paint for field test to derive the NO removal amount analysis result in the laboratory. As a result of the experiment, it was confirmed that the amount of NO removal by the photoreactor experiment and the amount of NOx elution in the wash water experiment on the same specimen were almost the same, confirming that the two experimental methods had sufficient reliability and objectivity, respectively. In this experiment, the first quantitative field experiment method, the natural light pilot reactor experiment method, was proposed, and the field experiment was performed according to the proposed method. This test method is a field test method that applies the ISO UV-A reactor test in a laboratory environment. It is a field test method that can analyze NOx reduction performance by installing a reactor on a wall coated with photocatalytic paint using natural light in the atmosphere as a light source. Experimental methods were also presented. In addition, through this field experiment, photocatalyst paint with an average light quantity of 10W/m2 and NO removal amount of 1.92μmol/50㎠ in the laboratory, natural light UV average light quantity in the field is 10.8~19.54W/㎡ (1.08~1.95 times the average light quantity of the laboratory) In the case of , the NO removal amount is 1.74~2.48 times, and in the case of 5.52~6.67W/㎡ (0.55~0.67 times the average amount of light in the laboratory), the amount of NO removal is 0.36~0.98 times, confirming the trend that the amount of NO removal and the amount of natural light are generally proportional It was possible to confirm quantitatively that the target photocatalytic paint had NOx concentration removal performance. As this experiment, the second quantitative field experiment method, natural light washing water experiment method, was proposed, and field experiments were performed by this method. This test method is a field test method that applies the ISO UV-A wash water test in a laboratory environment. After exposing the specimen to natural light in the air for a certain period of time, it is washed with distilled water, and the amount of NO removed by quantitatively analyzing the nitrate and nitrite ions in the wash water. It is a field test method to calculate . First, the specimens were manufactured in two types: the standard specimen (5×10㎝) specified in the ISO UV-A washing water test method and the large CRC (Cellulose Fiber Reinforced Cement) board specimen with the size of 80×90㎝. As a result of performing a washing water test on a specimen exposed to natural light for 5 days through this test method, the daily average NO removal amount was 2.83μmol/50㎠·day for a 5×10㎝ ISO standard specimen, and a large specimen with a size of 80×90㎝ 2.04μmol/50㎠·day was confirmed, and in the case of general water-based paint, it was confirmed that there was almost no photocatalytic activity. From the above experimental results, it was considered that quantitative NO removal analysis of photocatalytic exterior paints in natural light conditions would be possible with this field test method. As another main experiment, a surface analysis method borrowed from the chemical field test method was proposed, and field experiments were performed by this method. This test method is a qualitative test method that directly confirms the photocatalytic reaction activity through spectroscopy techniques before and after air exposure and during washing on the surface of the photocatalytic paint, It was confirmed that 92% of fine dust-causing substances such as nitrogen oxides 19%, sulfur oxides 56%, and oxidized volatile organic compounds 19% were distributed on the surface of the photocatalytic paint exposed to natural light for 10 days. In addition, nitric acid and sulfuric acid were not detected in the photocatalytic paint that was not irradiated with natural light, and it was confirmed that nitric acid and sulfuric acid were dissolved in water and disappeared during washing after the photocatalytic oxidation reaction occurred. Through the above studies, it was clearly confirmed that TiO2 photocatalyst-added coatings and paints painted on the exterior walls of apartment houses have significant NOx reduction performance unlike general water-based paints. In addition, if two quantitative experiments according to the laboratory-based ISO standard test method are performed as a basic experiment, and two quantitative field experiments and one qualitative experiment suggested in this experiment are performed, the NOx reduction performance of photocatalytic paints can be objectively identified. was presumed to be In particular, this study has research significance in that it proposes a field experiment method that can be used when a question arises as to whether the performance is realized in the actual field even if excellent photocatalytic technology has been developed and its performance has been proven in laboratory conditions. is fed In addition, if photocatalytic exterior paint is used in apartment houses, it is judged that it will reduce NOx, a substance that causes fine dust, and ultimately contribute to securing the health of residents and creating a comfortable living environment.
Recently, particulate matter has been classified as a serious natural disaster in Korea. In fact, the concentration of particulate matter in Seoul is 1.2 to 3.5 times higher than that of major cities in the world, and the danger of particulate matter is emerging as a major threat to public health. Among the precursor of particulate matter, gaseous substances such as nitrogen oxides(NOx) and sulfur oxides(SOx) account for more than half of the total particulate matter. In particular, in the case of NOx, when it penetrates the body, it causes respiratory-related diseases, is a major cause of acid rain, and is classified as a deadly harmful substance, such as destroying the ozone layer and causing climate change. In this situatio, a TiO2 photocatalytic technology that decomposes NOx by accelerating a catalytic reaction using light as an energy source is emerging. However, there are many examples of commercialization of this photocatalyst technology, mainly in developed countries, but it is a technology that is introduced for the first time in Korea, and clear confirmation and verification of the NOx concentration reduction performance is required for domestic application. In particular, the NOx decomposition performance of the TiO2 photocatalyst has a standard test standard that can be referenced under current laboratory conditions, but there is almost no experimental method for analyzing and measuring the NOx decomposition performance in the field. Therefore, in this study, for the NOx reduction analysis of photocatalytic paints, a laboratory-based NOx analysis experiment, which is a basic experimental standard, and a field experiment were performed in parallel with this experiment. In particular, the field test method was proposed by applying the ISO test method as much as possible to promote the rationality of the experimental method. In addition to these quantitative analysis methods, it was planned to complement the quantitative experimental results by separately conducting a qualitative experiment to directly check the presence and extent of photocatalytic activity through spectroscopic techniques through actual photocatalytic paint surface analysis. First, as a basic experiment, a photoreactor test and wash water test according to the ISO standard test method were performed on the photocatalytic paint for field test to derive the NO removal amount analysis result in the laboratory. As a result of the experiment, it was confirmed that the amount of NO removal by the photoreactor experiment and the amount of NOx elution in the wash water experiment on the same specimen were almost the same, confirming that the two experimental methods had sufficient reliability and objectivity, respectively. In this experiment, the first quantitative field experiment method, the natural light pilot reactor experiment method, was proposed, and the field experiment was performed according to the proposed method. This test method is a field test method that applies the ISO UV-A reactor test in a laboratory environment. It is a field test method that can analyze NOx reduction performance by installing a reactor on a wall coated with photocatalytic paint using natural light in the atmosphere as a light source. Experimental methods were also presented. In addition, through this field experiment, photocatalyst paint with an average light quantity of 10W/m2 and NO removal amount of 1.92μmol/50㎠ in the laboratory, natural light UV average light quantity in the field is 10.8~19.54W/㎡ (1.08~1.95 times the average light quantity of the laboratory) In the case of , the NO removal amount is 1.74~2.48 times, and in the case of 5.52~6.67W/㎡ (0.55~0.67 times the average amount of light in the laboratory), the amount of NO removal is 0.36~0.98 times, confirming the trend that the amount of NO removal and the amount of natural light are generally proportional It was possible to confirm quantitatively that the target photocatalytic paint had NOx concentration removal performance. As this experiment, the second quantitative field experiment method, natural light washing water experiment method, was proposed, and field experiments were performed by this method. This test method is a field test method that applies the ISO UV-A wash water test in a laboratory environment. After exposing the specimen to natural light in the air for a certain period of time, it is washed with distilled water, and the amount of NO removed by quantitatively analyzing the nitrate and nitrite ions in the wash water. It is a field test method to calculate . First, the specimens were manufactured in two types: the standard specimen (5×10㎝) specified in the ISO UV-A washing water test method and the large CRC (Cellulose Fiber Reinforced Cement) board specimen with the size of 80×90㎝. As a result of performing a washing water test on a specimen exposed to natural light for 5 days through this test method, the daily average NO removal amount was 2.83μmol/50㎠·day for a 5×10㎝ ISO standard specimen, and a large specimen with a size of 80×90㎝ 2.04μmol/50㎠·day was confirmed, and in the case of general water-based paint, it was confirmed that there was almost no photocatalytic activity. From the above experimental results, it was considered that quantitative NO removal analysis of photocatalytic exterior paints in natural light conditions would be possible with this field test method. As another main experiment, a surface analysis method borrowed from the chemical field test method was proposed, and field experiments were performed by this method. This test method is a qualitative test method that directly confirms the photocatalytic reaction activity through spectroscopy techniques before and after air exposure and during washing on the surface of the photocatalytic paint, It was confirmed that 92% of fine dust-causing substances such as nitrogen oxides 19%, sulfur oxides 56%, and oxidized volatile organic compounds 19% were distributed on the surface of the photocatalytic paint exposed to natural light for 10 days. In addition, nitric acid and sulfuric acid were not detected in the photocatalytic paint that was not irradiated with natural light, and it was confirmed that nitric acid and sulfuric acid were dissolved in water and disappeared during washing after the photocatalytic oxidation reaction occurred. Through the above studies, it was clearly confirmed that TiO2 photocatalyst-added coatings and paints painted on the exterior walls of apartment houses have significant NOx reduction performance unlike general water-based paints. In addition, if two quantitative experiments according to the laboratory-based ISO standard test method are performed as a basic experiment, and two quantitative field experiments and one qualitative experiment suggested in this experiment are performed, the NOx reduction performance of photocatalytic paints can be objectively identified. was presumed to be In particular, this study has research significance in that it proposes a field experiment method that can be used when a question arises as to whether the performance is realized in the actual field even if excellent photocatalytic technology has been developed and its performance has been proven in laboratory conditions. is fed In addition, if photocatalytic exterior paint is used in apartment houses, it is judged that it will reduce NOx, a substance that causes fine dust, and ultimately contribute to securing the health of residents and creating a comfortable living environment.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.