• 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보


This study has examined closely on the various foundamental conditions for the fitting in steatite porcelain as a industrial porcelain of superior quality, and as a decorated porcelain. The materials consisting of the Kyul Sung talc, and the sea water magnesia clinker power which was produced from Sam Hwa-Hwa Sung, as major constituents have been used, and also used Hyup Jin kaolin as clay minerals to give them plasticity. First, the mixture was made of corresponding in the theoretical composition of enstatite with Kyul sung talc and sea water magnesia clinker, and kaolin was added in various kinds of 1%, 2.5% 5%, 10%, and 20% by weight of the mixture. Next, the mixture was fired at the various temperatures from 1330 to 145$0^{\circ}C$. After we examined closely the physical properties and microstructures, we achieved the results that noted from this study were listed below. 1. The addition amount of kaolin should generally be from 5% to 10% by weight of the mixture to give mixture plasticity in steatite porcelain, but preferably about 20% to consider the firing temperature. 2. The temperature of the optimum firing range is from 1390 C to 142$0^{\circ}C$. 3. A case, which the $A_2$ composition had been fired at 142$0^{\circ}C$, showed a good effect in the strength, but showed a bad result in the absorption. Therefore, the specimens of $A_4$ the composition has excellent in properties of matters when the composition is fired at 142$0^{\circ}C$. Also, we consider that the specimens of the $A_5$ composition, which is fired at 139$0^{\circ}C$, is suitable for the $MgO-SiO_2$ porcelain bodies with respect to the various properties.

참고문헌 (9)

  1. Physical Chemistry of Firing Steatite Ceramics , R. L. Stone;J. L. Stone , J. Am. Ceram. Soc. / v.26,pp.333-334, 1943
  2. Hand Book / v.,pp.1068, 0000
  3. Industrial Ceramics / v.,pp., 0000
  4. Sone Characteristics of Steatite Bodies L.E.Thiess , J. Am. Ceram. Soc. / v.20,pp.311-314, 1937
  5. Nippon Toki , Manufacture of a white porcelain body of high translucency and high strength Japan / v.233,pp.440, 1972
  6. Talc as an Auxiliary Flux in Plastically Formed Ceramics , EMERSON W. EMRICH;RICH-ARD C. HANNON , Ceramic Bulletin / v.43,pp., 1964
  7. Talc as a Body Material , C. W. Parmelee;G. H. Eald win , Trans. Am. Ceram Soc. / v.15,pp.532-46, 1913
  8. Teiuko Tsuji , Ceramics for decorative purpose japan / v.6334,pp., 1956
  9. Notes on the Constitution of Steatite , Hans Thur-nauer;A. R. Rodnguez , J. Am. Ceram. Soc. / v.25,pp.443-450, 1942

이 논문을 인용한 문헌 (2)

  1. 1983. "A Study on the Porcelain Body of $MgO-SiO_2$ System(II)" 요업학회지 = Journal of the Korean Ceramic Society, 20(3): 243~249 
  2. 1984. "Studies on the Effect for the Addition in the Porcelain Body of $MgO-SiO_2$ System" 요업학회지 = Journal of the Korean Ceramic Society, 21(1): 19~26 


원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일