모의폐액으로 제조한 50ppm의 코발트이온을 Fe(III) 및 Al(III)의 응집제와 sodium lauryl sulfate의 계면활성제를 사용하여 흡착 교질 포말부선법으로 제거하였다. 용액의 pH, 계면활성제 농도, Fe(III) 및 Al(III) 농도, 공급기체의 유속 등을 변수로 하여 실험한 결과, Fe(III)를 응집제로 사용한 경우 초기 코발트이온농도 50ppm, pH 8.5, 공급기체유속 $70mell$/min, 제거시간 15분 등의 조건에서 99.8%의 제거율을 나타내었다. 코발트 이온 제거에 앞서 모의폐액에 35% $H_2O_2$를 첨가하여 폐액을 전처리하였다. 그 결과, 최적 pH 및 처리 후 잔존용액의 pH가 낮아졌고, 넓은 범위의 pH에서 높은 제거율을 나타내었다. Fe(III) 50 ppm을 사용하여 코발트이온과 공침시킨 후 20ppm의 Al(III)를 첨가한 결과, Fe(III) 또는 Al(III)를 각각 단독으로 사용하였던 경우에 비하여 제거 가능한 pH 범위가 더욱 더 확대되었다. 이 현상은 zeta potential 의 증가 및 공침효과의 상승요인으로 추측되었다. $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$를 첨가하여 외부이온의 영향을 관찰하였으며, $SO_4^{2-}$가 0.1M 함유된 코발트용액을 Fe(III) 및 Al(III)를 사용하여 처리한 결과 제거효율은 99%를 나타내었다.
모의폐액으로 제조한 50ppm의 코발트이온을 Fe(III) 및 Al(III)의 응집제와 sodium lauryl sulfate의 계면활성제를 사용하여 흡착 교질 포말부선법으로 제거하였다. 용액의 pH, 계면활성제 농도, Fe(III) 및 Al(III) 농도, 공급기체의 유속 등을 변수로 하여 실험한 결과, Fe(III)를 응집제로 사용한 경우 초기 코발트이온농도 50ppm, pH 8.5, 공급기체유속 $70mell$/min, 제거시간 15분 등의 조건에서 99.8%의 제거율을 나타내었다. 코발트 이온 제거에 앞서 모의폐액에 35% $H_2O_2$를 첨가하여 폐액을 전처리하였다. 그 결과, 최적 pH 및 처리 후 잔존용액의 pH가 낮아졌고, 넓은 범위의 pH에서 높은 제거율을 나타내었다. Fe(III) 50 ppm을 사용하여 코발트이온과 공침시킨 후 20ppm의 Al(III)를 첨가한 결과, Fe(III) 또는 Al(III)를 각각 단독으로 사용하였던 경우에 비하여 제거 가능한 pH 범위가 더욱 더 확대되었다. 이 현상은 zeta potential 의 증가 및 공침효과의 상승요인으로 추측되었다. $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$를 첨가하여 외부이온의 영향을 관찰하였으며, $SO_4^{2-}$가 0.1M 함유된 코발트용액을 Fe(III) 및 Al(III)를 사용하여 처리한 결과 제거효율은 99%를 나타내었다.
Simulated waste liquid containing 50 ppm cobalt ion was treated by adsorbing colloidal flotation using Fe(III) or Al(IlI) as flocclant and a sodium lamyl sulfate as a collector. Parameters such as pH, surfactant concentration, Fe(III) or Al(III) concentration, gas flow rate, etc., W앙e considered. Th...
Simulated waste liquid containing 50 ppm cobalt ion was treated by adsorbing colloidal flotation using Fe(III) or Al(IlI) as flocclant and a sodium lamyl sulfate as a collector. Parameters such as pH, surfactant concentration, Fe(III) or Al(III) concentration, gas flow rate, etc., W앙e considered. The flotation with Fe(III) showed 99.8% removal efficiency of cohalt on the conditions of initial cobalt ion concentration 50 ppm, pH 9.5, gas flow rate 70 ml/min, and flotation time 30 min. When the waste solution, was treated with 35% $H_2O_2$ prior to adsorbing colloidal flotation, the optimal pH for removing cobalt shifted m to weak alkaline range and flotation could be applied in wider range of pH as compared to non-use of $H_2O_2$. Additional use of 20 ppm Al(III) after precipitation of 50 ppm Co(II) with 50 ppm Fe(III) made the optimal pH range for preferable flotation w wider. Foreign ions such as, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$ were adopted and their effects were observed. Of which sulfate ion was f found to be detrimental to removal of cob퍼t ion by flotation. Coprecipitation of Co ion with Fe(III) and Al(III) resulted in b better removal efficiency of cobalt IOn 피 the presence of sulfate ion.
Simulated waste liquid containing 50 ppm cobalt ion was treated by adsorbing colloidal flotation using Fe(III) or Al(IlI) as flocclant and a sodium lamyl sulfate as a collector. Parameters such as pH, surfactant concentration, Fe(III) or Al(III) concentration, gas flow rate, etc., W앙e considered. The flotation with Fe(III) showed 99.8% removal efficiency of cohalt on the conditions of initial cobalt ion concentration 50 ppm, pH 9.5, gas flow rate 70 ml/min, and flotation time 30 min. When the waste solution, was treated with 35% $H_2O_2$ prior to adsorbing colloidal flotation, the optimal pH for removing cobalt shifted m to weak alkaline range and flotation could be applied in wider range of pH as compared to non-use of $H_2O_2$. Additional use of 20 ppm Al(III) after precipitation of 50 ppm Co(II) with 50 ppm Fe(III) made the optimal pH range for preferable flotation w wider. Foreign ions such as, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$ were adopted and their effects were observed. Of which sulfate ion was f found to be detrimental to removal of cob퍼t ion by flotation. Coprecipitation of Co ion with Fe(III) and Al(III) resulted in b better removal efficiency of cobalt IOn 피 the presence of sulfate ion.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.