아크릴, 에폭시, 우레탄 및 SBR계 라텍스를 혼합한 에틸렌 비닐아세테이트 에멀젼 수지의 물성에 관한 연구 A Study on the Properties of Ethylene-vinylacetate Emulsion mixed with SBR, Urethane, Epoxy and Acryl Latex원문보기
방수재로 사용하는 EVA에멀젼 수지에 라텍스 형태의 아크릴 수지, 에폭시 수지, 우레탄 수지, SBR 수지를 $0{\sim}50%$ 혼합하여 점성, 건조특성, 경도 등을 실험하였다. 점도는 라텍스함량 20%까지는 현저하게 떨어졌고 그 이상에서는 유사한 점도를 나타내었는데 점도에 가장 영향을 미치는 것은 EVA 수지와의 상용성이었다. 가사시간은 혼합 후 $30{\sim}40분$ 이내인 것으로 나타났는데 가사시간에 가장 영향을 미치는 요인은 시멘트와의 반응성이었다. 지촉건조시간은 에폭시>SBR>우레탄>아크릴의 순서로 나타났는데 수지의 종류와 시멘트의 양에 따라 다른 특성을 나타내었다. 라텍스 혼합물의 경도는 연필경도 $4B{\sim}H$를 나타내었는데 시멘트를 충전했을 때 현저하게 높은 경도를 나타내었다.
방수재로 사용하는 EVA 에멀젼 수지에 라텍스 형태의 아크릴 수지, 에폭시 수지, 우레탄 수지, SBR 수지를 $0{\sim}50%$ 혼합하여 점성, 건조특성, 경도 등을 실험하였다. 점도는 라텍스함량 20%까지는 현저하게 떨어졌고 그 이상에서는 유사한 점도를 나타내었는데 점도에 가장 영향을 미치는 것은 EVA 수지와의 상용성이었다. 가사시간은 혼합 후 $30{\sim}40분$ 이내인 것으로 나타났는데 가사시간에 가장 영향을 미치는 요인은 시멘트와의 반응성이었다. 지촉건조시간은 에폭시>SBR>우레탄>아크릴의 순서로 나타났는데 수지의 종류와 시멘트의 양에 따라 다른 특성을 나타내었다. 라텍스 혼합물의 경도는 연필경도 $4B{\sim}H$를 나타내었는데 시멘트를 충전했을 때 현저하게 높은 경도를 나타내었다.
SBR, polyurethane, acryl and epoxy latex were seperately mixed with ethylene-vinylacetate emulsion(EVA) in the range of $0{\sim}50%$ (wt.% ). For the mixtures, the various physical properties were examined. The viscosity of mixtures was mainly influenced by compatability with EVA emulsion...
SBR, polyurethane, acryl and epoxy latex were seperately mixed with ethylene-vinylacetate emulsion(EVA) in the range of $0{\sim}50%$ (wt.% ). For the mixtures, the various physical properties were examined. The viscosity of mixtures was mainly influenced by compatability with EVA emulsion, was decreased within 20% (wt.% ) of latex content, and showed the similar values over 20% (wt.% ) of latex content. The workable time of cement mixtures was mainly depended on the reactivity with cement. The formation of film could be only within $30{\sim}40$ minutes from mixing cement. The tack-free time of mixtures was influenced by the sorts of resin and the quantity of cement. The slow order of tack-free time was epoxy mixtures>SBR mixtures>urethane mixtures>acryl mixtures. The pencil hardness of mixtures was $4B{\sim}2H$, represented higher value in cement mixtures than in emulsion state.
SBR, polyurethane, acryl and epoxy latex were seperately mixed with ethylene-vinylacetate emulsion(EVA) in the range of $0{\sim}50%$ (wt.% ). For the mixtures, the various physical properties were examined. The viscosity of mixtures was mainly influenced by compatability with EVA emulsion, was decreased within 20% (wt.% ) of latex content, and showed the similar values over 20% (wt.% ) of latex content. The workable time of cement mixtures was mainly depended on the reactivity with cement. The formation of film could be only within $30{\sim}40$ minutes from mixing cement. The tack-free time of mixtures was influenced by the sorts of resin and the quantity of cement. The slow order of tack-free time was epoxy mixtures>SBR mixtures>urethane mixtures>acryl mixtures. The pencil hardness of mixtures was $4B{\sim}2H$, represented higher value in cement mixtures than in emulsion state.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.