강원도 지역 소나무 천연집단의 변이에 관한 연구 - 침엽과 구과의 형태적 특성을 중심으로 - The Variation of Natural Populations of Pinus densiflora S. et Z. in Kangwondo - The Morphological Characteristics of Needle and Cone -원문보기
소나무 천연집단의 변이를 연구하기 위해 1994년 9월(月) 25~27일(日)과 10월(月)1~3일(日)강원도 지역의 13개 소나무 천연집단 [춘천시 효자동(plot 1), 인제군 신남면(plot 2), 인제군 북면(plot 3), 양양군 서면 A(plot 4), 양양군 서면 B(plot 5), 양양군 손양면(plot 6), 고성군 토성면(plot 7), 원주시 신림면(plot 8), 횡성군 둔내면(plot 9), 평창군 진부면(plot 10), 강릉시 소금강 입구(plot 11), 울진군 서면(plot 12), 평창군 미탄면 (plot 13)]을 선발하고 각 집단 별로 20개체를 대상으로 하여 침엽 및 구과의 형태적 특성에 대한 변이를 조사한 결과는 다음과 같다. 1. 침엽의 특성에서 침엽의 길이는 69.3~91.9mm이고, 0.5cm당 거치수는 25.1~28.7개 이고, 기공 열의 수는 배축변에서 4.1~6.2줄이고 향축면에서 2.9~4.6줄이었으며 집단간 및 집단내 개체간에 모두 고도의 유의성이 나타났다. 2. 구과의 특성에서 구과의 길이는 31.1~43.7mm이고, 직경은 20.0~24.1mm이었으며 집단간 및 집단내 개체간에 모두 고도의 유의성이 나타났다. 3. 배축면과 향축면의 기공열의 수는 정의 상관을 보였고, 구과의 길이와 직경간에도 높은 정의 상관이 있었으며, 거치수는 각 특성들과 부의 상관을 보였다. 4. 해안선으로부터의 거리는 침엽의 길이와 거치수와 정의 상관을 보였고, 두 면의 기공열의 수 및 구과 길이와는 부의 상관을 나타냈다. 해발고는 거치수와 정의 상관을 보였으나 두 면의 기공열의 수 및 구과 길이와는 부의 상관을 나타냈고, 침엽의 길이 및 구과 직경과는 어떠한 경향도 인정되지 않았다. 5. 평균연결법에 의한 군집 분석 결과, 거리지수 1.0에서 2개의 무리로 나누는 것이 가능하였는데, I 그룹에 plot 1, 8, 12와 13이 속하였고 II 그룹에 plot 2, 3, 4, 5, 6, 7, 9, 10과 11이 속하였다. 거리지수 0.8 에서는 II 그룹을 다시 plot 2, 3, 9와 11의 군집과 plot 4, 5, 6, 7과 10의 군집으로 나눌 수 있었다.
소나무 천연집단의 변이를 연구하기 위해 1994년 9월(月) 25~27일(日)과 10월(月)1~3일(日)강원도 지역의 13개 소나무 천연집단 [춘천시 효자동(plot 1), 인제군 신남면(plot 2), 인제군 북면(plot 3), 양양군 서면 A(plot 4), 양양군 서면 B(plot 5), 양양군 손양면(plot 6), 고성군 토성면(plot 7), 원주시 신림면(plot 8), 횡성군 둔내면(plot 9), 평창군 진부면(plot 10), 강릉시 소금강 입구(plot 11), 울진군 서면(plot 12), 평창군 미탄면 (plot 13)]을 선발하고 각 집단 별로 20개체를 대상으로 하여 침엽 및 구과의 형태적 특성에 대한 변이를 조사한 결과는 다음과 같다. 1. 침엽의 특성에서 침엽의 길이는 69.3~91.9mm이고, 0.5cm당 거치수는 25.1~28.7개 이고, 기공 열의 수는 배축변에서 4.1~6.2줄이고 향축면에서 2.9~4.6줄이었으며 집단간 및 집단내 개체간에 모두 고도의 유의성이 나타났다. 2. 구과의 특성에서 구과의 길이는 31.1~43.7mm이고, 직경은 20.0~24.1mm이었으며 집단간 및 집단내 개체간에 모두 고도의 유의성이 나타났다. 3. 배축면과 향축면의 기공열의 수는 정의 상관을 보였고, 구과의 길이와 직경간에도 높은 정의 상관이 있었으며, 거치수는 각 특성들과 부의 상관을 보였다. 4. 해안선으로부터의 거리는 침엽의 길이와 거치수와 정의 상관을 보였고, 두 면의 기공열의 수 및 구과 길이와는 부의 상관을 나타냈다. 해발고는 거치수와 정의 상관을 보였으나 두 면의 기공열의 수 및 구과 길이와는 부의 상관을 나타냈고, 침엽의 길이 및 구과 직경과는 어떠한 경향도 인정되지 않았다. 5. 평균연결법에 의한 군집 분석 결과, 거리지수 1.0에서 2개의 무리로 나누는 것이 가능하였는데, I 그룹에 plot 1, 8, 12와 13이 속하였고 II 그룹에 plot 2, 3, 4, 5, 6, 7, 9, 10과 11이 속하였다. 거리지수 0.8 에서는 II 그룹을 다시 plot 2, 3, 9와 11의 군집과 plot 4, 5, 6, 7과 10의 군집으로 나눌 수 있었다.
For the study on the variation of Pinus densiflora S. et Z. natural populations. 13 stands were selected in Kangwondo region in 1994. They were located in Hyoja-Dong, Chunchon-Si [plot 1]; Sinnam-Myun, lnje-Gun [plot 2]; Buk-Myun, lnje-Gun [plot 3]; Seo-Myun, Yangyang-Gun [plot 4 and 5]; Sonyang-Myu...
For the study on the variation of Pinus densiflora S. et Z. natural populations. 13 stands were selected in Kangwondo region in 1994. They were located in Hyoja-Dong, Chunchon-Si [plot 1]; Sinnam-Myun, lnje-Gun [plot 2]; Buk-Myun, lnje-Gun [plot 3]; Seo-Myun, Yangyang-Gun [plot 4 and 5]; Sonyang-Myun, Yangyang-Gun [plot 6]; Toseong-Myun, Goseong-Gun [plot 7]; Synrim-Myun, Wonju-Si [plot 8]; Dunnae-Myun, Hoengsong-Gun [plot 9]; Jinbu-Myun, Pyungchang-Gun [plot 10]; Sogumgang, Kangneung-Si [plot 11]; Seo-Myun, Ulchin-Gun [plot 12]; and Mitan- Myun, Pyungchang-Gun [plot 13]. The morphological characteristics of needles and cones were investigated for twenty individual trees from each population. The results are summarized as follows: 1. Among needle characteristics, length, the number of serration. and the number of stoma row were significantly different among populations and between individuals within a population. They were 69.3~91.9mm, 25.1~28.7 per 0.5cm, and 4.1~6.2 rows for abaxial side and 2.9~4.6 rows for adaxial side, respectively. 2. Among cone characters surveyed. length and diameter were significantly different among populations and between individuals within a population. They were 31.1~43.7mm and 20.0~24.1mm, respectively. 3. A highly positive correlation was observed between the number of stoma row of abaxial side and that of adaxial side. and between length and diameter of cone. But the number of serration was negatively correlated with all traits. 4. The distance from seashore was positively correlated with needle length and the number of serration, but negatively correlated with the number of stoma row and cone length. However, the altitude was positively correlated with the number of serration, but negatively correlated with the number of stoma row and cone length. 5. Cluster analysis using average linkage method for needle and cone characteristics showed two groups to Euclidean distance 1.0. They were group I consisting of plots 1, 8, 12, and 13 and group II of plots 2, 3, 4, 5, 6, 7, 9, 10, and 11. However, group II was divided again to Euclidean distance 0.8, that is a group including plots 2, 3, 9, and 11 and the other group comprising plots 4, 5, 6, 7, and 10.
For the study on the variation of Pinus densiflora S. et Z. natural populations. 13 stands were selected in Kangwondo region in 1994. They were located in Hyoja-Dong, Chunchon-Si [plot 1]; Sinnam-Myun, lnje-Gun [plot 2]; Buk-Myun, lnje-Gun [plot 3]; Seo-Myun, Yangyang-Gun [plot 4 and 5]; Sonyang-Myun, Yangyang-Gun [plot 6]; Toseong-Myun, Goseong-Gun [plot 7]; Synrim-Myun, Wonju-Si [plot 8]; Dunnae-Myun, Hoengsong-Gun [plot 9]; Jinbu-Myun, Pyungchang-Gun [plot 10]; Sogumgang, Kangneung-Si [plot 11]; Seo-Myun, Ulchin-Gun [plot 12]; and Mitan- Myun, Pyungchang-Gun [plot 13]. The morphological characteristics of needles and cones were investigated for twenty individual trees from each population. The results are summarized as follows: 1. Among needle characteristics, length, the number of serration. and the number of stoma row were significantly different among populations and between individuals within a population. They were 69.3~91.9mm, 25.1~28.7 per 0.5cm, and 4.1~6.2 rows for abaxial side and 2.9~4.6 rows for adaxial side, respectively. 2. Among cone characters surveyed. length and diameter were significantly different among populations and between individuals within a population. They were 31.1~43.7mm and 20.0~24.1mm, respectively. 3. A highly positive correlation was observed between the number of stoma row of abaxial side and that of adaxial side. and between length and diameter of cone. But the number of serration was negatively correlated with all traits. 4. The distance from seashore was positively correlated with needle length and the number of serration, but negatively correlated with the number of stoma row and cone length. However, the altitude was positively correlated with the number of serration, but negatively correlated with the number of stoma row and cone length. 5. Cluster analysis using average linkage method for needle and cone characteristics showed two groups to Euclidean distance 1.0. They were group I consisting of plots 1, 8, 12, and 13 and group II of plots 2, 3, 4, 5, 6, 7, 9, 10, and 11. However, group II was divided again to Euclidean distance 0.8, that is a group including plots 2, 3, 9, and 11 and the other group comprising plots 4, 5, 6, 7, and 10.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
본 연구에서는 소나무의 형질이 우수한 강원도 지역을 대상으로 137M 소나무 천연집단을 선발하고 침엽 및 구과의 형태적 특성 변이에 대해 조사·분석하고자 한다.
제안 방법
각 선발목으로부터 22개씩의 침엽을 취하였고 총 5720개의 침엽(22침엽 x 20개체 X13집단)에 대하여 조사하였다. 거치수는 침엽 중앙부분의 0.5cm내에 있는 거치수를, 기공열의 수는 같은 부위에서 침엽의 배축면과 향축면에 대하여 따로 측정하였다.
구과는 한 개체당 22개씩 채취하여 구과의 길이와 직경을 측정하였다.
침엽에서 변이를 보이는 특성은 여러 가지가 있으나 본 연구에서는 침엽의 길이, 거치밀도 및 기공열을 대상으로 분석하였다.
대상 데이터
각 선발목으로부터 22개씩의 침엽을 취하였고 총 5720개의 침엽(22침엽 x 20개체 X13집단)에 대하여 조사하였다. 거치수는 침엽 중앙부분의 0.
강원도 지역의 소나무 천연림을 대상으로 1994년 9月 25~27日 10月 1~3日 두 차례에 걸쳐 13개 소나무 천연집단이 선발되었으며 선발 개체본수는 각 집단 20본씩 총 260본이다.
집단내의 개체선발은 먼저 0.5ha의 조사지를 설정하고 우세목중 20본을 임의로 선발하였다. 다음 표 1과 그림 1은 각 집단의 조사지 개황 및 위치를 나타낸 것이다.
이론/모형
침엽과 구과 특성에 대한 모든 통계적 분석은 SAS (Statistical Analysis System) version 6.12 를 이용하여 실시하였다.
성능/효과
그리고 소나무와 곰솔의 이입교잡에 대한 연구기초로써 본 조사지의 해안선을 따라 분포하는 3개 곰솔집단(양양군 손양면, 강릉시 연곡해수욕장, 삼척군 월천리)의 침엽 및 구과의 동일한 특성을 단순 상관 분석 결과 곰솔집단에서도 표 7의 소나무 특성과 유사한 경향이 나타났으나, 단지 침엽의 길이는 배축면과 향축면의 기공열수에 대해 부의 상관을 나타내었다.
변이계수의 비교에 있어서는 7.73~12.68의 범위를 보였으며, 집단간 및 집단내 개체간에 고도의 유의성이 인정되었다.
변이계수의 비교에 있어서는 9.43~14.19의 범위로 집단간에 차이가 있음을 보였고, 집단간 및 집단내의 개체간에 고도의 유의성이 나타났다.
변이계수의 비교에 있어서는 9.63~12.21의 범위를 보였으며, 집단간 및 집단내 개체간에 고도의 유의성이 인정되었다.
지리적 분포에 있어 해안선으로부터의 거리에 따른 경사 변이는 침엽의 길이와 거치수에서 정의 상관이 있었고, 두 면의 기공열의 수와 구과의 길이와는 부의 상관이 나타났다.
집단평균을 살펴보면 침엽의 배축면과 향축면에서 집단2(인제군 신남면)가 각각 4.1 개와 2.9개로 가장 적고, 집단7(고성군 토성면)이 각각 6.2개와 4.6개로 가장 높게 나타났다.
특히 침엽의 배축면과 향축면의 기공열의 수에서 높은 정의 상관을 보였으며, 구과의 길이와 직경에서도 높은 정의 상관을 나타냈다.
66. 향축면에서 15.53~23.51의 범위로 집단 간에 차이가 컸고, 배축면과 향축면 모두 집단간 및 집단내 개체간에 고도의 유의성이 인정되었다.
후속연구
따라서 본 연구는 앞으로 강원도와 경상북도 북부 지역의 소나무 천연집단을 대상으로 그 모수의 형태적 특성(침엽, 재질, 구과 및 종자)과 또 여기에서 채취한 종자로 길러낸 묘목의 형질을 조사 · 분석함으로써 육종원으로 사용될 수 있는 집단을 확보함과 동시에 장차 유전형질의 규명을 위한 기초 자료를 마련하는 연구로 연결될 수 있을 것이다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.